Oliver King-Smith wrote:
I am trying to get some rules programmed into my magic tech file. In
particular I want to require metal to encompass the vias by 2um if the
metal is wide metal (10um x 10um). Otherwise I only need to
encompass the vias by 0.8um. Does anyone know how to
__
From: John Griessen j...@ecosensory.com
To: gEDA user mailing list geda-user@moria.seul.org
Sent: Sat, August 14, 2010 10:15:38 AM
Subject: Re: gEDA-user: edge4way rules in magic
Oliver King-Smith wrote:
I am trying to get some rules programmed into my
On Aug 14, 2010, at 1:28 PM, Oliver King-Smith wrote:
What do folks use for ASIC layout here?
I do schematic-level ASIC design and simulation for Osaka University with
gEDA/ngspice, but I don't do layout. Another company (in Japan) does that. I
believe they use Mentor Graphics tools for
I am trying to get some rules programmed into my magic tech file. In
particular I want to require metal to encompass the vias by 2um if the
metal is wide metal (10um x 10um). Otherwise I only need to
encompass the vias by 0.8um. Does anyone know how to specify this in
the drc
4 matches
Mail list logo