Post ls -l of your usb drive.
As Jim mentioned, you can not just copy the .img file to a formatted usb.
You have to burn the image to the drive to make it bootable.
JP
On Sat, Apr 27, 2024 at 11:27 PM Jim Hall via Freedos-user <
freedos-user@lists.sourceforge.net> wrote:
> To confirm, you're
Hi Nico,
Are you interested in access to system hardware and files?
Or simply your editor and the files you are using on the usb drive?
And UEFI could be a problem if you are thinking of hardware not in your
control.
FreeDOS _might_ boot anywhere with a keyboard and compatible video, with
your usb
Once you have debugged ALL your batch files you can place `CTTY NUL' before
the command(s) and `CTTY CON' after to avoid output to screen.
See below to find how to chain/call another batch file.
Place the 'CTTY CON' first so you don't forget!
You need to be sure there are no interactive
Hi All
A few weeks ago I used qemu and FreeDOS 1.3rc5 to fdisk and format 2
partitions on a USB3 mounted 128GB ssd.
sudo fdisk -l /dev/sdc
Disk /dev/sdc: 111.79 GiB, 120034121728 bytes, 234441644 sectors
Disk model: SV300S37A12
Units: sectors of 1 * 512 = 512 bytes
Sector size
Greg
Did the gparted computer partition the CF card as GPT? I believe FreeDOS
only recognizes MBR partitions.
On Mon, Jan 4, 2021 at 7:30 AM Greg Gerke via Freedos-user <
freedos-user@lists.sourceforge.net> wrote:
> I was having a similar problem during an install that I think might stem
> from
Remember FAT16 partitions are limited to 2GiB in MS/PC-DOS.
So, drives are limited to 8GiB.
Check out industrial Flash modules or DiskOnModule.
Read a little about them here: http://www.glitchwrks.com/2010/12/16/xtide
Note: Expensive compared to more modern SATA devices.
Hi, lurking here
[When I use a CMD window on the windows 10 disk, I “>echo hello > com1”
worked fine. However, I will try different ports on FreeDOS (My DOS
application only supports com1 & com2).]
Don't have W10 handy, so I tried Vista64 Administrative Command Prompt.
>echo hello > com1
The