Re: SCSI issue has arisen

2013-01-17 Thread t...@prismnet.com
On Jan 16, 12:28 pm, Len Gerstel lgers...@gmail.com wrote: On Jan 15, 2013, at 7:34 PM, t...@prismnet.com wrote: Do you remember where you got them?  Part number?   I would dearly like to get some $5 SCA=50 pin adapters with termination.   There are a bunch of 2.5 SCSI drives available

Re: SCSI issue has arisen

2013-01-17 Thread Dana Collins
Hi Len, Thank you - I did track one down for a reasonable price. Not from Hong kong, but close enough - New Jersey :-) At any rate we'll see if the ATTO Express U2 card I picked up does the trick. Thanks again, Dana On Wed, Jan 16, 2013 at 1:28 PM, Len Gerstel lgers...@gmail.com wrote: On Jan

Re: SCSI issue has arisen

2013-01-16 Thread t...@prismnet.com
On Jan 15, 12:13 pm, Len Gerstel lgers...@gmail.com wrote: On Jan 15, 2013, at 12:53 PM, t...@prismnet.com wrote: On Jan 13, 4:41 pm, Len Gerstel lgers...@gmail.com wrote: Beiges have onboard 50 pin SCSI. Just get one of the SCA to 50 pin adapters and plug into the fully

Re: SCSI issue has arisen

2013-01-15 Thread t...@prismnet.com
On Jan 13, 4:41 pm, Len Gerstel lgers...@gmail.com wrote: Beiges have onboard 50 pin SCSI. Just get one of the SCA to 50 pin adapters and plug into the fully supported onboard scsi on the beige. These adapters are available on ebay for under $5 shipped. I am sure you can easily beat this

Re: SCSI issue has arisen

2013-01-15 Thread Len Gerstel
On Jan 15, 2013, at 12:53 PM, t...@prismnet.com wrote: On Jan 13, 4:41 pm, Len Gerstel lgers...@gmail.com wrote: Beiges have onboard 50 pin SCSI. Just get one of the SCA to 50 pin adapters and plug into the fully supported onboard scsi on the beige. These adapters are available on ebay

Re: SCSI issue has arisen

2013-01-15 Thread Bill Connelly
On Jan 14, 2013, at 9:12 AM, Bill Connelly wrote: RE: ATTO Configuration Tool:I was trying to remember something about the flashing of an older ATTO SCSI PCI card ... I believe if it is flashed for Tiger, you lose the OS 9 capability. Haven't had time to figure out why I cannot get

Re: SCSI issue has arisen

2013-01-15 Thread Bruce Johnson
On Jan 15, 2013, at 11:13 AM, Len Gerstel lgers...@gmail.com wrote: SCSI voodoo doesn't happen because it fails to work when people configure SCSI properly. SCSI voodoo happens because SCSI often still works even when it is misconfigured, and then when it stops working, folks act puzzled

Re: SCSI issue has arisen

2013-01-15 Thread glen
On Jan 14, 2013, at 9:12 AM, Bill Connelly wrote: RE:  ATTO Configuration Tool:    I was trying to remember something about the flashing of an older ATTO SCSI PCI  card ... I believe if it is flashed for Tiger, you lose the OS 9 capability. It likely depends on the ATTO card you have. I

Re: SCSI issue has arisen

2013-01-14 Thread Bill Connelly
On Jan 14, 2013, at 12:18 AM, DLC wrote: Thank you, gentlemen, for responding. You're info is helping my memory. Len, I followed yor lead and found a good 80-68-50 SCA adapter on eBay for under $4 shipped, so hurrah! Thank you. Bill, I believe our card at school was indeed an Atto - the

SCSI issue has arisen

2013-01-13 Thread DLC
Greetings all, I need some help remembering - a trip down memory lane. I find myself in an unplanned need to access six IBM SCSI-Ultra 320 drives (with SCA interface, so I know an adapter from 68-pin cable to SCA is most likely involved). I seem to recall that I had such a card from either Adaptec

Re: SCSI issue has arisen

2013-01-13 Thread W.Adrian D'Alessio
Try Trishes Hardware Hell? On Sun, Jan 13, 2013 at 4:56 PM, DLC dlcatft...@gmail.com wrote: Greetings all, I need some help remembering - a trip down memory lane. I find myself in an unplanned need to access six IBM SCSI-Ultra 320 drives (with SCA interface, so I know an adapter from 68-pin

Re: SCSI issue has arisen

2013-01-13 Thread Len Gerstel
On Jan 13, 2013, at 4:56 PM, DLC wrote: Greetings all, I need some help remembering - a trip down memory lane. I find myself in an unplanned need to access six IBM SCSI-Ultra 320 drives (with SCA interface, so I know an adapter from 68-pin cable to SCA is most likely involved). I seem to

Re: SCSI issue has arisen

2013-01-13 Thread Bill Connelly
On Jan 13, 2013, at 4:56 PM, DLC wrote: Many thanks for any thoughts, Regards, Dana I believe I have this one in my Yikes! running Tiger IIRC: ATTO ExpressPCI PSC SCSI Controller Card Features: Model # 0042-PCBX-002 Working Pull from a Power Mac G3 External 68-pin Ultra Wide SCSI

Re: SCSI issue has arisen

2013-01-13 Thread DLC
Thank you, gentlemen, for responding. You're info is helping my memory. Len, I followed yor lead and found a good 80-68-50 SCA adapter on eBay for under $4 shipped, so hurrah! Thank you. Bill, I believe our card at school was indeed an Atto - the only one Digidesign approved for ProTools at

Re: SCSI issue has arisen

2013-01-13 Thread DLC
Hi Bill, I just snagged this very card for a good price from eBay, Apple ROMMed - I cannot remember if I need a driver/extension for this or not. Do you know? ( plan on using OS 9.2.2 unless otherwise determined). Thanks, Dana On Sunday, January 13, 2013 6:55:10 PM UTC-5, billycarmacs wrote: