does ASPI.SYS by Oak require a ATAPI driver to be loaded first?
Yes. Load xgcdrom or something first, then load aspi.sys. Using
devload worked fine for me.
I hope to get the real system workable but no idea why it hangs. Wish I
knew if the GCDROM/ASPI.SYS combination actually worked, as
Michael Horvath schrieb:
I have PocketDOS installed on my PDA. It loads a bootable version of
FreeDOS from a floppy disk image. I'm having trouble figuring out where
AUTOEXEC.BAT and FDCONFIG.SYS are located on this disk. Where can I find it?
Until now I wasn't aware of the PocketDOS
Hello Bernd,
Bernd Blaauw wrote:
does ASPI.SYS by Oak require a ATAPI driver to be loaded first?
No. Programs like cdrecord and readcd can work without an ATAPI driver.
--
Oleg O. Chukaev
--
Apps built with the
Michael Horvath wrote:
Second question: can anyone recommend a good text-based file manager
that uses few system resources?
Volkov Commander: http://egner-online.de/vc/en/
Robert Riebisch
--
BTTR Software
http://www.bttr-software.de/
Michael Horvath wrote:
ways as a form of copy-protection. I still have my Windows 3.11 disks,
and remember that they were formatted to store more than 1.44MB. IIRC,
simply copying from one disk to another didn't work last time I tried.
You're wrong. ;-) Windows 3.x is OK, but Windows 95
does ASPI.SYS by Oak require a ATAPI driver to be loaded first?
No. Programs like cdrecord and readcd can work without an ATAPI driver.
No they can't if you're using an ATAPI drive. ASPI.SYS won't load if
an ATAPI driver isn't loaded already. ASPI.SYS provides an
ASPI-over-ATAPI interface; it
Bernd Blaauw wrote:
for config.sys only the root of the system is supported, and only the
filenamed CONFIG.SYS and FDCONFIG.SYS (so for floppy most likely
A:\FDCONFIG.SYS or A:\CONFIG.SYS)
for autoexec.bat, it's either AUTOEXEC.BAT or any other batchfile
indicated by a SHELL= line in the
Michael Reichenbach wrote:
I am using ndn, it's good, there is a DPMI32 DOS release. Dunno if it
scales also well on low resources.
http://ndn.muxe.com/
-mr
I am trying ndn. I am able to install it in FreeDOS on Virtual PC on my
XP machine, but in PocketDOS I get the error, Load error:
Are the BLASTER settings described anywhere in detail? VPC says it
emulates the Creative Labs Sound Blaster 16 ISA Plug and Play. Maybe my
settings are wrong.
You can use the GETSB.EXE tool which is contained in HXGUI
(http://www.japheth.de/hx.html). It reads the SB16 mixer status