Is 8000 just a dialplan extension? I'm curious about the whole
8...@192.168.10.35 thing. I doubt that's necessary. For kicks try something
like this:
originate loopback/8000 txfax(storage/fax/test.tif)
That will drop the A leg right into extension 8000.
-MC
On Tue, Jun 23, 2009 at 3:12 PM, Tim
On Mon, Jun 22, 2009 at 1:01 PM, Max Bridgewater
max.bridgewa...@gmail.comwrote:
It's nothing. There is no extension like that. Shouldn't this nonetheless
be caught by a regex such as the following?
field=destination_number expression=^242.*
The issue i have here is that it seems that the
Isn't Telco Bridges using it as a switch?
-MC
On Sat, Jun 20, 2009 at 7:58 PM, Nandy Dagondon g...@i.ph wrote:
hi everybody,
i'm interested to know if anyone employed FS as a local exchange switch.
i'm confident FS can handle several calls using RTP by-pass mode. however,
i'm more
Tim,
Look at lines 47 and 48 of the pastebin. I think something goofy is
happening there. What is 8...@x.x.x.x in your system? Is that the receive
fax extension?
-MC
-- Forwarded message --
From: Tim B timb0...@hotmail.com
Date: Fri, Jun 19, 2009 at 7:39 AM
Subject: Re:
, Jun 19, 2009 at 11:43 AM, Michael Collins m...@freeswitch.orgwrote:
Can you turn on debugging (F8) and capture all the output after your
originate? Put it into a pastebin. (pastebin.freeswitch.org)
-MC
On Fri, Jun 19, 2009 at 10:14 AM, Max Bridgewater
max.bridgewa...@gmail.com wrote:
Any
FYI,
Just in case this affects you I wanted to give you all a heads up. With the
new NAT busting code we found some stuff in the default configs that was no
longer applicable and made some changes. Check them out:
http://fisheye.freeswitch.org/changelog/FreeSWITCH/?cs=13874
If you have any
Check out this change:
http://fisheye.freeswitch.org/changelog/FreeSWITCH?cs=13505
Possibly you need to wait for the CHANNEL_HANGUP_COMPLETE event?
-MC
On Fri, Jun 19, 2009 at 2:15 PM, Matthew Fong mattdf...@gmail.com wrote:
I upgraded to 13857 today, but noticed that the channel_hangup event
I'm not aware of any pre-existing software like this. FreeSWITCH has all the
hooks for someone to create the abstraction layers for CSTA, TAPI, VoiceXML,
etc. but no one has ponied up the money to pay for the development...
-MC
2009/6/18 Maxim Tsvetov maxim.tsve...@gmail.com
Hello!
We are
On another email thread Tony mentioned using top -H and then doing a gcore
to locate the process(es) that are sucking up all the resources. Have you
been down that path already?
-MC
On Fri, Jun 19, 2009 at 3:28 PM, Brian West br...@freeswitch.org wrote:
Depends on what you're doing ... or not
, Michael Collins m...@freeswitch.orgwrote:
Max,
that pastebin failed miserably as none of the xml shows up. can you try
again or use our pastebin.freeswitch.org site?
-MC
On Fri, Jun 19, 2009 at 12:58 PM, Max Bridgewater
max.bridgewa...@gmail.com wrote:
Hi Mike,
It's pasted here: http
Can you pastebin your script and your dialplan? There might be some clue
there..
On Fri, Jun 19, 2009 at 3:53 PM, Matthew Fong mattdf...@gmail.com wrote:
some lua event listeners are connecting to mysql with lua..but the
connection is created once, and kept open
the lua ivr's do *not *connect
I am not aware of anyone who will give you free access to any kind of PSTN
network. If you do find someone please let us in on the secret. :)
-MC
On Thu, Jun 18, 2009 at 2:58 AM, Edmar Cruz darklio...@yahoo.com wrote:
Hi is there any possible free sites ip that i can connect so I can could to
Where is the pastebin with all of your configuration files?
-MC
On Thu, Jun 18, 2009 at 2:17 AM, Rudolf Denert rden...@tng.de wrote:
Yes, I removed the tags but with no effect. I think the problem is that the
webserver doesn't look in the directory where featuers.xml is deposited on
the
On Thu, Jun 18, 2009 at 1:03 AM, Bilbo christian.bour...@gmail.com wrote:
Hi,
I would like to use Freeswitch to provide a Video/Voice mail service that
is
integrated with an email service.
I would like to have the ability to email the Video/Voice messages as well
as the SIP users being
On Thu, Jun 18, 2009 at 5:06 AM, selva kumar panse...@gmail.com wrote:
Hi,
I have setup FS for both inbound and outbound.It is working fine.
Now I would like to configure Automatic Call Distribution(ACD).How to
configure it in Freeswitch?
Start with this:
Hello FreeSWITCHers out there! I have it on good authority that the
FreeSWITCH developers have all convened in an undisclosed location. Rumors
that they are plotting to take over the world are not yet confirmed but I
will keep you updated as information becomes available. :)
It would be great for
Thank you so much! The devs are really loving this.
-MC
On Thu, Jun 18, 2009 at 11:40 AM, Saeed Ahmad saeedahmad1...@gmail.comwrote:
Done :)
Guten Appetit
On Thu, Jun 18, 2009 at 5:19 PM, Michael Collins m...@freeswitch.orgwrote:
Hello FreeSWITCHers out there! I have it on good authority
Thanks for all of your help!
On Thu, Jun 18, 2009 at 6:26 PM, Darin Weeks d...@unwire.it wrote:
Thanks! I added a link from the wiki...
http://wiki.freeswitch.org/wiki/Download_FreeSWITCH#Linux
On Thu, Jun 18, 2009 at 1:36 PM, Kristian
Kielhofnerkristian.kielhof...@gmail.com wrote:
Hello
Do you have any way to ensure that those variables are populated? Can you
manually set those in the dialplan? Also, are you doing a leg only or b leg
only or both?
-MC
On Thu, Jun 18, 2009 at 2:54 PM, Lars Zeb larc...@yahoo.com wrote:
I have defined the following template in
Tim,
We need some information, specifically we need you to turn on debugging at
the console and give us the log from start of call to the very end. Go to
the CLI and press F8 (or type console loglevel debug) and then initiate
the call. Capture everything from the CLI from start to finish, then
Another way to view it:
FSAPI or APIs are done at the CLI. (API at the CLI)
dptools or dial plan applications (apps) are done inside the dialplan
So if you have something like api.execute then you would use that to
execute an FSAPI, just as if you'd typed it at the CLI.
On the other hand if you
that you reloadxml (or
press F6) to make sure that your new changes are all properly loaded.
-MC
Lars
*From:* freeswitch-users-boun...@lists.freeswitch.org [mailto:
freeswitch-users-boun...@lists.freeswitch.org] *On Behalf Of *Michael
Collins
*Sent:* Wednesday, June 17, 2009 10:23 AM
Spread the word!
We have need of some volunteers to assist us with various tasks at ClueCon
this year. As you may know, when putting on a conference there are numerous
little things that require attention. Having several designated volunteers
to handle these tasks will make the conference better
I think this question might need to be backed up with some more information.
I recommend you post your relevant configs to pastebin so that we can have a
look. (pastebin.freeswitch.org)
-MC
On Tue, Jun 16, 2009 at 8:17 AM, selva kumar panse...@gmail.com wrote:
Hi,
I've tried configuring the
will
get you registered. Also, sign up at www.cluecon.com so that you can get
updates on speakers, schedules, and sponsors.
If you have any questions at all please feel free to call or email us. We
look forward to seeing you this August!
-Michael Collins
http://www.cluecon.com
Can you describe your networking environment a bit? One thing that can
affect the latency of your voice traffic is your network infrastructure. If
you can isolate FS and some phones on a separate, controlled network then
possibly you can start narrowing it down to other factors.
-MC
On Tue, Jun
What is the big picture application? Reason I ask is that the FS devs and
community have a lot of experience so if they can see the big picture they
might be able to offer better advice.
-MC
On Tue, Jun 16, 2009 at 2:26 PM, Bradley Brashier bjbrash...@gmail.comwrote:
How much power do I have
Perhaps you should look at controlling calls via the FreeSWITCH event socket
instead of from the dialplan. The nice thing about the event socket is that
your call control can happen on a separate machine. There is a PHP module
for the ESL (event socket library) and it would be relatively easy for
On Fri, Jun 12, 2009 at 9:26 AM, Andy a...@fabulous4.co.uk wrote:
Excellent, thanks Anthony, I'll give it a go.
Andy, can you report back on your success with this variable? Also, we would
appreciate it if you could add an entry to the wiki on the channel_variables
page. Let me know if you
Gang,
There have been crazy rumors flying around. Tony sets the record straight.
Please go here now and digg this story:
http://digg.com/software/Anthony_Minessale_of_FreeSWITCH_Discusses_Barracuda_Rumors
Thanks!
-MC
___
Freeswitch-users mailing list
Can you describe your setup? Need to know what kind of OS and hardware is
running FS as well as what kind of phones. Any NAT involved?
-MC
On Fri, Jun 12, 2009 at 3:14 PM, David Burgess apt@gmail.com wrote:
Greetings,
I'm new to freeswitch, just playing with it in a home/small office at
On Fri, Jun 12, 2009 at 3:53 PM, David Burgess apt@gmail.com wrote:
On Fri, Jun 12, 2009 at 4:33 PM, Michael Collinsm...@freeswitch.org
wrote:
Can you describe your setup? Need to know what kind of OS and hardware is
running FS as well as what kind of phones. Any NAT involved?
-MC
On Thu, Jun 11, 2009 at 10:33 AM, Michael Giagnocavo m...@giagnocavo.netwrote:
Exactly. You probably want to have something like this anyways, so that
when someone accidentally unplugs the system, or the disks/CPU/RAM crash,
you’re not stuck.
That is, until FreeSWITCH can record its
On Thu, Jun 11, 2009 at 10:43 AM, jcro...@gmail.com wrote:
Haha, good point on the FreeSwitch Solutions site... Suits - very
professional. =)
Please don't think I'm telling you guys what to do, I know you don't
need that. It IS your software and your site, and you've done a HELL of
a job
On Thu, Jun 11, 2009 at 11:24 AM, John Dalgliesh jo...@defyne.org wrote:
On Thu, 11 Jun 2009 at 10:42 -0700, Michael Collins wrote:
On Thu, Jun 11, 2009 at 10:33 AM, Michael Giagnocavo m...@giagnocavo.net
wrote:
Exactly. You probably want to have something like this anyways, so that
when
On Thu, Jun 11, 2009 at 2:07 PM, Nik Middleton
nik.middle...@noblesolutions.co.uk wrote:
Ok, so I did a mere 86,000 calls today, but when it was all over, I had 6
sessions remaining like the one below (number and ISP changed)
Anyone have an idea why these 6 sessions remain? I also had
On Thu, Jun 11, 2009 at 12:49 PM, Lars Zeb larc...@yahoo.com wrote:
I have a match expression for outbound calls as “\d{10}”. It’s fine for
unformatted numbers. Not knowing any better, I created another extension to
handle numbers formatted like XXX-XXX-, which is easier to read and
On Thu, Jun 11, 2009 at 2:17 PM, John Wehle j...@feith.com wrote:
It appears from some limited testing that the original caller id is
always
shown when the call is transfered. Is there some way to have the person
making the transfer show up as the caller id?
To answer my own question it
Friends,
ClueCon 2009 is fast approaching! We are definitely looking forward to
seeing everyone in Chicago this August. If you haven't finalized your plans
to attend, please do so right away. Time is running out! The early-bird
registration special of $499 per person will expire at the end of
FYI,
I've added a few new posts on the main FreeSWITCH page:
http://www.freeswitch.org/node/190 - OpenSimulator on EC2
http://www.freeswitch.org/node/191 - Rob Smart FS as-home-PBX (U.K.) how-to
Enjoy!
-MC
___
Freeswitch-users mailing list
On Wed, Jun 10, 2009 at 4:54 PM, Lars Zeb larc...@yahoo.com wrote:
Rupa,
I think the console log has information in it that log/freeswitch.log does
not.
Console:
[r...@fs bin]# ../freeswitch
2009-06-10 16:12:50.771529 [INFO] switch_event.c:564 Activate Eventing
Engine.
FYI,
We've had several people inquire about finding someone with whom to share a
room for ClueCon. Please keep in mind that we do have a minimum number of
rooms we need to book with the Wyndham. However, we would hate for someone
not to attend simply because they could not afford a hotel room. To
On Tue, Jun 9, 2009 at 9:14 AM, freeswitch list e...@chabotel.com wrote:
1) How do you setup a gateway where the provider doesn't require a user
name and password? For freeswitch gateways username and password are
mandatory.
Find this line in example.xml:
!--param name=register
On Sun, Jun 7, 2009 at 7:36 AM, Anthony Minessale
anthony.miness...@gmail.com wrote:
once you send myevents you lock on to only that channel's events despite
any other *events* command.
you may want to use the filter feature on the channel's uuid instead.
FYI, I've added this information to
The dialplan :
?xml version=1.0 encoding=utf-8?
!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --
include
context name=mydialplan
extension name=dial1
condition field=destination_number expression=^.*$
You forgot the parens around .*
It should be
To all FreeSWITCHers,
If you have any open issues on JIRA please tend to them ASAP. If you have
any issues that are not yet reported please report them ASAP. If you have
bugs you are not sure about please join IRC and ask for assistance. We are
pushing very hard to get as many bugs resolved as
On Thu, Jun 4, 2009 at 3:34 PM, Matthew Lockwood matthew.lockw...@gmail.com
wrote:
An slightly more graphical install wizard would actually be useful too.
This could be extended into something that could install and configure
FreeSWITCH and install the GUI all at the same time. Talk about
On Thu, Jun 4, 2009 at 2:39 PM, Matthew Lockwood matthew.lockw...@gmail.com
wrote:
I'm about to start creating one. I think FS needs a UI comparable to
FreePBX or similar. It's the next project on my list. It would certainly be
a boost to the FS project and user acceptance.
Be sure to check
On Thu, Jun 4, 2009 at 4:13 PM, Matthew Lockwood matthew.lockw...@gmail.com
wrote:
Okay, leave this with me - I'll bring this together and do what's required.
I'll see if I can squeeze it in ahead of schedule, but don't count on it.
Also expect pleas for help at some stage, and I'll need a UI
Hey everyone, Raymond Chandler (aka Intralanman) and his wife are expecting
a baby boy! Check out the story and how you can help welcome our newest
FreeSWITCH community member:
http://www.freeswitch.org/node/189
-Michael
___
Freeswitch-users mailing
On Thu, Jun 4, 2009 at 6:59 PM, seven dujinf...@gmail.com wrote:
I'm using openzap analog with tone_detect, it works(conference not tested).
however, according to the asterisk book, Kewlstart can detect the busy tone
and disconnect the circuit. does anyone knows how to configure kewlstart
On Thu, Jun 4, 2009 at 6:52 PM, Matthew Lockwood matthew.lockw...@gmail.com
wrote:
That would involve me learning a totally new framework. It'll not the
hardest code I'll ever write by far, so I'm okay coding it up on my own.
However, I definitely need a lot of help from fabulous designers to
On Wed, Jun 3, 2009 at 11:26 AM, Lars Zeb larc...@yahoo.com wrote:
When I type reloadxml at fs console, I get the following message:
freeswi...@fs reloadxml
API CALL [reloadxml()] output:
+OK [[error near line 3182]: unclosed !--]
Do I need to worry about this? Did it accept the
On Tue, Jun 2, 2009 at 9:50 AM, Anthony Minessale
anthony.miness...@gmail.com wrote:
effective_* is *NOT EVER* valid in the dial string. they are settings of
an existing session to control what caller id they pass.
FYI, I've updated the wiki to reflect this fact and to make it completely
5020 phone
(SIP)
AVM Fritz!Box 7170
Siemens Euroset 5020 phone
If necessary I can send my configuration.
Greetz
- Ursprüngliche Mail -
Von: Michael Collins m...@freeswitch.org
An: freeswitch-users@lists.freeswitch.org
Gesendet: Dienstag, 2. Juni 2009 20:18:41 GMT +01:00
/32000
a=fmtp:115 bitrate=48000
a=rtpmap:107 G7221/16000
a=fmtp:107 bitrate=32000
a=rtpmap:9 G722/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:3 GSM/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=rtpmap:13 CN/8000
a=ptime:20
2009/6/3 Michael Collins m
Can you pastebin a simple script that demonstrates the issue? Also, include
any dialplan/configuration changes you use. Finally, please paste in a
sample event with and without the variable in question. Once we have more
information we will see what we can do to help.
-MC
On Sun, May 31, 2009 at
What does your dialplan look like? Just curious where/how you set
proxy-media mode.
-MC
On Mon, Jun 1, 2009 at 9:54 AM, FERNANDO VILLARROEL
fvillarr...@yahoo.comwrote:
Dear all.
I have problem with g729 passthru mode.
I received traffic from a Asterisk on my FS and forward to other
On Mon, Jun 1, 2009 at 10:11 AM, Anthony Minessale
anthony.miness...@gmail.com wrote:
It's always august =D
it's ok. it counts as work!
If you need a letter to your boss we can do that on ClueCon letterhead. :)
-MC
On Mon, Jun 1, 2009 at 11:54 AM, bakko asannu...@gmail.com wrote:
On Mon, Jun 1, 2009 at 3:20 PM, FERNANDO VILLARROEL
fvillarr...@yahoo.comwrote:
Hello the dial plan:
action application=bridge data=sofia/gateway/ubb/$1$2$3/
This i setup from Wikipbx.
What about this in the dialplan?
action application=set data=proxy_media=true/
Or alternatively this
On Wed, May 27, 2009 at 8:00 PM, j3flight jcro...@gmail.com wrote:
Wiki Tax paid...
That was my first contribution to the freeswitch wiki!
MC, you're welcome to have a look over it and see if i made things clear
enough. Feel free to edit.
Nicely done! Thanks for taking the time to create a
On Wed, May 27, 2009 at 8:20 AM, Brian West br...@freeswitch.org wrote:
I'll get the docs section fixed this has changed and will require us to fix
it.
Thanks,
On May 27, 2009, at 10:16 AM, Lars Zeb wrote:
Also, on http://wiki.freeswitch.org/wiki/Mod_cdr_csv, near the bottom of
the page
On Wed, May 27, 2009 at 11:28 AM, Lars Zeb larc...@yahoo.com wrote:
Michael, thanks for fixing the links.
And what about your advice on defining an extension that pertains all
internal extensions (1000-1019) which I have currently put in
conf/dialplan/default.xml? Is there an alternative
On Wed, May 27, 2009 at 3:56 PM, Lars Zeb larc...@yahoo.com wrote:
When I create an xml file in conf/dialplan/default, I assume that it’s
‘inheriting’ its context, right?
Correct. Files in conf/dialplan/default/*xml are included in the default
context while conf/dialplan/public/*xml are
On Wed, May 27, 2009 at 3:51 PM, Neale Banks ne...@lowendale.com.au wrote:
Hi,
We're considering deploying FS instead of a traditional PABX/Key-System in
a small office environment (i.e. primarily non-technical users, 15-20
handsets).
Anyone have any experiences (good/bad/whatever) in this
On Mon, May 25, 2009 at 8:19 AM, Dennis oderm...@googlemail.com wrote:
hi,
we encounter some small problems withing the past 2 days and we are
trying to find out more about the problems. for this we downloaded the
debug logfiles written by fs, but we do not manage to filter all
log-entries
This is totally possible. You need to look at the originate command. Also,
if you have an IVR or a dialplan extension that does what you want - plays
prompts, accepts DTMF digits from caller, etc. - then you can use it with
inbound or outbound calls. For an outbound call just route it to the dp
On Tue, May 26, 2009 at 10:06 AM, François Delawarde
fdelawa...@wirelessmundi.com wrote:
Hi Brian,
Is FreeSWITCH going to have Spanish/French/... sounds as well or do those
need to be?
We have a volunteer who is going to record a set of Spanish prompts. These
would probably be classified
On Tue, May 26, 2009 at 4:56 PM, Anthony Minessale
anthony.miness...@gmail.com wrote:
the easiest way would be the new feature I added to 13442
in the conference profile add
param name=conference-flags value=wait-mod/
to your profile
and in your dialplan
action application=set
Also, in general, do the XML files in config get updated during the ‘make
install’, or are they left as they were from the previous builds?
Running make install or make samples will not overwrite your existing
configuration files. NOTE: This means that when the default configuration
changes
On Fri, May 22, 2009 at 7:58 AM, mszla...@aol.com wrote:
What problems will a Windows user have when updating with Tortoise SVN?
I haven't had a chance to test it out but what I would do is update and then
rebuild solution and see how it goes. Let us know if you run into any
issues.
-MC
Thanks for catching those little glitches!!!
-MC
On Thu, May 21, 2009 at 9:44 AM, Giovanni Maruzzelli gmar...@celliax.orgwrote:
fixed
On Thu, May 21, 2009 at 6:31 PM, Brian West br...@freeswitch.org wrote:
Its an error on the wiki you should have $${domain} in there
/b
On May 21,
FYI,
We just want to let everyone know that we have made a few updates that
will require a rebootstrap. One of the key updates was a security fix
for libsndfile. In this particular case it won't be possible simply to
make current like you normally do. Here is a common set of commands
for
Lars,
Thanks for pointing this out. I will update the wiki. The new way to check
voicemail is to dial 4000 and then enter your extension.
-MC
On Wed, May 20, 2009 at 10:42 AM, Larry Marshall l...@marshap.com wrote:
In the http://wiki.freeswitch.org/wiki/Getting_Started_Guide under Basic
Gang,
Please visit the main FreeSWITCH site and check out the
linkshttp://www.freeswitch.org/node/185to the new ZDNet story.
Please spread the word with all of the link sharing
sites that you have.
Thanks!
Michael S Collins
http://www.cluecon.com
___
i was kinda impressed with the dr. pepper pj's. :)
On Tue, May 19, 2009 at 1:44 PM, Brian West br...@freeswitch.org wrote:
HAHAHAHAHAHAHAHAHAH
/b
On May 19, 2009, at 3:44 PM, Raymond Chandler wrote:
speak for yourself... the Dr. Pepper PJ's are bad enough ;-)
-Ray
Brian West
Had you see this wiki page yet?
http://wiki.freeswitch.org/wiki/Amazon_ec2
-MC
On Tue, May 19, 2009 at 1:23 PM, Erez Simon e...@simonim.com wrote:
Hi,
I want to get a Freeswitch instance running on a hosted service, such as
the Amazon EC2 cloud.
Can anyone help in recommending Freeswitch
On Fri, May 15, 2009 at 3:27 AM, Baskar yudha2...@gmail.com wrote:
*Hi,
Michael Collins
Step1: I get Mobile Number and Extension Number from Database and pass
those value to JavaScript.
*
Who or what needs to get the mobile number and extension from a database?
What happens that leads
I believe we talked about this in the channel last night... Did you try
proxy-media mode?
-MC
On Wed, May 13, 2009 at 3:55 PM, Mailings maili...@kh-dev.de wrote:
Hi,
I just tried FreeSWITCH together with t38modem and HylaFAX.
But when I bridge the call to the modem I get the following
Can you do each operation sequentially? I mean, is it a requirement that the
two parties be bridged together prior to going into the conference room? I'm
curious about the sequence of the calls. Also, what is the big picture of
this application? One caller calls from a mobile phone into extension
Javascript has it's own issues. Tony wrote FreeSWITCH, including the
dialplan parser. The less you can use JS, especially in a high-volume
environment, the better. The happy medium is to use Lua. It is small,
lightweight, easy, and designed to be embedded. Tony has had 3000 Lua
session up
FYI, for those of you keeping up on ClueCon 2009 please visit the latest
blog entry:
http://cluecon.com/node/29
Thanks,
Michael
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
) +
+ … +
+---+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2
*From:* freeswitch-users-boun...@lists.freeswitch.org [mailto:
freeswitch-users-boun...@lists.freeswitch.org] *On Behalf Of *Michael
Collins
*Sent
*From:* freeswitch-users-boun...@lists.freeswitch.org [mailto:
freeswitch-users-boun...@lists.freeswitch.org] *On Behalf Of *Michael
Collins
*Sent:* Friday, May 08, 2009 8:30 AM
*To:* freeswitch-users@lists.freeswitch.org
*Subject:* Re: [Freeswitch-users] Total noob question
Lars,
May I
Thanks for the tip!
-MC
On Fri, May 8, 2009 at 2:20 PM, Andy Spitzer w...@iwoof.org wrote:
Woof!
On Fri, May 8, 2009 at 4:22 PM, Lon Baker l...@kickasspixels.com wrote:
A truly clean install out of the gate.
We took a different approach. Rather than change what FS comes with,
we created
What does your dialplan entry look like? Also, a debug trace and even a sip
trace would be useful. You can use pastepin.freeswitch.org to paste a lot of
stuff in a place where everyone can view it and not overwhelm the email
list.
-MC
On Fri, May 8, 2009 at 12:36 PM, Dale fdh...@gmail.com wrote:
If I understand correctly the OpenVox card is a zaptel clone, which means
you'd need to download the drivers, install them and then do the OpenZAP
install. See the OpenZAP page on the wiki.
-MC
On Thu, May 7, 2009 at 5:46 AM, Fred-145 codecompl...@free.fr wrote:
Hello
I browsed the wiki +
On Thu, May 7, 2009 at 9:26 AM, Fred-145 codecompl...@free.fr wrote:
mercutioviz wrote:
If I understand correctly the OpenVox card is a zaptel clone, which means
you'd need to download the drivers, install them and then do the OpenZAP
install. See the OpenZAP page on the wiki.
Thanks
FYI,
Please update your installations as soon as possible. More information on
this update is available here http://www.freeswitch.org/node/181.
Thanks for all of your feedback - please keep it coming and join us on IRC
if you have any questions about the newest version.
-Michael S Collins
FYI,
Here's a nice story http://www.freeswitch.org/node/182 for you all to
check out. Please check it out and pass it on.
-Michael
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
On Wed, May 6, 2009 at 11:35 AM, Giovanni Maruzzelli gmar...@celliax.orgwrote:
On Wed, May 6, 2009 at 8:23 PM, Michael Collins m...@freeswitch.org
wrote:
FYI,
I made a comment on Dave's blog extolling the virtues of FS and I
mentioned
Skype support. I didn't specifically mention
FYI,
I just wanted to let the community know that we maintain a
bloghttp://cluecon.com/blog/1on the ClueCon
website http://www.cluecon.com. Please check it out. The latest entry
mentions Moises Silva's recent blog entry about his speaking at ClueCon this
year.
Please check the ClueCon blog
On Wed, Apr 29, 2009 at 8:54 AM, Gerry Hull ge...@pstn2.net wrote:
Thanks Guys!
I could not find my problem -- but you pointed me in the correct
direction. I had a mismatched tag in my public.xml in the dialpan.
So, is freeswitch.xml.fsxml a logged representation of the complete config
On Wed, Apr 29, 2009 at 2:13 PM, Mikael Bjerkeland mik...@bjerkeland.comwrote:
None that I know of, but it should be fairly simple to create FOP for FS
with the event socket.
The fairly simple part is actually doing it. The really hard part is
finding the time/energy/inclination to do it...
I just wanted to let everyone know that there are a few blog posts out there
that you FreeSWITCHers might find interesting. Please check out these two
stories on the main FreeSWITCH page:
Another Interesting Use For FreeSWITCH:
OpenSimhttp://www.freeswitch.org/node/175
DIDX Interview With
FYI, here's the correct link to the DIDX interview story on the main page:
http://www.freeswitch.org/node/176
Sorry for the broken link. (Thanks moy!)
-MC
-- Forwarded message --
From: Michael Collins m...@freeswitch.org
Date: Tue, Apr 28, 2009 at 9:27 AM
Subject: FreeSWITCH
FreeSWITCHers,
It's that time of year: ramping up for ClueCon this August 4-6! (
www.cluecon.com) To that end we would like to ask that anyone out there who
has a website to please put up a link to the ClueCon website. We have banner
graphics of various shapes and sizes and I am able to create
FYI,
The FreeSWITCH wiki site has been upgraded to MediWiki version 1.14. Also,
we've migrated the web host and back-end database to our new infrastructure.
All users and edits have been preserved. However, if you notice anything
unusual about the new site please email me off list and we'll get
On Wed, Apr 22, 2009 at 5:20 PM, Chris Fowler ch...@fowler.cc wrote:
Brian, Michael,
Thanks for the help - I had read that but not fully comprehended it until
you spun it the way you did.
Here's what I ended up with - if there's optimization that could be done
let me know. Happy to update
On Thu, Apr 23, 2009 at 4:53 AM, Matthew Fong mattdf...@gmail.com wrote:
There's a reference in the wiki to the sched_del API command, but it
doesn't give an example, and the console doesn't give a syntax either. Does
anyone know it? I'm interested to know how it relates to the group_name
501 - 600 of 1025 matches
Mail list logo