Re: Thermal Compound Question

2010-11-05 Thread Vic


On Nov 3, 10:16 pm, Tina K. penguir...@gmail.com wrote:
 On 2010/11/03 12:39, John Carmonne so eloquently wrote:



  I have noticed that Apple used a thick paste on the G4 PowerBooks, I
  assume this is because the possible flexing and ambient temperature
  changes of the components could break the thermal contact

 That might not be the case, I do remember some Apple model being
 manufactured with too much thermal paste by mistake, but I don't
 remember which model it was.

 Tina
The original MacBook Pro (1.83 MHz) had issues with big globs of
thermal paste.  I have one that I purchased as a high mileage
special, and replaced the lower case due to the plastic frame being
broken.  I had noticed a lot more fan activity than with the later
version (2.2 MHz).  I cleaned it up and re-applied Arctic Silver in a
moderate amount.  The result is that it runs a full 40 degrees (F)
cooler.  I vote for less.
V Mabus

-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Blueberry iMac

2010-11-05 Thread Dennis Myhand
I have just locked on to a Blueberry iMac with Blueberry keyboard and
Blueberry puck mouse.  How difficult is it to upgrade these?  It looks like
a sealed unit.  Do I need special tools?  Thanks, Dennis

Dennis Myhand
Technology Coordinator 
Edna ISD 
(361)782-9086 
Fax (361)781-1002 
Cell (361)235-1944




-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Re: Blueberry iMac

2010-11-05 Thread Ralph Green
Howdy,
  I'll start with the mouse.  It can be upgraded to a LED mouse, but it
is a pretty fair amount of work.  The easiest route is to find a small
LED sensor mouse and transplant the guts into the puck mouse.  You will
need an exacto knife and some putty.  I would not call those special
tools, but I suppose that depends on what you are used to using.
Good luck,
Ralph

On Fri, 2010-11-05 at 15:05 -0500, Dennis Myhand wrote:
 I have just locked on to a Blueberry iMac with Blueberry keyboard and
 Blueberry puck mouse.  How difficult is it to upgrade these?  It looks like
 a sealed unit.  Do I need special tools?  Thanks, Dennis
 
 Dennis Myhand



-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Re: Blueberry iMac

2010-11-05 Thread Dennis Myhand
Uh...I am 53 years old and still have most of all ten fingers (some 
shorter than others, your finger mileage may vary) and I have not 
intention of doing anything to a mouse with an x-acto knife!  I will use 
a M$ Intelli-mouse or something like that and keep the puck for looks. 
I mean, how hard is it to upgrade the processor, memory, and hard drive? 
 I want to make it go faster, not work on a mouse!  How do I find out 
which revision it is?  It is a tray loading model, not slot loading. and 
it is running 8.6



Ralph Green wrote:

Howdy,
  I'll start with the mouse.  It can be upgraded to a LED mouse, but it
is a pretty fair amount of work.  The easiest route is to find a small
LED sensor mouse and transplant the guts into the puck mouse.  You will
need an exacto knife and some putty.  I would not call those special
tools, but I suppose that depends on what you are used to using.
Good luck,
Ralph

On Fri, 2010-11-05 at 15:05 -0500, Dennis Myhand wrote:

I have just locked on to a Blueberry iMac with Blueberry keyboard and
Blueberry puck mouse.  How difficult is it to upgrade these?  It looks like
a sealed unit.  Do I need special tools?  Thanks, Dennis

Dennis Myhand






--
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Re: Blueberry iMac

2010-11-05 Thread Bruce Johnson

On Nov 5, 2010, at 1:05 PM, Dennis Myhand wrote:

 I have just locked on to a Blueberry iMac with Blueberry keyboard and
 Blueberry puck mouse.  How difficult is it to upgrade these?  It looks like
 a sealed unit.  Do I need special tools?  Thanks, Dennis

There's a tray you can pull out that lets you access the RAM for upgrading; 
Hard drives takel a little more work, but it doesn't require any special tools.


http://www.macworld.com/article/2496/2001/10/howtoimac.html

-- 
Bruce Johnson

Wherever you go, there you are B. Banzai,  PhD

-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Do something useful with those old ADC monitors laying about

2010-11-05 Thread Bruce Johnson
A how-to making them work with DVI:

http://hackaday.com/2010/11/04/apple-studio-display-connector-ports/


-- 
Bruce Johnson

Wherever you go, there you are B. Banzai,  PhD

-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list


Re: Do something useful with those old ADC monitors laying about

2010-11-05 Thread Bruce Johnson

On Nov 5, 2010, at 9:41 PM, Wallace Adrian D'Alessio wrote:

 This looks all well and good. However is anyone else as puzzled as I by the
 lack of a simple schematic, to show the proper wire positions to those of us
 not as familiar with the  way these things are hooked up ?
 
 

Well,  it's Hack-a-Day, and it's kind of assumed that you have the hacker ethos 
of 'if you don't know how it works, poke at it until it does work...or blows 
up.  And if you read the original thread, he does say he'll try to cobble 
together a schematic, so check back in a bit.

The link they show also has a link to an earlier entry for doing this, where 
the cabling is explicated:

http://doesntexistat.blogspot.com/2010/11/hacking-apple-studio-display.html

And the always useful Pinouts.RU http://pinouts.ru/ Has TONS of connector and 
other such very useful info.

Such as :

ADC pinout: http://pinouts.ru/Video/apple_adc_pinout.shtml
DVI pinout: http://pinouts.ru/Video/dvi_pinout.shtml

etc.

You trace the existing cables to their connectors inside the system, and the 
power, USB and video are pretty easy to figure out, at that point.

Hacking requires elbow AND brain grease on your part...

-- 
Bruce Johnson

Wherever you go, there you are B. Banzai,  PhD

-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list