look pal, I am using FreeBSD and it can install php automatically and make
it work! So I dont know also waht that does. I have searched in my WORKING
httpd.conf file for php and found those, and concluded that for php to
work, those must be set also! If you didnt of course set some stuff about
On Thu, 24 Jul 2003, Evren Yurtesen wrote:
Well, I tried to manipulate MySQL to my best.
It is impossible to make date calculation functions inside mysql because
the Expiration Attribute is not stored in date type column.
It is also stupid to get each user to php and manipulate there since
On Thu, 24 Jul 2003 10:41 pm, Bill Thompson wrote:
Hello,
I've been looking through the FAQ and the list archives for some kind of
method to have freeradius disable authentications for users after a number
of failed logins. The only reference I found was a message from 2002
saying that it
On Fri, 25 Jul 2003 12:59 am, Umut Destan wrote:
Peter,
I think there's a typo with the DataType for CiscoNASPort in Table
StopVoIP. It should be perhaps varchar(16) instead of BOOLEAN.
Erm. Has this caused any errors for you or do you just think its a typo??
It is meant to be there as there
Hi,
I have Freeradius-snapshot-20021028 installed. The problem is that it
doesn't log in radacct/detail archive, it doesn'y creat it neither.
The loging in radius.log is Ok.
I execute radiusd as #radiusd -S -A
The importanr options abaut logging in radiusd.conf are ok, in my opinion.
Where
Hi,
I have this log in my Cisco :
1d00h: RADIUS: Initial Transmit tty2 id 35 192.168.1.53:1812,
Access-Request, len 108
1d00h: Attribute 4 6 C0A802EB
1d00h: Attribute 5 6 0002
1d00h: Attribute 26 12 000902067474
1d00h: Attribute 61 6 0005
1d00h:
I'm trying to access the Proxy-to-Realm attribute in a script called via
rlm_exec (the script needs to know where proxied requests have been
sent).
However, I've tried instantiating the script from within the authorize
(after the rlm_realm instantiation) and pre-proxy sections, without any
luck.
Josh Howlett [EMAIL PROTECTED] wrote:
I'm trying to access the Proxy-to-Realm attribute in a script called via
rlm_exec (the script needs to know where proxied requests have been
sent).
See src/main/proxy.c. That attribue is in the configuration items.
rlm_exec *should* allow those
Broussard Philippe [EMAIL PROTECTED] wrote:
...
1d00h: Attribute 26 25 000901137368
...
In Access-Accept, I have two attributes :
6 6 - service-type = administrative_user
26 25 - vendor specific attribute = ?
What represents the value 25 for the VSA ?
Nothing.
On Fri, 25 Jul 2003 11:48 am, diomedes wrote:
Hi,
I have Freeradius-snapshot-20021028 installed.
This is old. Please upgrade to 0.9.0
The problem is that it
doesn't log in radacct/detail archive, it doesn'y creat it neither.
The loging in radius.log is Ok.
I execute radiusd as #radiusd
Hello,
I would like to configure my freeradius 0.8 to search in a LDAP data base using groups. I then tried things on the radiusd.conf file, to use the groupname_attribute, groupmembership_filter, groupmembership_filter,and groupmembership_attribute attributes, but nothing worked.
My concern is
Hi,
I want that an user defined in users file can authenticate himself
directly in enable mode with a switch cisco.
I have read the mail archive and I found this :
You can use a feature that specific user get enable
privilege by default
and doesn't have to type
Hello!
I am using Windows XP client, Cisco 1230B AP, And freeradius-0.9.0 (on
redhat 9.0). I am trying to set up certificate authentication to my
wireless network with the help of the radius server. I have followed the
instructions on http://www.impossiblereflex.com/8021x/eap-tls-HOWTO.htm in
Hi!!!
Is there any way that freeradius send back VSA
atributtes?
Basically I need that freeradius send the VSA
h323-return-code atributte. I am using freeradius-0.7, and I see that it does
not send this VSA back. I use the users file for users.
Thanks
Guillermo
Hi,
I´ve been trying to compile freeradius on a RH7.0, but I always get some errors
Does anyone have FreeRadius RPMs that work with RH7.0?
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Juan Felipe:
Show us the errors, a RPM will not work if you have to connect the
server to different modules like sql, ldap etc.
Saludos
Gustavo
On Fri, 2003-07-25 at 11:25, Juan Felipe Serna Pulgarín wrote:
Hi,
I´ve been trying to compile freeradius on a RH7.0, but I always get some
Evren,
My system is Linux 8.0 running Apache httpd-2.0.40-8. It is in stock
setting.
I have not touched anything in it.
If I have the following lines in /etc/httpd/conf.d/php.conf
LoadModule php4_module modules/libphp4.so
AddModule mod_php4.c
I got the following errors when I stop and
You should really ask this to an Apache or PHP mailing list.
Also I use apache 1.3.x version. That must be the difference.
Make a search from google and use keywords
how to configure php apache 2
Do you have these also in some of your conf files?
The important thing is that you should have
Well, I've searched through the lists, but haven't found anything that
seems to relate to this, so here goes. Please let me know if you've seen
this cross the list and I'll try to look a little harder.
The problem seems to be with a 63-character username in combination with a
16-character
Hi
When I do gmake I get this error:
gcc .libs/radiusdS.o -g -O2 -Wall -D_GNU_SOURCE -DNDEBUG -I../include -o
.libs/radiusd radiusd.o files.o util.o acct.o nas.o log.o valuepair.o
version.o proxy.o exec.o auth.o timestr.o conffile.o modules.o modcall.o
session.o xlat.o threads.o smux.o
At 03:30 PM 7/25/2003, you wrote:
Hi
When I do gmake I get this error:
gcc .libs/radiusdS.o -g -O2 -Wall -D_GNU_SOURCE -DNDEBUG -I../include -o
.libs/radiusd radiusd.o files.o util.o acct.o nas.o log.o valuepair.o
version.o proxy.o exec.o auth.o timestr.o conffile.o modules.o modcall.o
session.o
Thanks for the info, Juan.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Juan Carlos
Oacasio
Sent: Friday, July 25, 2003 1:04 PM
To: [EMAIL PROTECTED]
Subject: RE: dialup_admin
In Apache 2.x php configuration is now in
Alex Chen [EMAIL PROTECTED] wrote:
2. Counter uses 'User-Name' as the key and creates a counter for it.
It looks for a counter attribute, 'Acct-Session-Time', in the accounting
packets and increments the value of this attribute in its DB by the
amount specified in the request.
Are
Guillermo Delmastro [EMAIL PROTECTED] wrote:
When I do gmake I get this error:
...
radiusd.o: In function `main':
/usr/freeradius-0.9.0/src/main/radiusd.c:845: undefined reference to
`total_active_threads'
Build with support for threads.
Alan DeKok.
-
List info/subscribe/unsubscribe?
Assuming you are not using threads, which I was not when I did this
(./configure --without-threads), you should be able to just remove
the reference to that line, and everything should work fine, since
that procedure should be ifdef'd out anyway.
I successfully compiled and installed with
At 04:21 PM 7/25/2003, you wrote:
Guillermo Delmastro [EMAIL PROTECTED] wrote:
When I do gmake I get this error:
...
radiusd.o: In function `main':
/usr/freeradius-0.9.0/src/main/radiusd.c:845: undefined reference to
`total_active_threads'
Build with support for threads.
Alan DeKok.
And
On Fri, Jul 25, 2003 at 04:31:28PM -0500, Chris Brotsos wrote:
And just to confirm...I downloaded 0.9.
Everything is where it should be, and 0.9 compiled fine on Slackware.
Chris
Yes, but slackware is not BSD, which does not ship standard with threading
support. I assume that slackware
I did read the whole thing. I did not include settings of other sections
because
I thought they took too much space in the mail,
but I did uncomment the 'daily' stanza in the accounting section.
Currently I have:
module {
...
counter daily {
filename =
After digging into the rlm_counter code, I finally find out what went wrong.
If there is a setting of 'allowed-servicetype' in the counter configuration,
when the counter module will check for the 'Service-Type' in the accounting
request when accounting stops. If there is no 'Service-Type'
The counter module as a configuration element
'check-name'. In the example shown in radiusd.conf
it is set to Max-Daily-Session. The comment indicates
that this 'Max-Daily-Session' can be specified in
DEFAULT stanza.
I am pretty sure when I tried to set
DEFAULT Max-Daily-Session := 20
in
(I'm assuming all interested developers are _also_ on the
-users list...)
I've just hit the problem others have hit before about the
ippool shrinking for no apparent reason. I'm not sure what
does it exactly, as I'm more interested in the rewrite of
rlm_ippool I proposed earlier and someone else
31 matches
Mail list logo
