Re: [Freedreno] [PATCH] drm/msm: gpu: Enable zap shader for A5XX

2017-05-10 Thread Rob Clark
On Wed, May 10, 2017 at 7:28 PM, Bjorn Andersson
 wrote:
> On Mon 08 May 13:28 PDT 2017, Jordan Crouse wrote:
>
>> The A5XX GPU powers on in "secure" mode. In secure mode the GPU can
>> only render to buffers that are marked as secure and inaccessible
>> to the kernel and user through a series of hardware protections. In
>> practice secure mode is used to draw things like a UI on a secure
>> video frame.
>>
>> In order to switch out of secure mode the GPU executes a special
>> shader that clears out the GMEM and other sensitve registers and
>> then writes a register. Because the kernel can't be trusted the
>> shader binary is signed and verified and programmed by the
>> secure world. To do this we need to read the MDT header and the
>> segments from the firmware location and put them in memory and
>> present them for approval.
>>
>> For targets without secure support there is an out: if the
>> secure world doesn't support secure then there are no hardware
>> protections and we can freely write the SECVID_TRUST register from
>> the CPU. We don't have 100% confidence that we can query the
>> secure capabilities at run time but we have enough calls that
>> need to go right to give us some confidence that we're at least doing
>> something useful.
>>
>> Of course if we guess wrong you trigger a permissions violation
>> which usually ends up in a system crash but thats a problem
>> that shows up immediately.
>
> Looks good overall, just some minor nits.
>
>>
>> [v2: use child device per Bjorn]
>> [v3: use generic MDT loader per Bjorn]
>
> These lines should go after the --- below

jfyi, drm prefers these above --- so it is retained in the commit msg.
(But yes, for most other subsystems your suggestion would be correct)

BR,
-R

>
>>
>> Signed-off-by: Jordan Crouse 
>> ---
>>  drivers/gpu/drm/msm/adreno/a5xx_gpu.c  | 174 
>> -
>>  drivers/gpu/drm/msm/adreno/a5xx_gpu.h  |   2 +
>>  drivers/gpu/drm/msm/adreno/adreno_device.c |   1 +
>>  drivers/gpu/drm/msm/adreno/adreno_gpu.h|   1 +
>>  4 files changed, 176 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c 
>> b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
>> index 31a9bce..4545064 100644
>> --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
>> @@ -11,6 +11,12 @@
>>   *
>>   */
>>
>> +#include 
>> +#include 
>> +#include 
>> +#include 
>> +#include 
>> +#include 
>>  #include "msm_gem.h"
>>  #include "msm_mmu.h"
>>  #include "a5xx_gpu.h"
>> @@ -18,6 +24,57 @@
>>  extern bool hang_debug;
>>  static void a5xx_dump(struct msm_gpu *gpu);
>>
>> +#define GPU_PAS_ID 13
>> +
>> +static int zap_shader_load_mdt(struct device *dev, const char *fwname)
>> +{
>> + const struct firmware *fw;
>> + phys_addr_t mem_phys;
>> + ssize_t mem_size;
>> + void *mem_region = NULL;
>> + int ret;
>> +
>> + /* Request the MDT file for the firmware */
>> + ret = request_firmware(, fwname, dev);
>> + if (ret) {
>> + DRM_DEV_ERROR(dev, "Unable to load %s\n", fwname);
>> + return ret;
>> + }
>> +
>> + /* Figure out how much memory we need */
>> + mem_size = qcom_mdt_get_size(fw);
>> + if (mem_size < 0) {
>> + ret = mem_size;
>> + goto out;
>> + }
>> +
>> + /* Allocate memory for the firmware image */
>> + mem_region = dma_alloc_coherent(dev, mem_size, _phys, GFP_KERNEL);
>
> Do you ever need to issue an qcom_scm_pas_shutdown() on the GPU? If not
> you can use dmam_alloc_coherent() here and device_unregister() will free
> this memory for you.
>
>> + if (!mem_region) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + /* Load the rest of the MDT */
>> + ret = qcom_mdt_load(dev, fw, fwname, GPU_PAS_ID, mem_region, mem_phys,
>> + mem_size);
>> + if (ret)
>> + goto out;
>> +
>> + /* Send the image to the secure world */
>> + ret = qcom_scm_pas_auth_and_reset(GPU_PAS_ID);
>> + if (ret)
>> + DRM_DEV_ERROR(dev, "Unable to authorize the image\n");
>> +
>> +out:
>> + if (ret && mem_region)
>> + dma_free_coherent(dev, mem_size, mem_region, mem_phys);
>
> You're leaking mem_region on success. Based on the fact that you force
> this memory to live in the peripheral_region I suspect you want to make
> sure that Linux consider it allocated until you remove the device.
>
>> +
>> + release_firmware(fw);
>> +
>> + return ret;
>> +}
>> +
>>  static void a5xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
>>   struct msm_file_private *ctx)
>>  {
>> @@ -304,6 +361,97 @@ static int a5xx_ucode_init(struct msm_gpu *gpu)
>>   return 0;
>>  }
>>
>> +#define SCM_GPU_ZAP_SHADER_RESUME 0
>> +
>> +static int a5xx_zap_shader_resume(struct msm_gpu *gpu)
>> +{
>> + int ret;
>> +
>> + ret = 

Re: [Freedreno] [PATCH] drm/msm: gpu: Enable zap shader for A5XX

2017-05-09 Thread kbuild test robot
Hi Jordan,

[auto build test ERROR on robclark/msm-next]
[also build test ERROR on v4.11 next-20170509]
[if your patch is applied to the wrong git tree, please drop us a note to help 
improve the system]

url:
https://github.com/0day-ci/linux/commits/Jordan-Crouse/drm-msm-gpu-Enable-zap-shader-for-A5XX/20170509-043519
base:   git://people.freedesktop.org/~robclark/linux msm-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget 
https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O 
~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

>> ERROR: "qcom_mdt_load" [drivers/gpu/drm/msm/msm.ko] undefined!
>> ERROR: "qcom_mdt_get_size" [drivers/gpu/drm/msm/msm.ko] undefined!

---
0-DAY kernel test infrastructureOpen Source Technology Center
https://lists.01.org/pipermail/kbuild-all   Intel Corporation


.config.gz
Description: application/gzip
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno