Hi Marcos,
in case you used an USB mouse with BIOS PS/2 over USB support:
Try a PS/2 mouse or a DOS USB driver instead of BIOS legacy.
4. Holding down keyboard keys while screen refreshes, as
suggested by Larry (doc...@yahoo.com): shift, ctrl and alt
keys cut screen refreshing
Hi Eric,
in case you used an USB mouse with BIOS PS/2 over USB
support: Try a PS/2 mouse or a DOS USB driver instead of
BIOS legacy.
My mouse is not USB. It is a real old one, with a flat plug with
two rows of holes.
4. Holding down keyboard keys while
Hello.
I bought december this month an ACER ASPIRE 7736G laptop.
I made an install of freedos 1.0 from bootable cd following screen instruction
without any problem.
I tried different cdrom driver (XCDROM.SYS, GCDROM.SYS).
I get this message :
No CD-ROM drive to use; GCDROM not loaded.
Op 27-12-2009 19:44, jcd...@free.fr schreef:
No CD-ROM drive to use; GCDROM not loaded.
Any idea.
Note : After booting with freedos bootable cd, I can access to the
cd-rom drive( elterito is loaded in memory ).
Could you try the UIDE cd-rom driver please? it's the most recent work
of
Hello.
As I said to eric auer
Done as suggested.
But some problem still here.
Regards
JC DOLE
in FDCONFIG.SYS
!DOS=HIGH,UMB
!DOSDATA=UMB
DEVICE=C:\FDOS\BIN\HIMEM.EXE
DEVICE=C:\FDOS\BIN\EMM386.EXE NOEMS X=TEST
DEVICEHIGH=C:\FDOS\BIN\XDMA.SYS
Op 27-12-2009 23:42, jcd...@free.fr schreef:
Hello.
As I said to eric auer
Done as suggested.
But some problem still here.
Then I give up as well. I assume your drive is internal, and connected
to SATA like your subject mentions. Does it run in IDE compatibility
mode or in AHCI?
Hello.
As I said to eric auer
Clean up as suggested.
But the problem still there.
in FDCONFIG.SYS
!DOS=HIGH,UMB
!DOSDATA=UMB
DEVICE=C:\FDOS\BIN\HIMEM.EXE
DEVICE=C:\FDOS\BIN\EMM386.EXE NOEMS X=TEST
DEVICEHIGH=C:\DRIVERS\UIDE.SYS /D:L633C
Hi, Eric,
I kind of missed the start of the thread - about which
software are we talking? Why does it take several seconds
to refresh the screen? While the mouse is moving? While
it is not moving? Both?
Included at the end of this message is my original post
and AUTOEXEC.BAT now contains:
lh C:\FDOS\BIN\KEYB.EXE br,850
IIRC I already had suggested to empty it (except CTMOUSE) ;-)
everything from FreeDOS also works under the MS
kernel, and Desi-III is equally fast.
IIRC I had already suggested EDR-DOS or (DR-DOS) kernel.
Also the FAT=16 FreeDOS
My mouse is not USB. It is a real old one, with a flat
plug with two rows of holes.
Serial mouse ;-)
Again, try to save more low memory under FreeDOS.
--
~~~ wow ~~~
--
This SF.Net email is sponsored by the
made an install of freedos 1.0 from bootable cd following
screen instruction without any problem.
Nevertheless, you should update a few things: HIMEM, EMM386, CTMOUSE, ...
Also, throw away XDMA.SYS, it shouldn't be needed and might actually cause
problems.
NO. XDMA 3.1 is good (3.3 is
Hello.
| Does it run in IDE compatibility mode or in AHCI? I don't know.
| But this IS IMPORTANT to know . None of existing DOS drivers supports AHCI.
But How to get this information ? ! ! ! !
= = = = = = = = = = = = = = = =
Acer France support, Acer europe support does not give much
12 matches
Mail list logo
