Ok fine will make it for free; just cover the cost of all our T1 lines for
us.
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Donny Jekels
Sent: Sunday, March 23, 2008 1:55 AM
To: FreeRadius users mailing list
Subject: Re: A good
Hey all, I think it was asked once but I can't find anything in archives.
How can I setup prepaid cards scenario? Basically I want my users to allow
to get access lets say for 30 min in total and then I also want to have
expiration date on the account. Can some help me on setting this thing up?
- counter or sqlcounter; examples in radiusd.conf and Wiki
Ivan Kalik
Kalik Informatika ISP
Dana 28/3/2008, Alex M [EMAIL PROTECTED] piše:
Hey all, I think it was asked once but I can't find anything in archives.
How can I setup prepaid cards scenario? Basically I want my users to allow
to get access
Are we talking about M0n0 as a NAS here? If yes, why not to mod the boxy to
do internal counting of the section and then talk to the radius with final
data?
-Original Message-
From: YvesDM [mailto:[EMAIL PROTECTED]
Sent: Monday, April 09, 2007 11:37 AM
To: Peter Boosten
Cc:
Be careful with\ just SQL Count (*)
Some times NASes terminate local session without radius session termination
(ex: nas was powered off) in this case you may have some users who
technically logged in but that is not true! To avoid that you can select all
users in the interwal between Current time
Yea, after reading that book I barely got able to install the FR.
I would say it tells you more about radius protocol then actual FR
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Thor Spruyt
Sent: Monday, April 16, 2007 5:06 PM
To:
What's your location?
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Jacob Jarick
Sent: Tuesday, April 17, 2007 10:25 PM
To: FreeRadius users mailing list
Subject: Technical support
Hello, Im looking for a company that can provide
Australia Perth.
Current having major issues with ldap authentication (done correctly
as far as I can tell but I dont get replys from forums / mailing
groups) and once that is sorted I need to figure out vlan assignment
bassed on ou or group.
On 4/18/07, Alex M [EMAIL PROTECTED] wrote:
What's your
users with a GID of students to be put onto
vlan2 and users with GID staff to be put onto vlan3
On 4/18/07, Alex M [EMAIL PROTECTED] wrote:
Well we are in New York. So the only way we can help you is to do SSH.
Technically LDAP should work straight forward, unless your DC does not
want
to accept
Hi,
I'm using MySQL to store all configs. I want to reject some comuters by
their MAC address (Calling-Station-Id) Ex: one user keeps creating new
userrnames to avoid administratice actions, so I got bored playing tom and
jerry with him and I just want to bun his MAC address regardless of what
Hey all,
My NAS sends only cleat text password and freeRadius seams to expect CHAP
passwors instead...
How can I configure FR to accespt clear text passwords?
Thanks a lot!
PS: My curent default auth-type = system... i tried local but that did not
help :(
-
List info/subscribe/unsubscribe? See
ok here is the debug info. Note: there is an SQL error which is not a
problem... thats bug in mysql so it will onlyopen connection from second
request. also when i sue the same combination under radius ping with CHAP
all works good but w/o chap nothing works
rad_recv: Access-Request packet
I'm using 1.5
(for some reason cold not install 2.x)
Ok let me se if i can enable PAP
On Mon, Jan 26, 2009 at 3:20 PM, t...@kalik.net wrote:
ok here is the debug info. Note: there is an SQL error which is not a
problem... thats bug in mysql so it will onlyopen connection from second
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 145 with timestamp 497e2a40
Nothing to do. Sleeping until we see a request.
On Mon, Jan 26, 2009 at 3:59 PM, Alex M freerad...@lrcommunications.netwrote:
I'm using 1.5
wow hows thats possible? 8)
My nas has 2 ADIUS servers support, both filds are pointing to the same
location w/ same shared secret :(
I will try to reboot NAS and radius, maybe that would help
On Mon, Jan 26, 2009 at 6:39 PM, t...@kalik.net wrote:
ok I removed the line from ysers sating that
i'm trying to display reply message to users whos passwords get rejected.
so I setup the group and added my test user there. then i went to groupreply
table and added reply message there.
Now when I do my testing is password is ok the message is displayed BUT if
password is incorrect the message
well i found that option in my config file but I cant find documentation in
man :(
How do I implement with MySQL?
Thanks for help!
On Fri, Jan 30, 2009 at 5:05 AM, Alan DeKok al...@deployingradius.comwrote:
Alex M wrote:
i'm trying to display reply message to users whos passwords get rejected
Hi i just tried to add following (as adviced) into my radcheck table in
MySQL:
UserName: DEFAULT
Attribute: Calling-Station-Id
op: ==
Value: 00:0b:6a:xx:xx:xx, Auth-Type := Reject
And it did not work
guessI just can not add value with operator in it, but still how can i
reject user based on
Tried that...
now i'm getting all users rejected regardless of mac address in the given
group :(
How do i set priorities? I though priorities only apply to radreply.
Do I have to set fall through?
Or maybe i did something wrong?
On Fri, Jan 30, 2009 at 5:45 PM, t...@kalik.net wrote:
Hi i
I guess its different in newer version of radius but in my 1.5 the only
table that has PRIO is radgroupreply
and there is table radusergroup instead there is a group called usergroup.
I'm getting fustrated. :(
On Fri, Jan 30, 2009 at 7:32 PM, t...@kalik.net wrote:
Tried that...
now i'm
Dana 31/1/2009, Alex M freerad...@lrcommunications.net piše:
I guess its different in newer version of radius but in my 1.5 the only
table that has PRIO is radgroupreply
and there is table radusergroup instead there is a group called usergroup.
I'm getting fustrated. :(
On Fri, Jan 30
and restart for each
change to it but if it's only 3 users ...
Ivan Kalik
Kalik Informatika ISP
Dana 31/1/2009, Alex M freerad...@lrcommunications.net piše:
damn, upgrade will be painfull for me :(
I guess I will try to use other means to block missbehaving users. At
least
we got only 3
ok well i guess i will do manuall replys for each user :(
So freeRadius 2.x have taken care of my problem and I actually can use SQL
to controll everything?
On Fri, Feb 6, 2009 at 8:07 PM, t...@kalik.net wrote:
yey thats seam to work, but still getting one problem.
So the comp gets bloket
will do
here is the thing... i did all that was sujested and tested on my comps and
gor rejections if my username belong to SQL Group that has reject reply or i
was able to block myyslef by mac address. Well I just looked at the log and
I see that 2 users that bloked by both mac and username,
hey all
we just upgraded from 1.x.x to latest version of FreeRadius
unfortunately its aint working :( well i see config files have changed
dramatically so maybe i did something wrong.
What we did we installed everything, unquoted SQL module in dadiusd.config
add proper MySQL info
When i start in
Ok readclients was not enabled :(
Still enabling that did not help. (I did restart the server after enabling
it ;-)
How do I output screen to file? I tried radiusd -X radius_log.txt but that
just didnt execure anything :(
tnx for helping
On Mon, Sep 28, 2009 at 6:03 PM, Ivan Kalik
So i dont even see any access to my database at all, i see that SQL config
is loaded but no request
Do i have to add any parameters when compiling the code so that we have
support of network functionality?
TNX a lot!
On Mon, Sep 28, 2009 at 7:26 PM, Alex M freerad...@lrcommunications.netwrote
ok so I added sql in instantiate section and it start loading NAS table as
i even saw my NAS ip.
Now im getting error on startup that crushes the server:
=
Failed binding to authentication address * port 1812: Address already in use
dude why cant it just say that like all other programs do that Instance of
the server is already running?
On Tue, Sep 29, 2009 at 12:47 PM, John Dennis jden...@redhat.com wrote:
On 09/29/2009 12:26 PM, Alex M wrote:
ok so I added sql in instantiate section and it start loading NAS
table as i
hey all
we keep upgrading FR servers and i got stuck with problem where I need PAP
(I think) well i need clear text password and its not working for my user.
When i send request through NTRAdping w/ CHAP all works well but when I'm
using device as NAS nothing works :(
I hope some one can point me
Password is in SQL table raddcheck
Also will take a look at that FAQ
I know i had the same problem w. FR 1.5 and there I just had to take out
DEFAULT Auth-Type: system so that we don't look for system password but I
didnt find anything like that on FR 2
On Sun, Oct 18, 2009 at 10:43 AM, Ivan
My SQL include and module authorization is enabled in instantiate section
Im not 100% sure what virtual server do in new radius.
I guess you are probably right about that fact that my radius is not
accsesing SQL to see the users there,.. so since my Include is enabled i
guess i need to figure out
ok now since i know where autorize and authenticate and accounting modules
went i feel much better =)
But I still got small problem, when i run in de debug mode i saw this
warning. I'm not fully sure what it asks me to do? Any advice on this?
++[pap] returns updated
Found Auth-Type = PAP
user password i guess is same as System?
On Mon, Oct 19, 2009 at 11:49 AM, Alan Buxey a.l.m.bu...@lboro.ac.ukwrote:
Hi,
But I still got small problem, when i run in de debug mode i saw this
warning. I'm not fully sure what it asks me to do? Any advice on this?
its fairly clear isnt it?
Hey all, i'm coming back here w/ my old question of how to reject users
based on their MAC address... but now im running FR 2.x.x
So, we have trial access for free, and some people figured that they can
re-register new accounts for trial all over again and have fun this way.
Well thats not fun
wow... i managed to make it work w/ groups but i like your way better =)
Thank you!
On Tue, Dec 15, 2009 at 2:36 AM, Alan DeKok al...@deployingradius.comwrote:
Alex M wrote:
Hey all, i'm coming back here w/ my old question of how to reject users
based on their MAC address... but now im
problem w/ groups so I don't have to edit radius
xinfig files,,, but if im geting this trange results or if its not possible
i'm more or less ok w. adding more settings to configs...
Thanks for helping me out!
On Tue, Dec 15, 2009 at 2:41 PM, Alex M freerad...@lrcommunications.netwrote:
wow... i
...@deployingradius.comwrote:
Alex M wrote:
Well i guess i'm back to my problem :(
I tried group thing and i'm getting som strange un-constant results :(
Can some one tell me how the logic works for groupcheck?
Why? You were given a simple solution. I suggest trying that.
Trying to figure out how to get
to add reply-message to this logic?
Thank you a lot and Marry Xmas
if (Calling-Station-Id == %{sql: SELECT mac FROM `banlist` WHERE
mac='%{Calling-Station-Id}'}) {
reject
#reply := Your account has been disabled.
}
On Wed, Dec 16, 2009 at 4:07 PM, Alex M freerad
o no wonder all my trys didnt work =)
Thanks a lot!
On Fri, Dec 25, 2009 at 7:10 PM, t...@kalik.net wrote:
I need to ask again for help.
So I added this code to Autorize section of Default config file it
blocks banned users well! But I need to tell them why they got banned so
I
Ok I still having trouble with this. Here is my code:
if (Calling-Station-Id == %{sql: SELECT mac FROM `lrc_banlist` WHERE
mac='%{Calling-Station-Id}'}) {
reject
update reply {
{
Reply-Message := Hello Hello Hello
}
}
On Sat, Dec 26, 2009 at 12:08 PM, Alex M freerad...@lrcommunications.netwrote:
lol true! I always use that one for reply messages... i guess i was too
sleepy last night :(
Thank you!
On Sat, Dec 26, 2009 at 11:19 AM
that worked well!
thank you
I guess once reject is sent there is no further processing of the code.
On Sat, Dec 26, 2009 at 1:16 PM, Arran Cudbard-Bell
a.cudbard-b...@sussex.ac.uk wrote:
On 26/12/2009 10:11, Alex M wrote:
As suggested I just tried to replace operator = with := and even
Yes that helped =)
Thank you!
2009/12/27 zhongwei feng feng...@gmail.com
hi ,
try to exchange sequece ?
if (Calling-Station-Id == %{sql: SELECT mac FROM `lrc_banlist` WHERE
mac='%{Calling-Station-Id}'}) {
update reply{
Reply-Message := Hello
Happy New Year to you all!
I have quick question: How can I send default reply to all users that have
incorrect username / password combination, right now FR just rejects them
w/o any message.
I use MySQL i tried to add DEFAULT as user name in rad reply but that did
not help :(
Hope some one can
*To:* FreeRadius users mailing listfreeradius-users@lists.freeradius.org
*Sent:* Monday, January 04, 2010 6:27 AM
*Subject:* Re: Default reply for username incorrect-s
Alex M wrote:
Happy New Year to you all!
I have quick question: How can I send default reply to all users that have
incorrect
Hi, im newbie to Linux, but I was able to install freeradius
to red hat 9.0 and it works with text file.
Then I allow it to use SQL, but is start with error that no
driver is found in libabry, I did everythin was said in FAQ, such as
disable-shared, but that didnr work, that I figured
I tried that but it doesnt work L what can I do?
Let me try to start all over again, I will
do:
Install
Red Hat
Install
MySQL Client
Test
MySQL Clint (How?)
Install
FreeRadius
Allow
use of SQL in config
Run
radiusd X
It
wont work so Ill be
It says thatauth: No authenticate method (Auth-Type) configuration
found for the
request: Rejecting the user
which mean for me that configs are not correct, so brobably because you need
some supplement to jrarius like use of eap too I don't really
-dir
Just as marco said... that shouldnt
be a problem !
Regards,
Edvin Seferovic
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex M
Sent: Sonntag, 23. Oktober 2005
19:40
To: [EMAIL PROTECTED];
'FreeRadius users mailing list'
Subject: RE: meed help on sering
In config file there should be a line that will allow you to go to the next
parameter despite the fact that it alredy found muching record... that's a
theory, that I remember from documentation
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lenir
Sent:
] On Behalf Of Alex M
Sent: Montag, 24. Oktober 2005 04:37
To: 'FreeRadius users mailing list'
Subject: RE: return ALL the AVPs for a username that belongs multiple groups
In config file there should be a line that will allow you to go to the next
parameter despite the fact that it alredy found
Don't know anything about submitting things for a software update, but im
always willing to work on modification projects :-)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Daniel
Corbe
Sent: Monday, October 24, 2005 5:18 PM
To: FreeRadius users
Hi,
Im keeping playing around with mysql manipulation,
and im having trouble to force radius to obtain list of authorized clients
(NASes) from SQL DB, I assume I have to enter NAS info in NAS table (im using
suggested schema that was created automatically by script that came with
Can some one point me to the documentation on use of SQL NAS
table?
So that I can add nas devices to the DB and not a text file?
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
at 12:52 -0400, Alex M wrote:
Can some one point me to the documentation on use of SQL NAS table?
So that I can add nas devices to the DB and not a text file?
...snip...
There has been discussion on this in the past, here is a
message I sent as a response to this list, that might point
you
, October 25, 2005 1:06 PM
To: freeradius-users@lists.freeradius.org
Subject: Re: SQL NAS table
On Tue, 2005-25-10 at 12:52 -0400, Alex M wrote:
Can some one point me to the documentation on use of SQL NAS table?
So that I can add nas devices to the DB and not a text file?
...snip...
There has
Hi
Im having problem with that freeradius doesnt recognize
the clients (NAS) in the NAS table of MySQL.
It keeps throwing me: Unknown client nothing to do
So, I have set up sql.conf to trace mysql qureys in X
debug mode to YES, but I still dont see any qureys shown to the NAS
table
?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Wednesday, October 26, 2005 2:06 PM
To: FreeRadius users mailing list
Subject: Re: cheking mysql requests
Alex M [EMAIL PROTECTED] wrote:
So, I have set up sql.conf to trace mysql qureys in -X
mailing list
Subject: Re: cheking mysql requests
Alex M [EMAIL PROTECTED] wrote:
1. How can I find if server obtained the records from the table?
Read the debug output on startup. Or, send it a packet from a
client configured in SQL. Or, read the sqltrace file, I *think* the
queries
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Wednesday, October 26, 2005 2:27 PM
To: FreeRadius users mailing list
Subject: Re: cheking mysql requests
Alex M [EMAIL PROTECTED] wrote:
1. How can I find if server obtained the records from
Im about to try to do the same but to log
the MAC addresses. Im newbie to freerad, but some times depends on
swiches and routers that you have on your netror, your MAC addrs gets hashed
along the way ( I saw that on MS IAS). So check in logs if you can see
the Mac of the user first,
Hi,
How can I control bandwidth for specific users? And how can
I block all ports except one, for their connection?
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
How can I use Post authentication to control the users
bandwidth???
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Im a newbie here, please tell me where I can find
info on controlling user bandwidth and allowed TCP/IP ports!!
Appreciate your help!!!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
controll
Alex M [EMAIL PROTECTED] wrote:
I'm a newbie here, please tell me where I can find info on controlling
user
bandwidth and allowed TCP/IP ports!!
Read your NAS documentation.
Then, configure FreeRADIUS to send the attributes the NAS expects.
Alan DeKok.
-
List info/subscribe
What is the difference between plain Radius identification
compare to 802.1x?
What are additional functionality that 802.1x gives to
radius?
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Now im totally lost...
Can u give me an example what 802.1x does?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Wednesday, November 02, 2005 11:04 AM
To: FreeRadius users mailing list
Subject: Re: 802.1x
Alex M [EMAIL PROTECTED
: Alex M [EMAIL PROTECTED]
Date: Wed, November 02, 2005 9:10 am
To: 'FreeRadius users mailing list'
freeradius-users@lists.freeradius.org
Now im totally lost...
Can u give me an example what 802.1x does?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
ifDLink claim 802.1x support, then you can configure your NAS
so that you don't get any access without authenticating first.
Rgds,
Guy
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex M
Sent: 02 November 2005 17:04
To: 'FreeRadius users mailing
list'
Subject: RE: 802.1x
need a higher-end
box. I'm not a big proponent of pitchingspecific
productsin this forum. Suffice it to say there are vendors that
will (or attempt) to provide CoS / filtering on Wireless...
jmr
Original Message
Subject: RE: 802.1x
From: Alex M [EMAIL PROTECTED
mailing list'
Subject: RE: 802.1x
Maybe you should learn how to do a research with google ;) or just use an
encyclopedia...
http://en.wikipedia.org/wiki/802.1x
have fun !
Regards,
Edvin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex M
Sent
Hi
Ive noticed while running in debug mode, I can see
the MAC of the NAS, but when I go to the Accounting logs (that are stored in
MySQL) I dont see any place for MAC of the NAS, it only has the space
for NAS IP. So is it possible to make freeradius to log the MAC address of the
nas too?
What is the variable for NAS MAC address, so that I can setup
the rule fot mysql to log the MAC address of the NAS when the client sends
request
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Of Alan DeKok
Sent: Wednesday, March 08, 2006 5:26 PM
To: FreeRadius users mailing list
Subject: Re: accounting of MAC of the NAS
Alex M [EMAIL PROTECTED] wrote:
I've noticed while running in debug mode, I can see the MAC of the NAS,
In what attribute, in what kind of packet?
but when I go
Hm yea interesting idea! Thanks!
I will try that
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Alan DeKok
Sent: Wednesday, March 08, 2006 6:18 PM
To: FreeRadius users mailing list
Subject: Re: accounting of MAC of the NAS
Alex M
Hi
Is the attribute for NAS MAC address is: NAS-Identifier?
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
When I do not use CHAP my password gets rejected, and when I
do use it everything goes OK; but not all my NAS support chap!
So what should I do to configure radius to support NAS that
doesnt send CHAP passwords?
THANKS!
-
List info/subscribe/unsubscribe? See
Hi
I want to use PAP protocol; do I have to set it in Authorization
section? Because there is no commented line for PAP while there is every other
module included.
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
This is because you didn not allow your
radius to accept request from your client with IP 202.117.49.26.
If you are using regular config files you need to edit Clients config, If u are
using MySQL you need to set, radiusd.config to read NAS table im MuSQL (look et
the end of the config
Hi, I have a problem; I always get Access Reject saying that
password is invalid. But when Im using NTRadPing Test Utility, the same username
and password works fine if I check to use CHAP, but when the CHAP check box is
not selected then Im getting the same problem as I have with my NAS.
Alex M [EMAIL PROTECTED] wrote:
I'm using default configuration except I enabled My SQL support.
The error I'm getting in debug mode is this:
rlm_unix: [alexus]: invalid password
Well, if you're going to look at small pieces of the debug log, I
would presume you will only be able
Your MySQL config is in your sql.conf
file, in the beginning you enter all info about username, DB etc also
you have to authorize SQL use in radiusd.conf
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Atkins, Dwane P
Sent: Wednesday, March 15, 2006
11:39 AM
To:
to 192.168.0.107 port 2849
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Alan DeKok
Sent: Wednesday, March 15, 2006 12:51 AM
To: FreeRadius users mailing list
Subject: Re: Authentication problem if CHAP is not used
Alex M
I think you can use radreply directive with your variable, if your NAS
supports that.
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Jeff Stout
Sent: Thursday, March 16, 2006 11:44 AM
To: FreeRadius users mailing list
Subject:
!
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Alan DeKok
Sent: Thursday, March 16, 2006 1:58 AM
To: FreeRadius users mailing list
Subject: Re: Authentication problem if CHAP is not used
Alex M [EMAIL PROTECTED] wrote:
Ok, I here
Is it possible to set directives for some users so that they
only can login to the specific NAS (by the NAS Called Station Id [NAS MAC Address])?
Thanks!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Did u authorize SQL in accounting section?
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Vincent MARGUERIE
Sent: Wednesday, March 22, 2006 4:14 AM
To: freeradius
Subject: Table radacct is empty
Hi,
I've installed freeradius 1.1.1
I've Installed Generic Static Developer RPMs and then compiled FreeRadius,
and works fine...
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Philippe JOYEZ
Sent: Wednesday, March 22, 2006 9:09 AM
To:
:
1. RE: Table radacct is empty (Vincent MARGUERIE)
2. RE: Table radacct is empty (Alex M)
--
Message: 1
Date: Thu, 23 Mar 2006 01:57:27 +0100
From: Vincent MARGUERIE [EMAIL PROTECTED]
Subject: RE: Table radacct is empty
Yes u can hide or crypt passwords in freeradius, this question was raised in
freeradius users mailing list, and if you search archives, the answer is
there
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Corey Burks
Sent: Thursday,
If im not mistaken DWLs should send accounting info. I have to check though.
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Vincent MARGUERIE
Sent: Sunday, March 26, 2006 7:10 PM
To: freeradius
Subject: How Getting accounting
Do you know bugs that this update fixes applies to any installs o n redhat
or only to RPMs?
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Dennis Skinner
Sent: Tuesday, April 04, 2006 9:13 AM
To: FreeRadius users mailing list
I had the same problem on RedHat (well name was the way it supposed to be)
it was caused by some conflict between fr and something with os... still
investigating the problem, but in my case kill and reboot, halt command
where blocked I think that was cased because SSH connection was lost
Ive got strange behavior on y FR, need to find the way to
prevent it, and find out what caused it.
Ive just went to my radius server and found out that it doesnt
want to handle requests. I restarted it in debug and it told me that SQL
module is unknown (was working fine for 1 month) I
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Alan DeKok
Sent: Friday, April 07, 2006 1:53 AM
To: FreeRadius users mailing list
Subject: Re: RADIUS stops responding after a while
Alex M [EMAIL PROTECTED] wrote:
I've just went
I'm using MySQL 4.1.7 and it is located on remote server (not even on the
same subnet as the radius)
-Original Message-
From:
[EMAIL PROTECTED]
.org
[mailto:[EMAIL PROTECTED]
eeradius.org] On Behalf Of Stefan Winter
Sent: Friday, April 07, 2006 5:22 AM
To: FreeRadius users mailing list
Of Peter Nixon
Sent: Friday, April 07, 2006 2:46 PM
To: FreeRadius users mailing list
Subject: Re: RADIUS stops responding after a while
On Fri 07 Apr 2006 20:57, Alex M wrote:
I'm using MySQL 4.1.7 and it is located on remote server (not even on the
same subnet as the radius)
Do you have a statefull
: RADIUS stops responding after a while
Alex M [EMAIL PROTECTED] wrote:
I'm using MySQL 4.1.7 and it is located on remote server (not even on the
same subnet as the radius)
I have seen it before where a firewall drops state, and it looks
like the SQL server is down. New connections go through fine
Alex M [EMAIL PROTECTED] wrote:
What do you mean by Have it do nothing more than log data? And how would
I
do that?
You can configure the SQL module in either the authorize section,
where it will affect user authentication, or in the accounting
section, where it won't affect anything.
Alan
1 - 100 of 109 matches
Mail list logo
