, May 23, 2006 09:34
To: FW-1-MAILINGLIST@AMADEUS.US.CHECKPOINT.COM
Subject: [FW-1] Installing SPLAT on Dell PowerEdge 2850 (UNCLASSIFIED)
Classification: UNCLASSIFIED
Caveats: NONE
Ive been attempting to install SPLAT on a Dell PowerEdge 2850 Server
that has dual 3.8ghz processors with 2mb L2
Classification: UNCLASSIFIED
Caveats: NONE
Ive been attempting to install SPLAT on a Dell PowerEdge 2850 Server that
has dual 3.8ghz processors with 2mb L2 Cache, 12gb RAM, Dual Embedded Intel
Gigabit1 82541 Server Adapter, PERC 4e/Di controller. It has six 15,000rpm
146gb hard drives that are
I had done the same install on R60 HFA3 on the same hardware but without
the additional harddisks you have. It went through fine. May be you
want to put only one HDD in its default configuration and try installing
again to see it that helps.
Ramki
CCNA, CCSE-NGAI
Dearing, Jimmy (EDS
Contractor)
[mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 23, 2006 9:34 AM
To: FW-1-MAILINGLIST@amadeus.us.checkpoint.com
Subject: [FW-1] Installing SPLAT on Dell PowerEdge 2850 (UNCLASSIFIED)
Classification: UNCLASSIFIED
Caveats: NONE
Ive been attempting to install SPLAT on a Dell PowerEdge 2850
] Installing SPLAT on Dell PowerEdge 2850 (UNCLASSIFIED)
I had done the same install on R60 HFA3 on the same hardware but without
the additional harddisks you have. It went through fine. May be you
want to put only one HDD in its default configuration and try installing
again to see it that helps
I ahve the same exact server, I had to use the NGX install to install on
that server.
we were upgrading anyways so it was not a big deal.
=
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the
