Unplug the machine and remove the pram battery for 15 min and try
again...check the DVD CDroom jumpers for Slave or master and also is your
NEw memory is compatible with Apple if the FANS are spinning faster and you
see a red led light be side the power botton location...something is set up
On Jan 15, 2011, at 6:01 AM, Miguel Garcia Gell wrote:
On Fri, Jan 14, 2011 at 1:35 PM, Richard Smallwood sma...@knology.net wrote:
Thank you, John.
It was a problem with the RAM memory. Pairs are NOT installed beside each
other, there is a numbering sequence which was not obvious.
Oh
Thank you, John.
It was a problem with the RAM memory. Pairs are NOT installed beside
each other, there is a numbering sequence which was not obvious.
Oh well, live and learn.
Richard
On 13 Jan 2011, at 7:29 PM, John Carmonne wrote:
On Jan 13, 2011, at 5:22 PM, Richard Smallwood wrote:
I
I was upgrading the DVD-CD ROM Drive, adding a 2nd Hard Drive and
increasing the RAM memory on this brought used Dual 1.8 Ghz. When I
got everything installed and tried to start it , the fans started,
but nothing else did. There is a white LED above the power switch
which flashed until I
On Jan 13, 2011, at 5:22 PM, Richard Smallwood wrote:
I was upgrading the DVD-CD ROM Drive, adding a 2nd Hard Drive and increasing
the RAM memory on this brought used Dual 1.8 Ghz. When I got everything
installed and tried to start it , the fans started, but nothing else did.
There is a
