Hi,
About upstream and downstream bridging, the latest AMC.0 spec clarifies this topic. Under section 3.13: Similarly, the "Send Message" command can be used by an MMC to bridge an IPMI message through the Carrier IPMC to the Shelf Manager. All Carrier IPMCs must support the "Send Message" IPMI command in both bridging directions. And the associated requirement: REQ 3.198 Carrier IPMCs shall bridge a "Send Message" command that targets IPMI messaging Channel 0 to IPMB-0. The intent is to allow an MMC to send a message to the Shelf Manager. ------------------------------------------------------------- Stephane Martin, ing. Kontron Canada Embedded Software Team Leader 616 Cure-Boivin Tel (450) 437-4661 ext: 2349 Boisbriand, Quebec Fax (450) 437-8053 Canada, J7G 2A7 mailto:[EMAIL PROTECTED] http://www.kontron.com The information contained in this document is confidential and the sole property of Kontron Canada Inc. It shall not be used, disclosed to others or reproduced without the express written consent of Kontron Canada Inc. L'information contenue dans le présent document est la propriété de Kontron Canada inc. et est divulguée en toute confidentialité. Cette information ne doit pas être utilisée, divulguée à d'autres personnes ou reproduite sans le consentement écrit explicite de Kontron Canada inc. ------------------------------------------------------------- ________________________________ De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de [EMAIL PROTECTED] Envoyé : 12 mars 2007 10:29 À : [EMAIL PROTECTED]; [EMAIL PROTECTED]; ipmitool-devel@lists.sourceforge.net Cc : freeipmi-devel@gnu.org; [EMAIL PROTECTED]; freeipmi-users@gnu.org; [EMAIL PROTECTED]; [EMAIL PROTECTED] Objet : Re: [Openhpi-devel] ATCA: Query related to Bridging of IpmiCommandsfrom IPMB-L to IPMB-0 Carrier IPMCs have to provide bridging functionality as per AMC specifications. But you seem to be using bridging in "reverse direction" so to say. Typically bridging works in forward direction when Shelf Manager sends a command to MMC via carrier IPMC and MMC responds back. In that case, carrier IPMC handles the bridging function and MMC is unaware of this. As such, support for send message (bridging) command is optional in MMC and that's why you might be facing problems. Which MMC implementation are you using? Regards, - Nitin Wipro Technologies ________________________________ From: Raghavendra G [mailto:[EMAIL PROTECTED] Sent: Saturday, March 10, 2007 7:04 AM To: ipmitool-devel@lists.sourceforge.net Cc: freeipmi-devel@gnu.org; freeipmi-users@gnu.org; [EMAIL PROTECTED]; Pierre Sangouard; [EMAIL PROTECTED]; [EMAIL PROTECTED]; Shireesh Bhat; [EMAIL PROTECTED] Subject: ATCA: Query related to Bridging of Ipmi Commands from IPMB-L to IPMB-0 Hi all, Is it possible to bridge Ipmi Commands from IPMB-L to IPMB-0. Basically I am sending IPMI commands from AMC on a carrier blade to the Shelf Manager. I am trying something similar to below, ipmitool -t 0x20 -m 0x7a raw <Send Message Command to Shelf Manager> where, 0x7a: AMC Address on IPMB-L -t 0x20: IPMC of Carrier blade I am hoping the IPMI commands traverse following path, System Interface on AMC -> IPMC present on Carrier Card, IPMB-L -> Shelf Manager, IPMB-0 Does the IPMCs on Carrier blade have bridging Capability? From IPMI v1.5 spec it seems that only BMC (Shelf Manager) has the bridging capability. If it is possible to bridge commands from IPMB-L to IPMB-0, please point me to the details of parameters to Send Message Command. -- Raghavendra G OpenClovis Solutions, Bangalore +91 9880213025
_______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-devel
