Lester Vedrox wrote:
Q3) Although DSL connection seems to be ok Arachne browser won't load
any normal web pages. I guess you need a page with minimal content,
like text only. Can someone post a URL that works.
You could try my pages at http://www.bttr-software.de/
By the way: Please turn off
From: tomleem [EMAIL PROTECTED]
A peek at Fdauto.bat shows that your packet-driver aborts loading
I see that my message from Oct-10 is blank on Sourceforge archives page so I
will repost it
here.
--
Thanks, everyone. TCP/IP can be set with BOOTP now and seems to
Thanks, everyone. TCP/IP can be set with BOOTP now and seems to be working ok.
Q1) In Fdauto.bat I load Rtspkt after all other drivers, just before the mouse, not sure if it
matters:
@ECHO OFF
PROMPT $P$G
SET DOSDIR=C:\FDOS
SET NLSDIR=%DOSDIR%\NLS
SET HELPPATH=%DOSDIR%\HELP
SET
Hi Lester,
A peek at Fdauto.bat shows that your packet-driver
aborts loading so i'll suggest you use this value:
RTsPkt *_0x60_* -- RTsPkt.Com (v3.18, 1999-Aug-10)
When it loads, the packet-driver should state very
clearly that it installed OKay (int. vector, etc);
i can display the
tomleem wrote:
Hi Lester,
I wouldn't try to load a shim over an NDIS layer
when all i need is to /get the right/ packet-driver.
:-B
I wouldn't either, but I have at least two computers with
Ethernet chipsets that don't have packet drivers and it
does work...
Mark
Thanks, Eric. RTSPKT loads from Fdauto.bat ok but Arachne still won't work
(unable to initialize tcp/ip).
Here are the specs again:
Connection: DSL, modem + router
Arachne browser: v1.90J1
NIC card: Realtek RTL8139/810x Family Fast Ethernet
Packet Driver: RTSPKT.com
The driver seems to be
