Re: [Freeipa-users] New replica won't accept replication
Go figure. I rebuilt it (again) cleanly, and after starting replication again, while I was madly trying to change the debug level on the new replica...it completed replication this time. Heisenbugs. Gotta love them. (I think this one was in my network somewhere, not your code -- I just couldn't observe it enough and someone must've changed something while I wasn't looking). Bret On 05/21/2014 10:19 PM, Rob Crittenden wrote: Bret Wortman wrote: It takes about 2 minutes. How would you like me to turn debugging on? http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting I'm not sure if you should enable this on both sides of the agreement or not. If you have the ability and don't mind potentially slowing down the working master it might be useful to the 389-ds guys. rob Bret Wortman http://bretwortman.com/ http://twitter.com/BretWortman On May 21, 2014, at 4:26 PM, Rob Crittenden wrote: Bret Wortman wrote: On the new replica (asipa) I see in the access log almost 5000 entries like this: [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 nentries=0 etime=0 And these just repeat, increasing the "op" value until they terminate with this one. The rest of it just looks like informational messages. How long does this take? Is there time to enable replication debugging? That may provide more output. Over on zsipa (the CA master), errors contains: [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set replication log for additional info) [21/May/2014:14:31:06 +] NSMMReplicationPlugin - agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate schema: rc=1 I don't think this is related. I'd run ipa-replica-manage list -v `hostname` and ipa-csreplica-manage list -v `hostname` on the master you generated the replica install file on to see what agreements it has or thinks it has. rob These two lines repeat at intervals for a while. Nothing else leapt out at me. On 05/21/2014 11:04 AM, Rob Crittenden wrote: Bret Wortman wrote: This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn= 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? Check the 389-ds access and error logs on both masters. rob smime.p7s Description: S/MIME Cryptographic Signature ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
Bret Wortman wrote: > It takes about 2 minutes. How would you like me to turn debugging on? http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting I'm not sure if you should enable this on both sides of the agreement or not. If you have the ability and don't mind potentially slowing down the working master it might be useful to the 389-ds guys. rob > > > Bret Wortman > http://bretwortman.com/ > http://twitter.com/BretWortman > >> On May 21, 2014, at 4:26 PM, Rob Crittenden wrote: >> >> Bret Wortman wrote: >>> On the new replica (asipa) I see in the access log almost 5000 entries >>> like this: >>> >>> [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT >>> oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" >>> [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 >>> nentries=0 etime=0 >>> >>> And these just repeat, increasing the "op" value until they terminate >>> with this one. The rest of it just looks like informational messages. >> >> How long does this take? Is there time to enable replication debugging? >> That may provide more output. >> >>> >>> Over on zsipa (the CA master), errors contains: >>> >>> [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema >>> agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set >>> replication log for additional info) >>> [21/May/2014:14:31:06 +] NSMMReplicationPlugin - >>> agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate >>> schema: rc=1 >> >> I don't think this is related. >> >> I'd run ipa-replica-manage list -v `hostname` and ipa-csreplica-manage >> list -v `hostname` on the master you generated the replica install file >> on to see what agreements it has or thinks it has. >> >> rob >> >>> >>> These two lines repeat at intervals for a while. >>> >>> Nothing else leapt out at me. >>> >>> >>> On 05/21/2014 11:04 AM, Rob Crittenden wrote: Bret Wortman wrote: > This occurs on our first attempt to join as a replica. I've erased this > box and rebaselined it but the same thing happens. No network ports > being blocked that we know of, and another replica I created at the same > time installed its replica file without issue. > > asipa is the new replica, zsipa is the ca and original master on which > the replica file was created. > > [24/34]: setting up initial replication > Starting replication, please wait until this has completed > Update in progress, 130 seconds elapsed > Update in progress yet not in progress > > [ipamaster.foo.net] reports: Update failed! Status: [10 Total update > abortedLDAP error: Referral] > > > Your system may be partly configured. > Run /usr/sbin/ipa-server-install --uninstall to clean up. > > Failed to start replication > # > > /var/log/ipareplica-install.log contains this: > > 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache > url=ldaps://asipa.fopo.net:636 conn= instance at 0x4faf170> > 2014-05-21T14:31:08Z DEBUG File > "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", > line 638, in run_script > return_value = main_function() > > File "/usr/sbin/ipa-replica-install", line 663, in main > ds = install_replica_ds(config) > > File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds > ca_file=config.dir + "/ca.crt", > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line > 360 in create_replica > self.start_creation(runtime=60) > > File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", > line 364, in start_creation > method() > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line > 373, in __setup_replica > r_bindpw=self.dm_password() > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", > line 961, in setup_replication > raise RuntimeError("Failed to start replication") > > 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, > exception: RuntimeError: Failed to start replication > > Any guidance on where to start looking? Check the 389-ds access and error logs on both masters. rob >> ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
It takes about 2 minutes. How would you like me to turn debugging on? Bret Wortman http://bretwortman.com/ http://twitter.com/BretWortman > On May 21, 2014, at 4:26 PM, Rob Crittenden wrote: > > Bret Wortman wrote: >> On the new replica (asipa) I see in the access log almost 5000 entries >> like this: >> >> [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT >> oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" >> [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 >> nentries=0 etime=0 >> >> And these just repeat, increasing the "op" value until they terminate >> with this one. The rest of it just looks like informational messages. > > How long does this take? Is there time to enable replication debugging? > That may provide more output. > >> >> Over on zsipa (the CA master), errors contains: >> >> [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema >> agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set >> replication log for additional info) >> [21/May/2014:14:31:06 +] NSMMReplicationPlugin - >> agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate >> schema: rc=1 > > I don't think this is related. > > I'd run ipa-replica-manage list -v `hostname` and ipa-csreplica-manage > list -v `hostname` on the master you generated the replica install file > on to see what agreements it has or thinks it has. > > rob > >> >> These two lines repeat at intervals for a while. >> >> Nothing else leapt out at me. >> >> >> >>> On 05/21/2014 11:04 AM, Rob Crittenden wrote: >>> Bret Wortman wrote: This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn=>>> instance at 0x4faf170> 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? >>> Check the 389-ds access and error logs on both masters. >>> >>> rob > smime.p7s Description: S/MIME cryptographic signature ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
Bret Wortman wrote: > On the new replica (asipa) I see in the access log almost 5000 entries > like this: > > [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT > oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" > [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 > nentries=0 etime=0 > > And these just repeat, increasing the "op" value until they terminate > with this one. The rest of it just looks like informational messages. How long does this take? Is there time to enable replication debugging? That may provide more output. > > Over on zsipa (the CA master), errors contains: > > [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema > agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set > replication log for additional info) > [21/May/2014:14:31:06 +] NSMMReplicationPlugin - > agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate > schema: rc=1 I don't think this is related. I'd run ipa-replica-manage list -v `hostname` and ipa-csreplica-manage list -v `hostname` on the master you generated the replica install file on to see what agreements it has or thinks it has. rob > > These two lines repeat at intervals for a while. > > Nothing else leapt out at me. > > > > On 05/21/2014 11:04 AM, Rob Crittenden wrote: >> Bret Wortman wrote: >>> This occurs on our first attempt to join as a replica. I've erased this >>> box and rebaselined it but the same thing happens. No network ports >>> being blocked that we know of, and another replica I created at the same >>> time installed its replica file without issue. >>> >>> asipa is the new replica, zsipa is the ca and original master on which >>> the replica file was created. >>> >>>[24/34]: setting up initial replication >>> Starting replication, please wait until this has completed >>> Update in progress, 130 seconds elapsed >>> Update in progress yet not in progress >>> >>> [ipamaster.foo.net] reports: Update failed! Status: [10 Total update >>> abortedLDAP error: Referral] >>> >>> >>> Your system may be partly configured. >>> Run /usr/sbin/ipa-server-install --uninstall to clean up. >>> >>> Failed to start replication >>> # >>> >>> /var/log/ipareplica-install.log contains this: >>> >>> 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache >>> url=ldaps://asipa.fopo.net:636 conn=>> instance at 0x4faf170> >>> 2014-05-21T14:31:08Z DEBUG File >>> "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", >>> line 638, in run_script >>> return_value = main_function() >>> >>>File "/usr/sbin/ipa-replica-install", line 663, in main >>> ds = install_replica_ds(config) >>> >>>File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds >>> ca_file=config.dir + "/ca.crt", >>> >>>File >>> "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line >>> 360 in create_replica >>> self.start_creation(runtime=60) >>> >>>File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", >>> line 364, in start_creation >>> method() >>> >>>File >>> "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line >>> 373, in __setup_replica >>> r_bindpw=self.dm_password() >>> >>>File >>> "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", >>> line 961, in setup_replication >>> raise RuntimeError("Failed to start replication") >>> >>> 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, >>> exception: RuntimeError: Failed to start replication >>> >>> Any guidance on where to start looking? >> Check the 389-ds access and error logs on both masters. >> >> rob >> > > ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
Bret Wortman wrote: > ...but it did at least look like they were talking, right? Some level of > replication was happening: > > (before the Netscape Replication Total update Entry began running away > with the logfile): > > [21/May/2014:10:28:52 -0400] conn=2 op=2 RESULT err=0 tag=101 nentries=1 > etime=0 > [21/May/2014:10:28:53 -0400] conn=2 op=3 MOD dn="cn=IPA Version > Replication,cn=Plugins,cn=config" > [21/May/2014:10:28:53 -0400] conn=2 op=3 RESULT err=0 tag=103 nentries=0 > etime=0 > [21/May/2014:10:28:53 -0400] conn=2 op=4 UNBIND That is just a failsafe so if we ever put incompatible data into an IPA server we can prevent it from polluting other servers. We fortunately haven't needed this. rob > > On 05/21/2014 11:40 AM, Bret Wortman wrote: >> On the new replica (asipa) I see in the access log almost 5000 entries >> like this: >> >> [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT >> oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update >> Entry" >> [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 >> nentries=0 etime=0 >> >> And these just repeat, increasing the "op" value until they terminate >> with this one. The rest of it just looks like informational messages. >> >> Over on zsipa (the CA master), errors contains: >> >> [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema >> agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set >> replication log for additional info) >> [21/May/2014:14:31:06 +] NSMMReplicationPlugin - >> agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate >> schema: rc=1 >> >> These two lines repeat at intervals for a while. >> >> Nothing else leapt out at me. >> >> >> >> On 05/21/2014 11:04 AM, Rob Crittenden wrote: >>> Bret Wortman wrote: This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn=>>> instance at 0x4faf170> 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? >>> Check the 389-ds access and error logs on both masters. >>> >>> rob >>> >> >> >> >> >> ___ >> Freeipa-users mailing list >> Freeipa-users@redhat.com >> https://www.redhat.com/mailman/listinfo/freeipa-users > ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
...but it did at least look like they were talking, right? Some level of replication was happening: (before the Netscape Replication Total update Entry began running away with the logfile): [21/May/2014:10:28:52 -0400] conn=2 op=2 RESULT err=0 tag=101 nentries=1 etime=0 [21/May/2014:10:28:53 -0400] conn=2 op=3 MOD dn="cn=IPA Version Replication,cn=Plugins,cn=config" [21/May/2014:10:28:53 -0400] conn=2 op=3 RESULT err=0 tag=103 nentries=0 etime=0 [21/May/2014:10:28:53 -0400] conn=2 op=4 UNBIND On 05/21/2014 11:40 AM, Bret Wortman wrote: On the new replica (asipa) I see in the access log almost 5000 entries like this: [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 nentries=0 etime=0 And these just repeat, increasing the "op" value until they terminate with this one. The rest of it just looks like informational messages. Over on zsipa (the CA master), errors contains: [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set replication log for additional info) [21/May/2014:14:31:06 +] NSMMReplicationPlugin - agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate schema: rc=1 These two lines repeat at intervals for a while. Nothing else leapt out at me. On 05/21/2014 11:04 AM, Rob Crittenden wrote: Bret Wortman wrote: This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn= 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? Check the 389-ds access and error logs on both masters. rob ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users smime.p7s Description: S/MIME Cryptographic Signature ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
On the new replica (asipa) I see in the access log almost 5000 entries like this: [21/May/2014:10:30:58 -0400] conn=4 op=4923 EXT oid="2.16.840.113730.3.5.6" name="Netscape Replication Total update Entry" [21/May/2014:10:30:58 -0400] conn=4 op=4923 RESULT err=0 tag=120 nentries=0 etime=0 And these just repeat, increasing the "op" value until they terminate with this one. The rest of it just looks like informational messages. Over on zsipa (the CA master), errors contains: [21/May/2014:14:31:06 +] NSMMReplciationPlugin - Schema agmt="cn=meToasipa.foo.net" (asipa:389) must not be overwritten(set replication log for additional info) [21/May/2014:14:31:06 +] NSMMReplicationPlugin - agmt="cn=meToasipa.foo.net" (asipa:389) Warning: unable to replicate schema: rc=1 These two lines repeat at intervals for a while. Nothing else leapt out at me. On 05/21/2014 11:04 AM, Rob Crittenden wrote: Bret Wortman wrote: This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn= 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? Check the 389-ds access and error logs on both masters. rob smime.p7s Description: S/MIME Cryptographic Signature ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
Re: [Freeipa-users] New replica won't accept replication
Bret Wortman wrote: > This occurs on our first attempt to join as a replica. I've erased this > box and rebaselined it but the same thing happens. No network ports > being blocked that we know of, and another replica I created at the same > time installed its replica file without issue. > > asipa is the new replica, zsipa is the ca and original master on which > the replica file was created. > > [24/34]: setting up initial replication > Starting replication, please wait until this has completed > Update in progress, 130 seconds elapsed > Update in progress yet not in progress > > [ipamaster.foo.net] reports: Update failed! Status: [10 Total update > abortedLDAP error: Referral] > > > Your system may be partly configured. > Run /usr/sbin/ipa-server-install --uninstall to clean up. > > Failed to start replication > # > > /var/log/ipareplica-install.log contains this: > > 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache > url=ldaps://asipa.fopo.net:636 conn= instance at 0x4faf170> > 2014-05-21T14:31:08Z DEBUG File > "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", > line 638, in run_script > return_value = main_function() > > File "/usr/sbin/ipa-replica-install", line 663, in main > ds = install_replica_ds(config) > > File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds > ca_file=config.dir + "/ca.crt", > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line > 360 in create_replica > self.start_creation(runtime=60) > > File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", > line 364, in start_creation > method() > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line > 373, in __setup_replica > r_bindpw=self.dm_password() > > File > "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", > line 961, in setup_replication > raise RuntimeError("Failed to start replication") > > 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, > exception: RuntimeError: Failed to start replication > > Any guidance on where to start looking? Check the 389-ds access and error logs on both masters. rob ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users
[Freeipa-users] New replica won't accept replication
This occurs on our first attempt to join as a replica. I've erased this box and rebaselined it but the same thing happens. No network ports being blocked that we know of, and another replica I created at the same time installed its replica file without issue. asipa is the new replica, zsipa is the ca and original master on which the replica file was created. [24/34]: setting up initial replication Starting replication, please wait until this has completed Update in progress, 130 seconds elapsed Update in progress yet not in progress [ipamaster.foo.net] reports: Update failed! Status: [10 Total update abortedLDAP error: Referral] Your system may be partly configured. Run /usr/sbin/ipa-server-install --uninstall to clean up. Failed to start replication # /var/log/ipareplica-install.log contains this: 2014-05-21T145:28:56Z DEBUG retrieving schema for SchemaCache url=ldaps://asipa.fopo.net:636 conn=instance at 0x4faf170> 2014-05-21T14:31:08Z DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/usr/sbin/ipa-replica-install", line 663, in main ds = install_replica_ds(config) File "/usr/sbin/ipa-replica-install", line 188, in install_replica_ds ca_file=config.dir + "/ca.crt", File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 360 in create_replica self.start_creation(runtime=60) File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 364, in start_creation method() File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 373, in __setup_replica r_bindpw=self.dm_password() File "/usr/lib/python2.7/site-packages/ipaserver/install/replication.py", line 961, in setup_replication raise RuntimeError("Failed to start replication") 2014-0521T14:31:08Z DEBUG The ipa-replica-install command failed, exception: RuntimeError: Failed to start replication Any guidance on where to start looking? -- *Bret Wortman* http://damascusgrp.com/ http://about.me/wortmanbret smime.p7s Description: S/MIME Cryptographic Signature ___ Freeipa-users mailing list Freeipa-users@redhat.com https://www.redhat.com/mailman/listinfo/freeipa-users