Al,
In a separate email, this problem was resolved by fixing the following 3
mis-configured parameters:
PEF Alert Policy[1]: 01 10 11 00 Disabled(10-18 to enable this PEF
policy)
Lan Param(13) Def gateway MAC: 00 00 00 00 00 00 (set to the correct MAC)
Lan Param(18) Dest type: 01 00 00 00 00 (dest disabled, should be
enabled)
With those fixed, he was able to make it work.
Andy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Al Chu
Sent: Monday, December 03, 2007 11:46 AM
To: Андрей Судаков
Cc: freeipmi-devel@gnu.org
Subject: Re: [Freeipmi-devel] PEF alert policy
Hi,
I don't know the ipmiutil output below. If you can send the output of
pef-config, I might be able to see something that could be wrong in
that.
Al
On Mon, 2007-12-03 at 11:45 +0300, Андрей Судаков wrote:
Hello!
I try to set up BMC alerting - i want setup my host (IBM server) with
FreeBSD to sent alert to my IBM Director's host via snmp.
I try following utilities ftom ports: freeipmi anf ipmitool
I can set IP adreess of BMC controller, netmask, gw, i can set IP
adress of destination host and alert type to PET, but i can't set PEF
alert policy.
'ipmitool pef policy' in null
I've try freeipmi - 'pef-config - o pef_file', setup policy in with
file and load it to bmc controller via 'pef-config --commit -f
pef_file', but nothing cange
How can i enable alert policy? May be i can use RAW?
This is my config, obtained via remote by pefconfig
pefconfig ver 2.4
Opening connection to node 172.16.9.91 ...
Connected to node 172.16.9.91
-- BMC version 1.27, IPMI version 2.0
pefconfig: GetPefEntry ...
PEFilter(01): 01 Temperature event - enabled for alert
PEFilter(02): 07 BIOS event - enabled for alert
PEFilter(03): 08 Power Supply event - enabled for alert
PEFilter(04): 08 Power Supply event - enabled for alert
PEFilter(05): 02 Voltage event - enabled for alert
PEFilter(06): 02 Voltage event - enabled for alert
PEFilter(07): 02 Voltage event - enabled for alert
PEFilter(08): 1b Other event - enabled for alert
PEFilter(09): ff Other event - enabled for alert
PEFilter(10): empty
PEFilter(11): 12 System Restart event - enabled for alert
PEFilter(12): 20 OS Critical Stop event - enabled for alert
PEFilter(13): 09 Power Unit event - enabled for alert
PEFilter(14): 09 Power Unit event - enabled for alert
PEFilter(15): 09 Power Unit event - enabled for alert
PEFilter(16): 09 Power Unit event - enabled for alert
GetPefEntry(6/17): completion code=c9
GetPefEntry(17), ret = -1
GetPefEntry(6/18): completion code=c9
GetPefEntry(18), ret = -1
GetPefEntry(6/19): completion code=c9
GetPefEntry(19), ret = -1
GetPefEntry(6/20): completion code=c9
GetPefEntry(20), ret = -1
PEF Control: 03 PEFenable DoEventMsgs
PEF Actions: 0e PwrDn Reset PwrCyc
PEF Startup Delay: 60 sec
PEF Alert Startup Delay: 60 sec
PEF Alert Policy[1]: 01 10 11 00 Disabled
PEF Alert Policy[2]: 02 00 00 00 Disabled
PEF Alert Policy[3]: 03 00 00 00 Disabled
PEF Alert Policy[4]: 04 00 00 00 Disabled
pefconfig: GetLanEntry for channel 1 ...
Lan Param(0) Set in progress: 01
Lan Param(1) Auth type support: 17 None MD2 MD5 Pswd
Lan Param(2) Auth type enables: 17 17 17 17 00
Lan Param(3) IP address: 172 16 9 91
Lan Param(4) IP addr src: 01 Static
Lan Param(5) MAC addr: 00 14 5e f9 eb ef
Lan Param(6) Subnet mask: 255 255 0 0
Lan Param(7) IPv4 header: 40 40 10
Lan Param(10) BMC grat ARP : 03
Lan Param(11) grat ARP interval: 04
Lan Param(12) Def gateway IP: 172 16 0 1
Lan Param(13) Def gateway MAC: 00 00 00 00 00 00
Lan Param(14) Sec gateway IP: 0 0 0 0
Lan Param(15) Sec gateway MAC: 00 00 00 00 00 00
Lan Param(16) Community string: public
Lan Param(17) Num dest: 04
Lan Param(18) Dest type: 01 00 00 00 00
Lan Param(18) Dest type: 02 00 00 00 00
Lan Param(18) Dest type: 03 80 00 00 00
Lan Param(18) Dest type: 04 00 00 00 00
Lan Param(19) Dest address: 01 00 00 [172 16 6 248] 00 1b fc a3 d0 27
Lan Param(19) Dest address: 02 00 00 [172 16 6 248] ff ff ff ff ff ff
Lan Param(19) Dest address: 03 00 00 [0 0 0 0] ff ff ff ff ff ff
Lan Param(19) Dest address: 04 00 00 [0 0 0 0] ff ff ff ff ff ff
GetLanEntry: completion code=80
GetLanEntry(192), ret = -1
GetLanEntry: completion code=80
GetLanEntry(193), ret = -1
GetLanEntry: completion code=80
GetLanEntry(194), ret = -1
GetChanAcc(lan), ret = 0, new value = 02
Access = Always Avail, PEF Alerts Enabled
Channel Access Mode(Lan): 02 04
GetSOL for channel 1 ...
SOL Enable: 01 enabled
SOL Auth: 82 User
SOL Accum Interval: 1e c8 150 msec
SOL Retry Interval: 07 30 480 msec
SOL nvol Baud Rate: 07 19.2k
SOL vol Baud Rate: 07 19.2k
SOL Payload Access(1,1): 00 00 00 00 disabled
SOL Payload Support(1): 03 00 3f 00 00 00 00 00
Get User Access(1): 04 04 01 34 IPMI, Admin ()
Get User Access(2): 04 04 01 34 IPMI, Admin (USERID)
Get User Access(3): 04 04 01 13 IPMI, Operator
