11.58
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] (no subject)
Dear Developers,
I am reaching out to seek advice or potential solutions regarding the creation
of .aux.xml files for GeoTIFF Or GOG using GDAL. I have attempted using the
following commands, like so:
os.environ
Dear Developers,
I am reaching out to seek advice or potential solutions regarding the
creation of .aux.xml files for GeoTIFF Or GOG using GDAL. I have attempted
using the following commands, like so:
os.environ['GDAL_PAM_ENABLED'] = 'YES'
os.environ['GDAL_GEOREF_SOURCES'] =
Hi,
addressed per https://github.com/OSGeo/gdal/pull/6407
Even
Le 19/09/2022 à 13:07, Moises Calzado via gdal-dev a écrit :
Hello everyone,
We're performing some tests with ogrinfo trying to read GPKG files,
and we're facing some issues executing the command with remote GPKG
files in WAL
-only or in a read-only directory.
-Jukka Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: gdal-dev Puolesta Andrew C
Aitchison
Lähetetty: maanantai 19. syyskuuta 2022 17.18
Vastaanottaja: Moises Calzado
Kopio: gdal-dev@lists.osgeo.org
Aihe: Re: [gdal-dev] (no subject)
On Mon, 19 Sep 2022, M
On Mon, 19 Sep 2022, Moises Calzado via gdal-dev wrote:
Hello everyone,
We're performing some tests with ogrinfo trying to read GPKG files, and
we're facing some issues executing the command with remote GPKG files in
WAL mode. As can be checked in the following command output, ogr fails
while
Could you write a server side script that runs the ogrinfo command with r/w
rights to the upload directory?
-Jukka Rahkonen-
Lähettäjä: Moises Calzado
Lähetetty: maanantai 19. syyskuuta 2022 16.00
Vastaanottaja: Rahkonen Jukka
Aihe: Re: [gdal-dev] (no subject)
Oh no! We use ogrinfo to check
to change the pragma?
-Jukka Rahkonen-
Lähettäjä: Moises Calzado
Lähetetty: maanantai 19. syyskuuta 2022 14.46
Vastaanottaja: Rahkonen Jukka
Aihe: Re: [gdal-dev] (no subject)
Hi Jukka,
Thanks so much for taking a look at this! We already tried to change the
journal mode, and it works as expecte
o do that with
GDAL.
-Jukka Rahkonen-
Lähettäjä: gdal-dev Puolesta Moises Calzado
via gdal-dev
Lähetetty: maanantai 19. syyskuuta 2022 14.08
Vastaanottaja: gdal-dev@lists.osgeo.org
Aihe: [gdal-dev] (no subject)
Hello everyone,
We're performing some tests with ogrinfo trying to read GPKG files, an
Hello everyone,
We're performing some tests with ogrinfo trying to read GPKG files, and
we're facing some issues executing the command with remote GPKG files in
WAL mode. As can be checked in the following command output, ogr fails
while reading the file content:
ERROR: Error: Command failed:
Hi,
How can I can create FeatureCollection from :
```OGRMultiPolygon * poOGRMultiPolygon= (OGRMultiPolygon * )
unionCascaded;```
kind regards
--
Ahmet Temiz
Jeoloji Müh.
Afet ve Acil Durum Yönetimi Başkanlığı
Deprem Dairesi Başkanlığı
Ahmet Temiz
Geological Eng.
Hi,
I need example c++ code for raster masking and clipping.
Do you have any?
Regards
--
Ahmet Temiz
Jeoloji Müh.
Afet ve Acil Durum Yönetimi Başkanlığı
Bilgi İşlem Dairesi Başkanlığı-CBS Grubu
Ahmet Temiz
Geological Eng.
Information Systems - GIS Group
Disaster and
On 18 April 2018 at 13:57, Gane R wrote:
> Hi all,
>
> Is there any way to disable one or all OGR formats when building on Linux.
> i.e.,
> when using ./configure
>
> Is there any way to disable certain raster formats when building on Linux
Hi all,
Is there any way to disable one or all OGR formats when building on Linux.
i.e.,
when using ./configure
Is there any way to disable certain raster formats when building on Linux
Thanks
Ganesan
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
Hello,
Is there future GDAL release schedule available anywhere? I am actually
wondering about when is GDAL 2.2 is planned to be released? And are there
any more of 2.1.x releases ahead?
Thank you,
*Victor Chernetsky*
___
gdal-dev mailing list
On Tuesday 26 July 2016 16:37:14 Hema Yeedunuri wrote:
> aded images which uses wms services. I tried opening with
> gdalopen it is not working . the output format supported in geoserver is
> png / geotiff . but for a single band data the no. of bands i am getting
> are 3 . and null data is
hi all ,
I have build gdal-1.11.2 with libcurl support to read wms layers.it is
build sucessfully how can i read wms layers .I have geoserver on my
loalhost.I have loaded images which uses wms services. I tried opening with
gdalopen it is not working . the output format supported in geoserver is
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
Hello,
I have a shape file which consists of many polygons (say 56).
Programmatically I wish to select (say, one poly.) from them. I proceeded
something like this.
OGRLayer *clippingshp; unsigned int NumPolygons;
while((tempfeature=inlayer->GetNextFeature( ))!=NULL)
{
Hi,
CPLSetConfigOption( "GDAL_HTTP_PROXY",proxy.toLocal8Bit().data());
CPLSetConfigOption( "GDAL_PROXY_AUTH", "NTLM" );
CPLSetConfigOption( "GDAL_HTTP_PROXYUSERPWD", " : " );
how to make "bypass proxi for local adresses" ?
С уважением,
Константин Лапин
Hi Konstantin,
Can you explain your case. For example for WMS driver (TMS)
GDAL_HTTP_PROXY config option works for me.
Best regards,
Dmitry
01.10.2015 14:39, Константин Лапин пишет:
Hi,
CPLSetConfigOption( "GDAL_HTTP_PROXY",proxy.toLocal8Bit().data());
CPLSetConfigOption(
Dear Dr. Brad, Thanks for your kind and prompt reply. Below are my
answers/clarifications.
On Wed, 19 Aug 2015 04:01:32 PM user gdal wrote:
Dear friends,
I have to programmatically clip (using Visual C++) with
GDALWarp. I proceeded like this:
GDALDataset *outimg;
Friends I have a raster image (img) file with a coordinate system. How to
get the information through program, the X and Y spatial resolutions?
Thanks,
B. Ramesh
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
Dear Ramesh,
I guess that using gdalinfo nameoffile should work.
Cheers,
Ramiro
On 07/23/2015 12:30 PM, user gdal wrote:
Friends I have a raster image (img) file with a coordinate system. How
to get the information through program, the X and Y spatial resolutions?
Thanks,
B. Ramesh
Hi PSC,
Mikhail Gusev, one of our 2 GSoC student this year is about to submit a pull
request for the initial part of his - good - work on Geography Network Model.
See https://github.com/MikhanGusev/gdal/compare/OSGeo:trunk...trunk
This add a new set of API to the code base. Looking at our
GDALers:
I've not had this error before when compiling GDAL for Linux boxes, but I'm
getting some sqlite error. This is from:
./configure --prefix=/pathto/wherever --with=python
make
***
...
chmod a+x gdal-config
/bin/sh /projects/oa/shared/jgrn/code/src/gdal-1.10.1/libtool --mode=link
g++
Le jeudi 23 janvier 2014 17:09:41, Jonathan Greenberg a écrit :
GDALers:
I've not had this error before when compiling GDAL for Linux boxes, but I'm
getting some sqlite error. This is from:
./configure --prefix=/pathto/wherever --with=python
make
***
...
chmod a+x gdal-config
/bin/sh
To whom it may concern,
We have updates to the PCIDSK library that we would like to upstream to GDAL.
We have fixed numerous bugs, we have done many optimizations, and we also
implemented a new binary tile directory.
How should we proceed with the upstream?
Thanks,
Phelippe
Phelippe,
There are a few ways we could move forward on this.
I believe the apparent master version of the PCIDSK SDK from GDAL's point
of view is:
http://svn.osgeo.org/gdal/sandbox/warmerdam/pcidsk
And I think the process I used before was to periodally migrate this into
the GDAL tree at:
Hi all, I have a csv file named test.csv with the asociated test.vrt
*test.vrt*
OGRVRTDataSource
OGRVRTLayer name=test
SrcDataSourceC:\\Users\\FedericoJurio\\Desktop\\test.csv/SrcDataSource
GeometryTypewkbPoint/GeometryType
LayerSRSWGS84/LayerSRS
GeometryField
Le vendredi 08 novembre 2013 22:41:07, Federico Jurio a écrit :
Hi all, I have a csv file named test.csv with the asociated test.vrt
*test.vrt*
OGRVRTDataSource
OGRVRTLayer name=test
SrcDataSourceC:\\Users\\FedericoJurio\\Desktop\\test.csv/SrcDataSource
: [gdal-dev] (no subject)
Phelippe,
There are a few ways we could move forward on this.
I believe the apparent master version of the PCIDSK SDK from GDAL's point of
view is:
http://svn.osgeo.org/gdal/sandbox/warmerdam/pcidsk
And I think the process I used before was to periodally migrate
Friends,
I sent this mail on Friday. Request for a remedy. If someone can send a
built-in project (needn't be with a high end code) using MFC in VC++ 2008
in a Win Zip or RAR, it will be even better.
The error (pl. see No. 8) I got is
f:\sw\GDALexperiment\GDALexperiment\header\cpl_port.h: fatal
Ahmet Temiz ahmettemiz88 at gmail.com writes:
hello
can you tell me what is wrong with following expression:
(most likely regular expression)
ogr2ogr -where DETAY!='YRD_MUNHANI' or DETAY!='PAFTA_KENARI' or
DETAY!='KIYI' dene.shp h22a1top.shp
Hi,
Nothing wrong really, but because
hello
can you tell me what is wrong with following expression:
(most likely regular expression)
ogr2ogr -where DETAY!='YRD_MUNHANI' or DETAY!='PAFTA_KENARI' or
DETAY!='KIYI' dene.shp h22a1top.shp
regards
--
Ahmet Temiz
Jeoloji Müh.
Afet ve Acil Durum Yönetimi Başkanlığı
Planlama ve Zarar
Hello list
I'm using gdal on android.
I'm having problems reading data from tiff files larger than 2GB.
Smaller files works ok.
Is there a limit in android, or the android GDAL build? Is there some build
flag to make it work?
Thanks
Yehiyam Livneh
Sent from my mobile
http://etrange-nuitenchantee.com/market/aGet%20Rich!%20Make%20Money%20Fast%20and%20Get%20Rich%20Quick
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
Hi All,
With the some useful tips and code from gdal-dev@lists.osgeo.org I could
successfully complete a huge task to validate S58 checks .
Next up is developing a software where it creates a S57 data set .
Please give me any information pertaining to S57 data set creation
Thanks and Regards
s.r.kriis...@gmail.com
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
Hi All,
How do we get to know which S57 dataset has update sin it..
Thanks and Regards
Nikhil Sai Parupalli
Note: Do not print this email until and unless it is really required. Save
paper , stay Green
___
gdal-dev mailing list
---
Dennis Burgess, Mikrotik Certified Trainer Author of Learn RouterOS-
Second Edition
.It seems to be the biggest on-line shop! It’s fantastic!
http://phbalanse.no/friends.group.php?yfs=07r3
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
smime.p7m
Description: S/MIME encrypted message
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
I hope youll enjoy after visiting this site...
http://comitemarnebillard.com/friends_links.php?saolid=69te9
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
gdal 1.8.0 has problem. when the filename is in Chinese
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
Hello,
First time I come to this list.
I have a problem using FwTools 2.4.7 with VRT and CSV
I want to transform french geonames file to PostgreSQL with the geometry build
What I do to get this issue ?
Creation of a VRT called geonames.vrt containing
Thomas,
The CSV file is corrupted at line 51092.
43.21667,3.1,3018296,Fleury,Fleury,Fleury Bouches de
l'Aude,Fleury-d'Aude,Perignan,Pérignan,P,PPL,FR,,A9,11,113,11145,2713,,60,Europe/Paris,2007-09-08
Notice the extra double-quote character between Fleury and Bouches de l'Aude.
If you
I am simply trying to open a raster image, manipulate in NumPy and then spit
it back out in GDAL.
I am having trouble setting null data...
I tried: ds.GetRasterBand(1).SetNoDataValue( - )
but nothing seems to work.
Any help is appreciated!
Below is my code:
#! /usr/bin/env python
Discourse Maps wrote:
I am simply trying to open a raster image, manipulate in NumPy and then spit
it back out in GDAL.
I am having trouble setting null data...
I tried: ds.GetRasterBand(1).SetNoDataValue( - )
but nothing seems to work.
...
Dear Discourse Maps,
Presumably you should be
Roger,
this is weird indeed as I use daily MSYS on trunk... I'd bet that you have an
installed version of cpl_string.h in /usr/local/include that corresponds to the
1.6.3 version that didn't have the CPLIsUTF8 and CPLForceToASCII symbols. If
you've done a make install when building 1.6.3 before,
Hi Tamas,
2 issues directly related to the big raster dimensions :
* Currently GDAL allocates an array of pointer to raster blocks of size
nBlocksPerRow x nBlocksPerColumn where nBlocksPerRow =
(nRasterXSize+nBlockXSize-1) / nBlockXSize and nBlocksPerColumn =
(nRasterYSize+nBlockYSize-1) /
I have a city map in Cassini_Soldner projection with a separate file containing
the Soldner coordinates of the 4 corners.
I want to reproject it to WGS84 in order to render it e.g. with SharpMap and
display some GPS positions.
I have tried it with some different parameter settings of gdalwarp
@Frank and Hermann: Thanks a lot!
My other question is as follows:
1) gdal_translate -of AAIGrid a.tif a.asc
it creates the following: a.asc (ASC File), a.asc.aux (XML Document), and a
(IDL project file)...
now to do the reverse i do the following:
2) gdal_translate -of GTiff a.asc a.tif
it
2009/8/10 Riki Tiki mongoose_r...@mail.ru:
Hi All,
I was trying to write a c# program to copy the existing raster file to a new
raster file so that at the end i both files while displayed on tools like
arcmap will be exactly the same... i started as follows
string src_file =
Hi All,
I was trying to write a c# program to copy the existing raster file to a new
raster file so that at the end i both files while displayed on tools like
arcmap will be exactly the same... i started as follows
string src_file = @C:\raster1;
Gdal.AllRegister();
Dataset src_ds =
Thank you
Le MINH NHAT Dr. Eng.
Disaster Management Center (DMC)
Central Committe for Flood and Storm Control (CCFSC)
Ministry of Agriculture and Rural Development (MARD)
A4 No. 2 Ngoc Ha Str., Hanoi, Vietnam
Tel.: (84-4) 3 733 5686 / 3733 5805
Fax.: (84-4) 3733 6647 / 3733 5701
Hi all,
I have to convert DTED Level 1 data into DTED Level 0 data, and was just
wondering if anyone would be able to help?
Regards
_
View photos of singles in your area Click Here
Sjur Kolberg wrote:
Hello, GDAL list;
Can anyone suggest what prevents the following GDALSuggestedWarpOutput
from calculating an approximate geotransform? The resulting suggested
GeoTransform is just a copy of the original GeoTransform.
Version is GDAL 1.6.0beta1 under Windows XP, I use
a gdal with debug info, allowing me to track.
Best regards and thanks,
Sjur :-)
-Original Message-
From: Frank Warmerdam [mailto:warmer...@pobox.com]
Sent: Friday, May 15, 2009 4:34 PM
To: Sjur Kolberg
Cc: 'gdal-dev@lists.osgeo.org'
Subject: Re: [gdal-dev] (no subject)
Sjur,
I tried
Hello, GDAL list;
Can anyone suggest what prevents the following GDALSuggestedWarpOutput
from calculating an approximate geotransform? The resulting suggested
GeoTransform is just a copy of the original GeoTransform.
Version is GDAL 1.6.0beta1 under Windows XP, I use Visual Studio 2005,
I've not reviewed closely your code, but I'd suggest you to study the source
code for gdalwarp, that probably contains the missing bit.
I think you should probably try using GDALCreateGenImgProjTransformer2()
instead of GDALCreateGenImgProjTransformer(). That's what gdalwarp.cpp
does...
Hello, list,
I have a GDAL warp operation creating only missing-values in the target
map,
suggesting that the area I want to warp to is not covered by the
original image.
Trying to to trace the error, I find a strange behaviour of the
GDALSuggestedWarpOutput() call: The resulting target
I need to write multiple images to a NITF file. I notice on the gdal NITF page
that gdal only writes one image or raster of data to a file. On another page,
I see that multiple images in a NITF can be read as subdatasets. Is the
documentation up to date that subdatasets in a NITF file are a
Hi,
I'm an Italian university student and I'm working on LiDAR scanlations with
GRASS and the data I'm using were in LAS format.
One of the problem I've encountered is the conversion of the LAS file in file
that GRASS can manage (ASCII).
I
saw that this format is not present in your
63 matches
Mail list logo