Re: [galaxy-dev] Batch limit on Wokflows

2012-05-29 Thread Anthonius deBoer
  for f in files:if '_R1.fastq' in f:  f2 = f.replace('_R1.fastq','_R2.fastq')  data['ds_map'][get_workflow_step(myKey, galaxyURL, workflow_id, 'FASTQ Input (#1)')] = {'src':'ldda', 'id':files[f] }  data['ds_map'][get_workflow_step(myKey, galaxyURL, workflow_id, 'FASTQ Input (#2)')] = {'src':'ldda', 'id':files[f2] }   #History will be using PREFIX-FILENAME format  data['history'] = "%s%s" % ( historyPrefix,f.split('/')[-1] )  print '---'  print "Preparing workflow for :\n%s\n" % f  if options.test:print data  else:url = "" % galaxyURLsubmit( myKey, url, data )if __name__ == '__main__':  main()/codeOn May 25, 2012, at 06:15 AM, Geert Vandeweyer geert.vandewey...@ua.ac.be wrote:I'm looking for a workflow of :  Forward reads.fastq =  QC = map = etc Reverse reads.fastq =  and would like to specify pairs of files (from MiSeq) in the batch  workflow interface. I'm currently looking into interlacing the files  outside of galaxy before uploading. Then I can de-interlace as the first  step, but this is redundant, as we get seperate files to start.  Best regards,  Geert   On 05/25/2012 02:12 PM, Dannon Baker wrote:  Batch mode is currently only allowed for a single input dataset step, so the others are intentionally disabled upon toggling the first one on. We do, however, plan to eventually expand this to allow for pairwise/etc input sets. Out of curiosity, which behavior is it that you're looking for?   -Dannon   On May 25, 2012, at 8:03 AM, Geert Vandeweyer wrote:   Is it possible to use multiple 'input dataset' steps in a single workflow in batch? If I have two, I can only select batch input on one of them. If one is open, the other toggle button does not respond.   Thanks,   Geert   On 02/14/2012 09:55 PM, Petit III, Robert A. wrote:  Thats it! Consider this resolved, and total operator error. I tried using the 'Input Dataset' step, and am no longer having issues.   Thanks for the help Dannon.   ____________  From: Petit III, Robert A.  Sent: Tuesday, February 14, 2012 3:49 PM  To: galaxy-dev@lists.bx.psu.edu  Subject: RE: [galaxy-dev] Batch limit on Wokflows   Workflow is beginning directly with a tool.   An example test workflow I've been trying is, I have 20 fasta files, and the workflow has only the FASTA-to-Tabular tool.   Thanks,  Robert    From: Dannon Baker [dannonba...@me.com]  Sent: Tuesday, February 14, 2012 3:33 PM  To: Petit III, Robert A.  Cc: galaxy-dev@lists.bx.psu.edu  Subject: Re: [galaxy-dev] Batch limit on Wokflows   I hadn't had a chance to follow up again yet, but in your workflow, are you using an Input Dataset step, or do you have the workflow beginning directly with a tool?   -Dannon   On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:   Here's the latest. I have tested this on Chrome, Firefox, and IE.   I've tried the latest revisions of galaxy-central (71031bf3105c) and galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go to localhost:8080). I am still running into same issue. All is well with 19 or less datasets in the history, but as soon as I add a 20th I can no longer run a workflow on multiple datasets.   Are there any known issues running galaxy on Ubuntu 10.04?      This e-mail message (including any attachments) is for the sole use of  the intended recipient(s) and may contain confidential and privileged  information. If the reader of this message is not the intended  recipient, you are hereby notified that any dissemination, distribution  or copying of this message (including any attachments) is strictly  prohibited.   If you have received this message in error, please contact  the sender by reply e-mail message and destroy all copies of the  original message (including attachments).   ___  Please keep all replies on the list by using "reply all"  in your mail client. To manage your subscriptions to this  and other Galaxy lists, please use the interface at:   http://lists.bx.psu.edu/  ___  Please keep all replies on the list by using "reply all"  in your mail client. To manage your subscriptions to this  and other Galaxy lists, please use the interface at:   http://lists.bx.psu.edu/   --Geert Vandeweyer, Ph.D.  Department of Medical Genetics  University of Antwerp  Prins Boudewijnlaan 43  2650 Edegem  Belgium  Tel: +32 (0)3 275 97 56  E-mail: geert.vandewe...@ua.ac.be  http://ua.ac.be/cognitivegenetics  http://www.linkedin.com/pub/geert-vandeweyer/26/457/726   ___  Please keep all replies on the list by using "reply all"  in your mail client. To manage your subscr

Re: [galaxy-dev] Batch limit on Wokflows

2012-05-25 Thread Geert Vandeweyer
Is it possible to use multiple 'input dataset' steps in a single 
workflow in batch? If I have two, I can only select batch input on one 
of them. If one is open, the other toggle button does not respond.


Thanks,

Geert

On 02/14/2012 09:55 PM, Petit III, Robert A. wrote:

Thats it!  Consider this resolved, and total operator error.  I tried using the 
'Input Dataset' step, and am no longer having issues.

Thanks for the help Dannon.


From: Petit III, Robert A.
Sent: Tuesday, February 14, 2012 3:49 PM
To: galaxy-dev@lists.bx.psu.edu
Subject: RE: [galaxy-dev] Batch limit on Wokflows

Workflow is beginning directly with a tool.

An example test workflow I've been trying is, I have 20 fasta files, and the 
workflow has only the FASTA-to-Tabular tool.

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Tuesday, February 14, 2012 3:33 PM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

I hadn't had a chance to follow up again yet, but in your workflow, are you 
using an Input Dataset step, or do you have the workflow beginning directly 
with a tool?

-Dannon

On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:


Here's the latest.  I have tested this on Chrome, Firefox, and IE.

I've tried the latest revisions of galaxy-central (71031bf3105c) and 
galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go to 
localhost:8080).  I am still running into same issue.  All is well with 19 or 
less datasets in the history, but as soon as I add a 20th I can no longer run a 
workflow on multiple datasets.

Are there any known issues running galaxy on Ubuntu 10.04?



This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

   http://lists.bx.psu.edu/



--

Geert Vandeweyer, Ph.D.
Department of Medical Genetics
University of Antwerp
Prins Boudewijnlaan 43
2650 Edegem
Belgium
Tel: +32 (0)3 275 97 56
E-mail: geert.vandewe...@ua.ac.be
http://ua.ac.be/cognitivegenetics
http://www.linkedin.com/pub/geert-vandeweyer/26/457/726

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

 http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-05-25 Thread Dannon Baker
Batch mode is currently only allowed for a single input dataset step, so the 
others are intentionally disabled upon toggling the first one on.  We do, 
however, plan to eventually expand this to allow for pairwise/etc input sets.  
Out of curiosity, which behavior is it that you're looking for?

-Dannon

On May 25, 2012, at 8:03 AM, Geert Vandeweyer wrote:

 Is it possible to use multiple 'input dataset' steps in a single workflow in 
 batch? If I have two, I can only select batch input on one of them. If one is 
 open, the other toggle button does not respond.
 
 Thanks,
 
 Geert
 
 On 02/14/2012 09:55 PM, Petit III, Robert A. wrote:
 Thats it!  Consider this resolved, and total operator error.  I tried using 
 the 'Input Dataset' step, and am no longer having issues.
 
 Thanks for the help Dannon.
 
 
 From: Petit III, Robert A.
 Sent: Tuesday, February 14, 2012 3:49 PM
 To: galaxy-dev@lists.bx.psu.edu
 Subject: RE: [galaxy-dev] Batch limit on Wokflows
 
 Workflow is beginning directly with a tool.
 
 An example test workflow I've been trying is, I have 20 fasta files, and the 
 workflow has only the FASTA-to-Tabular tool.
 
 Thanks,
 Robert
 
 From: Dannon Baker [dannonba...@me.com]
 Sent: Tuesday, February 14, 2012 3:33 PM
 To: Petit III, Robert A.
 Cc: galaxy-dev@lists.bx.psu.edu
 Subject: Re: [galaxy-dev] Batch limit on Wokflows
 
 I hadn't had a chance to follow up again yet, but in your workflow, are you 
 using an Input Dataset step, or do you have the workflow beginning directly 
 with a tool?
 
 -Dannon
 
 On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:
 
 Here's the latest.  I have tested this on Chrome, Firefox, and IE.
 
 I've tried the latest revisions of galaxy-central (71031bf3105c) and 
 galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go 
 to localhost:8080).  I am still running into same issue.  All is well with 
 19 or less datasets in the history, but as soon as I add a 20th I can no 
 longer run a workflow on multiple datasets.
 
 Are there any known issues running galaxy on Ubuntu 10.04?
 
 
 
 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.
 
 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).
 
 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:
 
  http://lists.bx.psu.edu/
 
 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:
 
   http://lists.bx.psu.edu/
 
 
 -- 
 
 Geert Vandeweyer, Ph.D.
 Department of Medical Genetics
 University of Antwerp
 Prins Boudewijnlaan 43
 2650 Edegem
 Belgium
 Tel: +32 (0)3 275 97 56
 E-mail: geert.vandewe...@ua.ac.be
 http://ua.ac.be/cognitivegenetics
 http://www.linkedin.com/pub/geert-vandeweyer/26/457/726
 
 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:
 
 http://lists.bx.psu.edu/

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-05-25 Thread Geert Vandeweyer

I'm looking for a workflow of :

Forward reads.fastq =
 QC = map = etc
Reverse reads.fastq =

and would like to specify pairs of files (from MiSeq) in the batch 
workflow interface. I'm currently looking into interlacing the files 
outside of galaxy before uploading. Then I can de-interlace as the first 
step, but this is redundant, as we get seperate files to start.


Best regards,

Geert


On 05/25/2012 02:12 PM, Dannon Baker wrote:

Batch mode is currently only allowed for a single input dataset step, so the 
others are intentionally disabled upon toggling the first one on.  We do, 
however, plan to eventually expand this to allow for pairwise/etc input sets.  
Out of curiosity, which behavior is it that you're looking for?

-Dannon

On May 25, 2012, at 8:03 AM, Geert Vandeweyer wrote:


Is it possible to use multiple 'input dataset' steps in a single workflow in 
batch? If I have two, I can only select batch input on one of them. If one is 
open, the other toggle button does not respond.

Thanks,

Geert

On 02/14/2012 09:55 PM, Petit III, Robert A. wrote:

Thats it!  Consider this resolved, and total operator error.  I tried using the 
'Input Dataset' step, and am no longer having issues.

Thanks for the help Dannon.


From: Petit III, Robert A.
Sent: Tuesday, February 14, 2012 3:49 PM
To: galaxy-dev@lists.bx.psu.edu
Subject: RE: [galaxy-dev] Batch limit on Wokflows

Workflow is beginning directly with a tool.

An example test workflow I've been trying is, I have 20 fasta files, and the 
workflow has only the FASTA-to-Tabular tool.

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Tuesday, February 14, 2012 3:33 PM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

I hadn't had a chance to follow up again yet, but in your workflow, are you 
using an Input Dataset step, or do you have the workflow beginning directly 
with a tool?

-Dannon

On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:


Here's the latest.  I have tested this on Chrome, Firefox, and IE.

I've tried the latest revisions of galaxy-central (71031bf3105c) and 
galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go to 
localhost:8080).  I am still running into same issue.  All is well with 19 or 
less datasets in the history, but as soon as I add a 20th I can no longer run a 
workflow on multiple datasets.

Are there any known issues running galaxy on Ubuntu 10.04?



This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

   http://lists.bx.psu.edu/


--

Geert Vandeweyer, Ph.D.
Department of Medical Genetics
University of Antwerp
Prins Boudewijnlaan 43
2650 Edegem
Belgium
Tel: +32 (0)3 275 97 56
E-mail: geert.vandewe...@ua.ac.be
http://ua.ac.be/cognitivegenetics
http://www.linkedin.com/pub/geert-vandeweyer/26/457/726

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

http://lists.bx.psu.edu/



--

Geert Vandeweyer, Ph.D.
Department of Medical Genetics
University of Antwerp
Prins Boudewijnlaan 43
2650 Edegem
Belgium
Tel: +32 (0)3 275 97 56
E-mail: geert.vandewe...@ua.ac.be
http://ua.ac.be/cognitivegenetics
http://www.linkedin.com/pub/geert-vandeweyer/26/457/726

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

 http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-14 Thread Petit III, Robert A.
Here's the latest.  I have tested this on Chrome, Firefox, and IE.

I've tried the latest revisions of galaxy-central (71031bf3105c) and 
galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go to 
localhost:8080).  I am still running into same issue.  All is well with 19 or 
less datasets in the history, but as soon as I add a 20th I can no longer run a 
workflow on multiple datasets.

Are there any known issues running galaxy on Ubuntu 10.04?



This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-14 Thread Dannon Baker
I hadn't had a chance to follow up again yet, but in your workflow, are you 
using an Input Dataset step, or do you have the workflow beginning directly 
with a tool?

-Dannon

On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:

 Here's the latest.  I have tested this on Chrome, Firefox, and IE.
 
 I've tried the latest revisions of galaxy-central (71031bf3105c) and 
 galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go 
 to localhost:8080).  I am still running into same issue.  All is well with 19 
 or less datasets in the history, but as soon as I add a 20th I can no longer 
 run a workflow on multiple datasets.
 
 Are there any known issues running galaxy on Ubuntu 10.04?
 
 
 
 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.
 
 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).
 
 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:
 
  http://lists.bx.psu.edu/

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-14 Thread Petit III, Robert A.
Workflow is beginning directly with a tool.

An example test workflow I've been trying is, I have 20 fasta files, and the 
workflow has only the FASTA-to-Tabular tool.

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Tuesday, February 14, 2012 3:33 PM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

I hadn't had a chance to follow up again yet, but in your workflow, are you 
using an Input Dataset step, or do you have the workflow beginning directly 
with a tool?

-Dannon

On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:

 Here's the latest.  I have tested this on Chrome, Firefox, and IE.

 I've tried the latest revisions of galaxy-central (71031bf3105c) and 
 galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go 
 to localhost:8080).  I am still running into same issue.  All is well with 19 
 or less datasets in the history, but as soon as I add a 20th I can no longer 
 run a workflow on multiple datasets.

 Are there any known issues running galaxy on Ubuntu 10.04?

 

 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.

 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).

 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-14 Thread Petit III, Robert A.
Thats it!  Consider this resolved, and total operator error.  I tried using the 
'Input Dataset' step, and am no longer having issues.  

Thanks for the help Dannon.


From: Petit III, Robert A.
Sent: Tuesday, February 14, 2012 3:49 PM
To: galaxy-dev@lists.bx.psu.edu
Subject: RE: [galaxy-dev] Batch limit on Wokflows

Workflow is beginning directly with a tool.

An example test workflow I've been trying is, I have 20 fasta files, and the 
workflow has only the FASTA-to-Tabular tool.

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Tuesday, February 14, 2012 3:33 PM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

I hadn't had a chance to follow up again yet, but in your workflow, are you 
using an Input Dataset step, or do you have the workflow beginning directly 
with a tool?

-Dannon

On Feb 14, 2012, at 3:26 PM, Petit III, Robert A. wrote:

 Here's the latest.  I have tested this on Chrome, Firefox, and IE.

 I've tried the latest revisions of galaxy-central (71031bf3105c) and 
 galaxy-dist (26920e20157f) straight out of the box (hg clone, sh run.sh, go 
 to localhost:8080).  I am still running into same issue.  All is well with 19 
 or less datasets in the history, but as soon as I add a 20th I can no longer 
 run a workflow on multiple datasets.

 Are there any known issues running galaxy on Ubuntu 10.04?

 

 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.

 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).

 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-13 Thread Petit III, Robert A.
Sorry for the delay, but I am using a galaxy-dist clone, and have updated to 
revision 26920e20157f+ tip.  I'm still receiving the same issue with the 
revision.  Maybe I should try out galaxy-central?

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Friday, February 10, 2012 11:50 AM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

What revision is your Galaxy instance at?  I'm not seeing this behavior on tip 
with a simple test, it may have been something we've fixed in a more recent 
revision.

-Dannon

On Feb 10, 2012, at 11:14 AM, Petit III, Robert A. wrote:

 Hi there,

 I've run into an issue on my local galaxy install. When I have 20 or more 
 datasets in my history, I no longer get the option to 'Enable/Disable 
 selection of multiple input files...' I instead get a broken drop down list.  
 I say broken because its as though the drop down list and input box have 
 merged together.

 Is there a setting I need to change to correct this?

 Thanks
 Robert

 

 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.

 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).

 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-13 Thread Petit III, Robert A.
OK, I've tried the latest revision og 'Galaxy-Central' and am still running 
into the same issue, when I try to run a work flow when there are 20+ datasets 
in my history.

I might try setting it up on another machine to see if I run into the same 
issue.

Thanks,
Robert


From: Petit III, Robert A.
Sent: Monday, February 13, 2012 11:05 AM
To: galaxy-dev@lists.bx.psu.edu
Subject: RE: [galaxy-dev] Batch limit on Wokflows

Sorry for the delay, but I am using a galaxy-dist clone, and have updated to 
revision 26920e20157f+ tip.  I'm still receiving the same issue with the 
revision.  Maybe I should try out galaxy-central?

Thanks,
Robert

From: Dannon Baker [dannonba...@me.com]
Sent: Friday, February 10, 2012 11:50 AM
To: Petit III, Robert A.
Cc: galaxy-dev@lists.bx.psu.edu
Subject: Re: [galaxy-dev] Batch limit on Wokflows

What revision is your Galaxy instance at?  I'm not seeing this behavior on tip 
with a simple test, it may have been something we've fixed in a more recent 
revision.

-Dannon

On Feb 10, 2012, at 11:14 AM, Petit III, Robert A. wrote:

 Hi there,

 I've run into an issue on my local galaxy install. When I have 20 or more 
 datasets in my history, I no longer get the option to 'Enable/Disable 
 selection of multiple input files...' I instead get a broken drop down list.  
 I say broken because its as though the drop down list and input box have 
 merged together.

 Is there a setting I need to change to correct this?

 Thanks
 Robert

 

 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.

 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).

 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/


Re: [galaxy-dev] Batch limit on Wokflows

2012-02-10 Thread Dannon Baker
What revision is your Galaxy instance at?  I'm not seeing this behavior on tip 
with a simple test, it may have been something we've fixed in a more recent 
revision.

-Dannon

On Feb 10, 2012, at 11:14 AM, Petit III, Robert A. wrote:

 Hi there,
 
 I've run into an issue on my local galaxy install. When I have 20 or more 
 datasets in my history, I no longer get the option to 'Enable/Disable 
 selection of multiple input files...' I instead get a broken drop down list.  
 I say broken because its as though the drop down list and input box have 
 merged together.
 
 Is there a setting I need to change to correct this?
 
 Thanks
 Robert
 
 
 
 This e-mail message (including any attachments) is for the sole use of
 the intended recipient(s) and may contain confidential and privileged
 information. If the reader of this message is not the intended
 recipient, you are hereby notified that any dissemination, distribution
 or copying of this message (including any attachments) is strictly
 prohibited.
 
 If you have received this message in error, please contact
 the sender by reply e-mail message and destroy all copies of the
 original message (including attachments).
 
 ___
 Please keep all replies on the list by using reply all
 in your mail client.  To manage your subscriptions to this
 and other Galaxy lists, please use the interface at:
 
  http://lists.bx.psu.edu/

___
Please keep all replies on the list by using reply all
in your mail client.  To manage your subscriptions to this
and other Galaxy lists, please use the interface at:

  http://lists.bx.psu.edu/