[fusionpro] RE: Does output to multiple files work for everybody but me?
Hi Lisa, Yes, Bruce with Printable was very helpful. Note that choosing infinite stack does NOT appear to work. You have to set stack size and chunk size.(Hopefully in a future update). Bruce might chime in here with more specifics, but what he told me that was helpful is: As long as the stack size fits evenly in the chunk size you'll be ok. In your case, with your db example, you have a 3 up imposition scheme so if you set the stack size to be 100 and the chunk size at 300 you'll get 11 chunks with the last one containing 299 records. Or set the chunk size at 600 which gives 6 chunks with the last one containing 299 records. When the stack size will not fit evenly in a chunk, the composition engine chooses the stack size (data integrity) over chunk size. Hope that helps! -kim p.s. I ended up having some other issues pertaining to keeping things ordered for a presorted mailing list, but hopefully that won't be a concern for you. Did you ever get an answer to this issue? I'm working on a job where = I'm getting the exact same error you did and like you cannot figure out my problem! It's an 11 x 17 piece so it's a 1 up imposition and no matter = what I try I can't get multiple files.=20 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Calling all FP Web Users! Do you have a question or lots of knowledge to share about FusionPro Web? If so, join our Printable Web to Print Users' Forum today! Send email to [EMAIL PROTECTED] to find out how! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
[fusionpro] RE: Does output to multiple files work for everybody but me?
Kim Did you check that the number of records imposed on a sheet will fit evenly in a chunk? For example, if you are imposing 3 up on a sheet, then the number of records in a chunk needs to be a multiple of 3 like 333 for one hundred sheets. Bruce -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 13, 2007 12:02 PM To: FusionPro Users Forum Subject: [fusionpro] Does output to multiple files work for everybody but me? Could anyone tell me if they are able to use the output to multiple files option when composing on a Mac? I've tried different numbers, changed my imposition settings, stood on my head and hopped on one foot. No matter what I do, I get the following error: The number of records requested in a chunk is not compatible with the imposition setting. The number of records in a chunk has been adjusted. I'm running version 4.1 on a Mac and I'm outputting JLT (I have tried outputting to PDF too). Thanks for any help. -kim -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
[fusionpro] RE: Does output to multiple files work for everybody but me?
Hi Bruce, Yep, I have. It is a 3up. I've tried various mutliples of three and then I even tried some that weren't just to see what would happen. I've tried 1650, 1200, 550, 1653 (I've lost count actually of all the variations I tried). No matter what number I put in, I get the error message and one output file. Interestingly enough, I just tried a test where I didn't select any imposition file at all. I then get multiple output files (but of course I do need it to be 3up, so I need the imposition). So, I tried remaking an entirely new imposition file in case mine was corrupted somehow. But I still get the error. Very frustrating. And I think I've stumped support. :-( Thanks for the quick reply. Kim Did you check that the number of records imposed on a sheet will fit = evenly in a chunk? For example, if you are imposing 3 up on a sheet, = then the number of records in a chunk needs to be a multiple of 3 like = 333 for one hundred sheets. =20 Bruce Could anyone tell me if they are able to use the output to multiple files option when composing on a Mac? I've tried different numbers, changed my imposition settings, stood on = my head and hopped on one foot. No matter what I do, I get the following error: The number of records requested in a chunk is not compatible with the imposition setting. The number of records in a chunk has been adjusted. I'm running version 4.1 on a Mac and I'm outputting JLT (I have tried outputting to PDF too). Thanks for any help. -kim -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
[fusionpro] RE: Does output to multiple files work for everybody but me?
Kim, If you want, you can zip up some sample files and send them to me. I will test them out in our lab but probably can't get to it till tomorrow morning. Bruce -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 13, 2007 3:51 PM To: FusionPro Users Forum Subject: [fusionpro] RE: Does output to multiple files work for everybody but me? Hi Bruce, Yep, I have. It is a 3up. I've tried various mutliples of three and then I even tried some that weren't just to see what would happen. I've tried 1650, 1200, 550, 1653 (I've lost count actually of all the variations I tried). No matter what number I put in, I get the error message and one output file. Interestingly enough, I just tried a test where I didn't select any imposition file at all. I then get multiple output files (but of course I do need it to be 3up, so I need the imposition). So, I tried remaking an entirely new imposition file in case mine was corrupted somehow. But I still get the error. Very frustrating. And I think I've stumped support. :-( Thanks for the quick reply. Kim Did you check that the number of records imposed on a sheet will fit = evenly in a chunk? For example, if you are imposing 3 up on a sheet, = then the number of records in a chunk needs to be a multiple of 3 like = 333 for one hundred sheets. =20 Bruce Could anyone tell me if they are able to use the output to multiple files option when composing on a Mac? I've tried different numbers, changed my imposition settings, stood on = my head and hopped on one foot. No matter what I do, I get the following error: The number of records requested in a chunk is not compatible with the imposition setting. The number of records in a chunk has been adjusted. I'm running version 4.1 on a Mac and I'm outputting JLT (I have tried outputting to PDF too). Thanks for any help. -kim -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
