Hi to all,
shortly i'll make a pbx for a customer that uses a couple of isdn bri
lines and, looking for hardware, i've seen that not too much expensive
isdn cards that works well are the ones that uses hfc-4/8s controller
(specifically i'll use a OpenVox B200P that has 2 ISDN ports and use an
I am testing the latest version of nibblebill so let me see if I can help
you with your questions.
jm
On Fri, Oct 9, 2009 at 12:39 AM, Ahmed Munir ahmedmunir...@gmail.comwrote:
I want to ask three questions related to mod_nibble bills, as I'm listing
down below;
1- Can we select/use dynamic
2009/10/9 Ahmed Munir ahmedmunir...@gmail.com:
I want to ask three questions related to mod_nibble bills, as I'm listing
down below;
1- Can we select/use dynamic tables for billing using nibble bill?
2- Can we define more than two tables and attributes in nibblebill.conf.xml?
3- As Nibble
I want to ask three questions related to mod_nibble bills, as I'm listing
down below;
1- Can we select/use dynamic tables for billing using nibble bill?
2- Can we define more than two tables and attributes in nibblebill.conf.xml?
3- As Nibble bill is use to deduct amount of user account, Can we
The wiki page is updated (
http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_att_xfer ). Hope
it is understandable :)
Anatoliy Kounitskiy
On Thu, Aug 27, 2009 at 9:30 PM, Michael Collinsm...@freeswitch.org wrote:
Thanks! I'll be in touch to help you if you need any wiki editing
assistance.
Thanks! I made very minor changes. We appreciate you helping out with
documenting new features.
-MC
On Fri, Aug 28, 2009 at 4:13 AM, Anatoliy Kounitskiy
anato...@kounitskiy.com wrote:
The wiki page is updated (
http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_att_xfer ). Hope
it is
Just for information - the idea :
A---calls--- B ---att_xfer--- C, B hangs C up and goes back to A
( I`m sorry C is not answering :) )
dialplan:
---
extension name=local_number
condition field=${toll_allow} expression=local/
condition field=destination_number
please retest with latest SVN trunk
On Thu, Aug 27, 2009 at 8:19 AM, Anatoliy Kounitskiy
anato...@kounitskiy.com wrote:
Just for information - the idea :
A---calls--- B ---att_xfer--- C, B hangs C up and goes back to A
( I`m sorry C is not answering :) )
--
Anthony Minessale II
/me points to the first question on the FAQ ;)
/b
On Aug 27, 2009, at 1:18 PM, Anatoliy Kounitskiy wrote:
Thank you all for the great job :)
Now it works as I wanted!!
Tomorrow I'll will try to update the wiki :)
___
FreeSWITCH-users mailing
Thank you all for the great job :)
Now it works as I wanted!!
Tomorrow I'll will try to update the wiki :)
But with few words ( I tried to strip the extensions to minimum for
more easy read for users).
In the dialplan I have created the extension showed below:
extension name=local_number
Thanks! I'll be in touch to help you if you need any wiki editing
assistance.
-MC
On Thu, Aug 27, 2009 at 11:18 AM, Anatoliy Kounitskiy
anato...@kounitskiy.com wrote:
Thank you all for the great job :)
Now it works as I wanted!!
Tomorrow I'll will try to update the wiki :)
But with few
Hello everybody!
I have few questions about the att_xfer application. First, what i want
to accomplish is: user A calls user B, after that user B makes attended
transfer to user C.
In the dialplan i have:
context name=vpbx
extension name=local_number
...
action application=bind_meta_app
Hello everybody!
I have few questions about the att_xfer application. First, what i want
to accomplish is: user A calls user B, after that user B makes attended
transfer to user C.
In the dialplan i have:
context name=vpbx
extension name=local_number
...
action application=bind_meta_app
After several hours of testing I was able to answer myself the
previous mentioned questions.
It appears that # and the 0 option work _only_ if user C has answered
the call OR voicemail system answers it.
user A ---call--- user Battended xfer--- user C
At this point I have new question. In
maybe we can make an origination_cancel_key=# you could set on the dial
string to be able to cancel that originate with dtmf
On Wed, Aug 26, 2009 at 1:27 PM, Anatoliy Kounitskiy
anato...@kounitskiy.com wrote:
After several hours of testing I was able to answer myself the
previous mentioned
i added a patch to attempt to do this so try adding
{origination_cancel_key=#} before the dial string
or
action application=set data=origination_cancel_key=#/
before you bridge.
On Wed, Aug 26, 2009 at 1:39 PM, Anthony Minessale
anthony.miness...@gmail.com wrote:
maybe we can make an
Thank you for the fast patch :)
I'm going to test it right away and report you if there are problems or not.
On Wed, Aug 26, 2009 at 10:59 PM, Anthony
Minessaleanthony.miness...@gmail.com wrote:
i added a patch to attempt to do this so try adding
{origination_cancel_key=#} before the dial
On Wed, Aug 26, 2009 at 12:59 PM, Anthony Minessale
anthony.miness...@gmail.com wrote:
i added a patch to attempt to do this so try adding
Nice work!
{origination_cancel_key=#} before the dial string
or
action application=set data=origination_cancel_key=#/
before you bridge.
Anatoliy,
...@lists.freeswitch.org] On Behalf Of Michael
Collins
Sent: Tuesday, May 26, 2009 5:57 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Questions on build 13441
Also, in general, do the XML files in config get updated during the 'make
install', or are they left as they were
Lars,
Please register and correct anything you see wrong on the wiki if
possible.
Thanks,
Brian
On May 27, 2009, at 10:16 AM, Lars Zeb wrote:
Also, on http://wiki.freeswitch.org/wiki/Mod_cdr_csv, near the
bottom of the page under ‘uuid’, the two hyperlinks (‘ref’) are
broken.
Brian
I'll get the docs section fixed this has changed and will require us
to fix it.
Thanks,
On May 27, 2009, at 10:16 AM, Lars Zeb wrote:
Also, on http://wiki.freeswitch.org/wiki/Mod_cdr_csv, near the
bottom of the page under ‘uuid’, the two hyperlinks (‘ref’) are
broken.
Brian West
On Wed, May 27, 2009 at 8:20 AM, Brian West br...@freeswitch.org wrote:
I'll get the docs section fixed this has changed and will require us to fix
it.
Thanks,
On May 27, 2009, at 10:16 AM, Lars Zeb wrote:
Also, on http://wiki.freeswitch.org/wiki/Mod_cdr_csv, near the bottom of
the page
-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Michael
Collins
Sent: Wednesday, May 27, 2009 10:05 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Questions on build 13441
On Wed, May 27, 2009 at 8:20 AM, Brian West
On Wed, May 27, 2009 at 11:28 AM, Lars Zeb larc...@yahoo.com wrote:
Michael, thanks for fixing the links.
And what about your advice on defining an extension that pertains all
internal extensions (1000-1019) which I have currently put in
conf/dialplan/default.xml? Is there an alternative
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Michael
Collins
Sent: Wednesday, May 27, 2009 11:56 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Questions on build 13441
On Wed, May 27
Order matters if something is loaded higher that matches which the
debug log shows you this if you press F8
/b
On May 27, 2009, at 5:56 PM, Lars Zeb wrote:
When I create an xml file in conf/dialplan/default, I assume that
it’s ‘inheriting’ its context, right?
If that’s so, do I use this
On Wed, May 27, 2009 at 3:56 PM, Lars Zeb larc...@yahoo.com wrote:
When I create an xml file in conf/dialplan/default, I assume that it’s
‘inheriting’ its context, right?
Correct. Files in conf/dialplan/default/*xml are included in the default
context while conf/dialplan/public/*xml are
I followed Michael Collin's instruction in an earlier email about building
pre8. During the ./bootstrap.h, I encountered the following error:
Entering directory /usr/src/freeswitch.trunk/libs/libsndfile
Creating aclocal.m4
Running libtoolize...
Putting files in AC_CONFIG_AUX_DIR, `Cfg'.
First off pre8 came prebootstrapped no need to run it. So please try
again.
/b
On May 26, 2009, at 7:03 PM, Lars Zeb wrote:
I followed Michael Collin’s instruction in an earlier email about
building pre8. During the ./bootstrap.h, I encountered the following
error:
Entering directory
Also, in general, do the XML files in config get updated during the ‘make
install’, or are they left as they were from the previous builds?
Running make install or make samples will not overwrite your existing
configuration files. NOTE: This means that when the default configuration
changes
...@lists.freeswitch.org] On Behalf Of Brian
West
Sent: Tuesday, May 26, 2009 5:18 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Questions on build 13441
First off pre8 came prebootstrapped no need to run it. So please try again.
/b
On May 26, 2009, at 7:03 PM
Hello,
I'm looking for the best codec/scenario for the last-mile and checked
speex codec capabilities (http://www.speex.org/comparison/nb_codecs.png).
This will be FS-FS interconnect (where one side uses portaudio, aka a
simple softphone).
As I see, it would be worth to use Speex in VBR mode
On Oct 14, 2008, at 9:17 AM, gary wrote:
1) Do I need to reload directory into FS after I added new users in
XML file? How? reloadxml?
correct
2) Can I use alias for user? I'd like to register the user with 10
digits DID and also assign 4 digits extension to the same user so
people
1) Do I need to reload directory into FS after I added new users in XML file?
How? reloadxml?
2) Can I use alias for user? I'd like to register the user with 10 digits DID
and also assign 4 digits extension to the same user so people can call each
other internally with 4 extensions. What is
34 matches
Mail list logo