Re: [g4u-help] broken pipe error g4u 2.4alpha2

2008-02-19 Thread adavison
I usually get that message if I'm trying to write an Image to a disk
that is too small for it.

Does the process go on for a while before you get the message?

Alex Davison
 
Senior ICT Technician
Copleston High School
T: 01473 - 277240
F: 01473 - 277256
 
Web: www.copleston.suffolk.sch.uk
 
 
 
CONFIDENTIALITY AND DISCLAIMER NOTICE
 
This message is confidential. You should not copy it or disclose its
contents to anyone. You may use and apply the information for the
intended purpose only. If you are not the intended recipient, please
contact the sender by reply email and destroy all copies of the original
message. Any views or opinions presented are those of the author only
and not necessarily those of Copleston High School unless otherwise
specifically stated. As internet communications are not secure Copleston
High School does not accept legal responsibility for the contents of
this message nor responsibility for any change made to this message
after it was sent by the original sender. This message has been scanned
by Sophos antivirus software.
 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ed Liddle
Sent: 18 February 2008 21:13
To: g4u-help@feyrer.de
Subject: [g4u-help] broken pipe error g4u 2.4alpha2

I created a disk image from a SATA hard drive connected via a usb
adaptor (sd0). When I go to write the image to an internal sata drive,
slurpdisk serverip image_name wd0, I get the following error:
Progress: writing 47448 bytes to output pipe: Broken pipe
gzip:error writing to output: Broken pipe
ftp:Writing '| progress -z dd obs=lm of = /dev/rwd0d:Broken pipe
462 Failure writing network stream. 

Has anyone ran into this error before? 
The PC I am using is a Dell Optiplex 755 with an intel NH828011O chipset
in it. If you need anymore hardware info let me know. 

Thanks, 
-Ed Liddle



-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
g4u-help mailing list
g4u-help@feyrer.de
https://lists.sourceforge.net/lists/listinfo/g4u-help

-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
g4u-help mailing list
g4u-help@feyrer.de
https://lists.sourceforge.net/lists/listinfo/g4u-help


[g4u-help] broken pipe error g4u 2.4alpha2

2008-02-18 Thread Ed Liddle
I created a disk image from a SATA hard drive connected via a usb
adaptor (sd0). When I go to write the image to an internal sata drive,
slurpdisk serverip image_name wd0, I get the following error:
Progress: writing 47448 bytes to output pipe: Broken pipe
gzip:error writing to output: Broken pipe
ftp:Writing '| progress -z dd obs=lm of = /dev/rwd0d:Broken pipe
462 Failure writing network stream. 

Has anyone ran into this error before? 
The PC I am using is a Dell Optiplex 755 with an intel NH828011O chipset
in it. If you need anymore hardware info let me know. 

Thanks, 
-Ed Liddle


-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
g4u-help mailing list
g4u-help@feyrer.de
https://lists.sourceforge.net/lists/listinfo/g4u-help