This e-mail is never sent unsolicited. If you need to unsubscribe,
follow the instructions at the bottom of the message.
***
Melt the Heart of your loved ones with this beautiful Screen saver from
www.screensaverin.com
* To
I'm using freeradius
0.4 with mysql 3.23.41 on SuSE Linux 7.3 for auth. of dial-up users on an
livingston protmaster 2e.The problem:i added all users into a
group PPPi set the Simultaneous-Use to 1when a user is
connected and another connection is requested by the same user then connection
The message from [EMAIL PROTECTED] to
[EMAIL PROTECTED] was infected.
For this reason, the message was not delivered to the destination.
If you are the sender of the message, please disinfect your computer then send it
again.
If you are the destination of the message, ask the sender to
I'm using freeradius 0.4 with mysql 3.23.41 on SuSE Linux 7.3 for auth. of
dial-up users on an livingston protmaster 2e.
The problem:
i added all users into a group PPP
i set the Simultaneous-Use to 1
when a user is connected and another connection is requested by the same
user then connection
Remote Access to our accounting DB is blocked because of many connection errors as
soon as I start freeradius. But freeradius does account into that DB without errors
except a duplicate entry now and then.
If I do a flush-hosts I can access the DB for some minutes and then I get the same
I have Freeradius 0.5 on redhat 7.1. All is OK. But when I tray to install it on
mandrake 8.2, execution of configure can't termine and I obtein:
[
[root@ray freeradius-0.5]# ./configure
hi all
I met a problem,I use freeradius0.5.
my radiusd debug message looks like:
#
auth: user supplied User-Password matches local User-Password
Sending Access-Accept of id 198 to 127.0.0.1:1025
Service-Type = Framed-User
Framed-Protocol = PPP
Hello,
On Wed, 10 Apr 2002, Chris Parker wrote:
At 08:43 AM 4/10/2002 -0700, Woolworth Mark-P23695 wrote:
I'm currently running freeradius 0.4 on Solaris 8 and everything is
working fine except the Tunnel-Password. My ISP is proxying the
authentication request to my radius server and my
hi
the same for me: the files are never written. nobody seems to know why.
i haven't got any response yet.
however, there are some users, who have ONE entry in the radutmp. for me
not even the file exists :) it's not created. you should probably debug
the code if you want to have a fast reply.
9 16:42:32 2002 : Error: Assertion failed in radiusd.c, line 1232
Tue Apr 9 16:42:32 2002 : Error: MASTER: exit on signal (6)
this is on debian SID also radius spawns as much as is stated in
radiusd.conf childs /more than 256 for about 400 users/
-
List info/subscribe/unsubscribe? See
Error: rlm_sql_authorize: no rows returned from query (no such user)
Error: Assertion failed in radiusd.c, line 1232
Error: MASTER: exit on signal (6)
this is every 4-5s with the latest cvs
with 0.5 it lives about 1-2 min and dies
Error: CHILD: exit on signal (11) :)))
or says
Error:
This e-mail is never sent unsolicited. If you need to unsubscribe,
follow the instructions at the bottom of the message.
***
Melt the Heart of your loved ones with this beautiful Screen saver from
www.screensaverin.com
* To
The message from [EMAIL PROTECTED] to
[EMAIL PROTECTED] was infected.
For this reason, the message was not delivered to the destination.
If you are the sender of the message, please disinfect your computer then send it
again.
If you are the destination of the message, ask the sender to
I have users in a mysql database, set their daily session time at 4 hours
daily. Somehow the limit is not being enforced... Am I missing something?
A script perhaps? I'm using portslave as radius client... Thanks...
_
Peter Santiago
ICQ#: 2890601
More
Hi all,
I wonder whether there has been any effort on trying to hack freeradius to either:
1)implement transport over IPv6
2)fully implement RFC 3162 [RADIUS and IPv6. B. Aboba, G. Zorn, D. Mitton. August
2001.]
Thanks in advance for all your replies.
Juan Miguel
--
Juan Miguel Bocanegra
At 11:10 AM 4/11/2002 +0200, [EMAIL PROTECTED] wrote:
Hello,
On Wed, 10 Apr 2002, Chris Parker wrote:
At 08:43 AM 4/10/2002 -0700, Woolworth Mark-P23695 wrote:
I'm currently running freeradius 0.4 on Solaris 8 and everything is
working fine except the Tunnel-Password. My ISP is proxying
At 11:37 AM 4/11/2002 -0300, Julio Faerman wrote:
I have the following problem :
I have my freeradius server, say RAD_A, that proxies requests to RAD_B
(REALM_B). When i use the radtest utility, everything goes fine. But
when the radius sends the proxied packet, it doesn't work.
What can be
Hello all,
I use freeradius 0.5 and my NAS is a Cisco AS5300.
I test with freeradius and mysql since 2 weeks and I have 2 problems:
The radius server writes the accounting records in the mysql-table, but
the following entries leave blank for all records:
++
AcctUniqueId
This is really weird.
We are migrating our customers from cistron 1.6.6 to freeradius 0.5. All
our customers with Ciscos and Ascends are working just fine. One of our
customers uses USR Total Control units for their NASs.
Seemed like everything was going smooth for them, but they reported
On the total control (assuming it has an HiperARC), you can use the monitor
radius command and test with both cistron radius and freeradius to make totally
sure the same attributes are sent from the radius server to the total control
chassis.
Jeremy Kusnetz a écrit :
This is really weird.
sql.conf is o.k. and with sql tracing I see, that these values are blank.
I think the Cisco AS5300 send not these values.
But how can I configure AS5300 to send the parameters?
In details-file are the following entries:
Thu Apr 11 15:54:34 2002
NAS-IP-Address = 192.168.0.254
This information is quite helpful, but I still have a few more questions.
Again I appreciate the help people have been giving me.
1. Edit your raddb/clients file and add the IP of your NAS in there with the
secret. ( By this you mean the ip of my access points? correct?)
2. In regards adding
We had a simliar problem.. it turned that the Radius server was sending
a MTU of 576. I'm not sure what the default of our HiperARC is, but by
removing that parameter from our Radius replies, we fixed this type of
issue.
Steve.
On the total control (assuming it has an HiperARC), you can use
After searching for many hours, I am still not certain whether this is
possible with FreeRADIUS 0.5. Can FreeRADIUS be configured to respond
to an authenication request with a unique IP address from a pool on the
RADIUS server (I read a snippet somewhere that instructed me to get the
latest
Stefan Immel [EMAIL PROTECTED] wrote:
Remote Access to our accounting DB is blocked because of many connection =
errors as soon as I start freeradius.
What are the error messages? Have you read them? Does reading them
help figure out what the problem is?
Alan DeKok.
-
List
Mohamed L'Hédi ZAHER [EMAIL PROTECTED] wrote:
I have Freeradius 0.5 on redhat 7.1. All is OK. But when I tray to install it on
mandrake 8.2, execution of configure can't termine and I obtein:
[
Atanas Prejdarov [EMAIL PROTECTED] wrote:
or says
Error: WARNING: Unresponsive child (id x) for request xxx
So find out why the child threads are unresponsive. That really
sounds like the cause of the problem.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Atanas Prejdarov [EMAIL PROTECTED] wrote:
9 16:42:32 2002 : Error: Assertion failed in radiusd.c, line 1232
Tue Apr 9 16:42:32 2002 : Error: MASTER: exit on signal (6)
That assertion is there to catch a possible problem with the
server. Without that assertion, the server would continue, do
[EMAIL PROTECTED] (Juan Miguel Bocanegra) wrote:
I wonder whether there has been any effort on trying to hack freeradius to=
either:
1)implement transport over IPv6
Not yet.
2)fully implement RFC 3162 [RADIUS and IPv6. B. Aboba, G. Zorn, D. Mitton.=
August 2001.]
IPv6 addresses can
Andrew Kelaidis [EMAIL PROTECTED] wrote:
I need to customise checkrad script output messages. Can I use freeRADIUS
variables such as $i, in checkrad code?
No. And no such variabl '$i' exists in FreeRADIUS, either.
-
List info/subscribe/unsubscribe? See
Rob Kalmar [EMAIL PROTECTED] wrote:
After searching for many hours, I am still not certain whether this is
possible with FreeRADIUS 0.5.
No.
Can FreeRADIUS be configured to respond to an authenication request
with a unique IP address from a pool on the RADIUS server (I read a
snippet
Ron Grant [EMAIL PROTECTED] wrote:
But I DO know what causes them - they're Session Timer packets -
And not RFC standard...
Well, (33 11) is true, so. I'm off to find out if Ascend
changed the packet code for Session-Timer packets from 33 to
something rational before being gobbled
At 05:35 PM 4/11/2002 -0300, Julio Faerman wrote:
Em Qui, 2002-04-11 às 11:48, Chris Parker escreveu:
At 11:37 AM 4/11/2002 -0300, Julio Faerman wrote:
I have the following problem :
I have my freeradius server, say RAD_A, that proxies requests to RAD_B
(REALM_B). When i use the
This information is quite helpful, but I still have a few more questions.
Again I appreciate the help people have been giving me.
1. Edit your raddb/clients file and add the IP of your NAS in there with the
secret. ( By this you mean the ip of my access points? correct?)
2. In regards adding
Em Qui, 2002-04-11 às 17:44, Chris Parker escreveu:
At 05:35 PM 4/11/2002 -0300, Julio Faerman wrote:
Em Qui, 2002-04-11 às 11:48, Chris Parker escreveu:
At 11:37 AM 4/11/2002 -0300, Julio Faerman wrote:
I have the following problem :
I have my freeradius server, say RAD_A, that
Hi , Im using a Lucent Avaya Wireless COR II router for my wireless clients.
My
authentication works fine but radius doesn't seem to log the Accounting
Info. There's not
much to setup on the router regarding this , it's only asking for the IP and
secret of the radius
server wich I check and it's
At 04:29 PM 11/04/2002 -0400, you wrote:
Ron Grant [EMAIL PROTECTED] wrote:
But I DO know what causes them - they're Session Timer packets -
And not RFC standard...
If I had my way, all of my ISDN and K56 customers would finally come to their senses
and purchase our ADSL services.
TAOS
Title: Message
It goes without
saying that my last message (passwordin logwaswhat was coming
from the NAS, not what was configured)was an id10t moment.
ROFLAM!
--
Michael
Title: Message
When I use the
network inclusive clients config to allow NAS on a given network radius access,
under /var/radacct the nas is named via the IP address. If I were to use single
entries for all these clients I would see the client shorname. I propose (when
network inclusive
Hi every one,
we are having a real trouble setting up Luscent MAX TNT
and free radius. OS is linux.
Can anybody help me here fr setting up MAX TNT with free radius. You can
emil me directly at [EMAIL PROTECTED]
Thanx in advancce
iq
-
List info/subscribe/unsubscribe? See
Than Alan..just checked your response in the previous mail digest. Let me
have a look at that I will get back to the mailing list soon.
Thanks again Alan,
regards,
iq
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello freeradius-users.
It's me again. Can somebody send me dumb minimal data for dial-up
PPP user and dial-up shell user? Thank you.
- ---
With respect,
Ilja mailto:[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
42 matches
Mail list logo
