I'm still working on this issue, and decided to take a look at the
openzap code.
First, I figured out that the parameter name for callerid
is enable_callerid rather than enable-callerid.
I also figured out that
this parameter defaults to TRUE (which is coherent with the observed
behaviour on
I recall implementing that back when we released openzap, it should be in there
unless someone chopped it out for some reason. Look for
zap_channel_send_fsk_data
Mike
On Dec 9, 2009, at 6:01 AM, François Legal wrote:
I'm still working on this issue, and decided to take a look at the openzap
I'm already using the latest wanpipe drivers (3.5.8), so yes.
François
On Wed, 2 Dec 2009 13:17:55 -0600, Anthony Minessale wrote:
Did you
also update your wanpipe drivers and rebuild openzap again after you
upgraded it?
On Wed, Dec 2, 2009 at 2:12 AM, François Legal wrote:
So I
did
So I did some tests and still I can not see CLIP on a phone connected to
an FXS port. Whether the call is bridged from SIP UA or from an incoming
call on FXO port does not change anything. Whether the parameter
enable-caller-id=true is present or not in openzap.conf.xml does not change
anything
Did you also update your wanpipe drivers and rebuild openzap again after you
upgraded it?
On Wed, Dec 2, 2009 at 2:12 AM, François Legal de...@thom.fr.eu.org wrote:
So I did some tests and still I can not see CLIP on a phone connected to an
FXS port. Whether the call is bridged from SIP UA or
Sure, I'll try that. I'm just building freeswitch-snapshot that I
downloaded from files.freeswitch.org
I also experience, when bridging a
call from an FXS to FXO the call is cut after a random time (this does not
appear when bridging SIP to FXO). Might this upgrade fix this problem also
?
upgrading always helps *something* not sure. but that is where we have to
start because we have changed that code alot.
On Tue, Dec 1, 2009 at 2:37 AM, François Legal de...@thom.fr.eu.org wrote:
Sure, I'll try that. I'm just building freeswitch-snapshot that I
downloaded from
can you test svn trunk or latest pre release of 1.0.5
On Mon, Nov 30, 2009 at 9:36 AM, François Legal de...@thom.fr.eu.orgwrote:
Hello,
I'm using Freeswitch with a Sangoma A400 card, and I'm having CLIP problems
on the FXS ports.
When I ring on FXS ports, the connected phone does not
