RE: VOTE: Tomcat - TLP
[X] +1 Vote in support Larry - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [VOTE] Updating PMC bylaws
=== [X] +1 - let's do it [ ] -1 - not good === Larry - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [VOTE] HiveMind as a Jakarta sub-project
[X] +1 I support this proposal [ ] -1 I don't support this proposal [ ] 0 I abstain from voting for or against this proposal Larry - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Products List available as of 31st May, 2003
Hi Tetsuya, A minor change. Jakarta Tomcat should be 3.3.1a instead of 3.3.1-alpha. The a is indicating it is a patched release derived from the 3.3.1 release, which was done to address a security problem. Thanks, Larry -Original Message- From: Tetsuya Kitahata [mailto:[EMAIL PROTECTED] Sent: Monday, June 02, 2003 8:21 AM To: Jakarta General List Subject: Products List available as of 31st May, 2003 Hello, (To: jakarta-general) Thanks to some feedbacks, probably this list is more accurate. And I am still waiting for the reports, feedbacks to this list. Sincerely, --Jakarta Productsas of 31st May, 2003-- Jakarta BCEL 5.1 Jakarta BSF 2.3.0 Jakarta Commons Commons-Proper BeanUtils 1.6.1 Betwixt 1.0-Alpha CLI 1.0 Codec 1.1 Collections 2.1 DBCP1.0 Digester1.5 Discovery 0.2-Pre-Release EL (Nightly Builds Only) FileUpload 1.0-Beta1 HttpClient 2.0-Beta1 Jelly 1.0-Beta3 Jexl(Nightly Builds Only) JXPath 1.1 Lang1.0.1 Latka 1.0-Alpha Logging 1.0.3 Modeler 1.0 Net 1.0.0 Pool1.0.1 Validator 1.0.2 Jakarta ECS 1.4.1 Jakarta JMeter1.8.1 Jakarta Log4j 1.2.8 Jakarta ORO 2.0.7 (2.0.8-dev) Jakarta POI 1.5.1 (1.10-dev) Jakarta Regexp1.2 (1.3-dev) Jakarta Taglibs 1.2 (Standard JSTL) Jakarta Watchdog 4.0.0 -- Jakarta Cactus1.4.1 Jakarta Lucene1.3-rc1 Jakarta Gump N/A Jakarta Struts1.1-rc1 Jakarta Tapestry 2.4-alpha5 (soon 3.0-beta-1) Jakarta Turbine 2.2.0 (2.3-dev) Fulcrum TDK JCS Jakarta Velocity 1.3.1 -- Jakarta Alexandria0.1 Jakarta Jetspeed 1.4.1-beta4 Jakarta Slide 1.0.16 Jakarta Tomcat3.3.1-alpha 4.1.24 5.0.2-alpha ---Jakarta Related-- Apache Ant Ant 1.5.3 Apache Avalon Framework Framework 4.1.3 Components Excalibur 4.1 Phoenix 4.0.3 LogKit 1.2 Apache DB OJB 1.0-rc3 Torque 3.1-alpha1 (3.1-alpha2-dev) Apache Httpd HTTPD 2.0.46 Apache Incubator AltRMI 0.9.1 FTPServer 0.1 (Lenya 1.0-rc) ... donated to Cocoon Apache James James 2.1.3 Apache Maven Maven 1.0-beta10 - - Tetsuya Kitahata -- Terra-International, Inc. E-mail: [EMAIL PROTECTED] http://www.terra-intl.com/ (Apache Jakarta Translation, Japanese) http://jakarta.terra-intl.com/ - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Misspelling
Fixed. Larry -Original Message- From: Pier Fumagalli [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 27, 2002 2:56 PM To: Jakarta General List Subject: FW: Misspelling -- Forwarded Message From: Kennedy, Scott, MDCT Trenton [EMAIL PROTECTED] Date: Wed, 27 Mar 2002 14:21:26 -0500 To: [EMAIL PROTECTED] Subject: Misspelling http://jakarta.apache.org/site/news.html#0327.1 release is misspelled as relase Regards, Scott -- End of Forwarded Message -- To unsubscribe, e-mail: mailto:[EMAIL PROTECTED] For additional commands, e-mail: mailto:[EMAIL PROTECTED] -- To unsubscribe, e-mail: mailto:[EMAIL PROTECTED] For additional commands, e-mail: mailto:[EMAIL PROTECTED]
[ANNOUNCEMENT] Tomcat 3.3 Beta 2
The second beta release of Tomcat 3.3 is available for download and testing. As a Tomcat 3.x release, it remains an implementation of the Servlet 2.2 and JSP 1.1 specifications. The Beta 2 release offers bug fixes over Beta 1, and some documentation updates. A lot of new information has been added to tomcat-ug.html and a new serverxml.html has been added. The serverxml.html documents a handful of the modules (a.k.a. interceptors) at this point, with more to come. Some documentation is still out of date, however. Again, refer to the readme for the most current information concerning Tomcat 3.3. If you did not try the earlier 3.3 releases, the following additional information may help you make full use of the Beta 2 release: 1) The binary distribution has source for the connectors, but not for the Tomcat container. The source from the full jakarta-tomcat CVS tree is available separately in the v3.3-b2/src directory. 2) The new class loader scheme in this release ignores your CLASSPATH setting. Instead, you may add needed jars to Tomcat's lib/apps, lib/common, and lib/container directories. See the tomcat-ug.html file in Tomcat's doc directory for details. Also supported are two System properties: org.apache.tomcat.apps.classpath org.apache.tomcat.common.classpath which add their listed classes and jars to the jars in lib/apps and lib/common, respectively. 3) The sanity-test is not part of the binary distribution like it was with Tomcat 3.2. However, it is available in War form (test.war), along with the Watchdog JSP (watchdog-jsp.war) and servlet tests (watchdog-servlet.war). These are found in the v3.3-b2/apps directory. Place these War files in Tomcat's webapps directory before starting Tomcat. To simplify testing, these tests can be run from the Admin web application. See the readme file in Tomcat's doc directory for details. Please download this release and give it a try in your environment. The source, rpms, and binaries may be found at: http://jakarta.apache.org/builds/jakarta-tomcat/release/v3.3-b2 To log problems or bugs, as well as submit patches, please refer to: http://jakarta.apache.org/site/bugs.html When logging bugs to Bugzilla, please specify the Program as Tomcat 3 and the Version as 3.3 Beta 2. Also, supplying a test case will greatly improve our ability to address the problem. Please do so if at all possible. Thanks, Larry Isaacs - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[ANNOUNCEMENT] Tomcat 3.3 Milestone 2
The second milestone release of Tomcat 3.3 is available for download and testing. As a Tomcat 3.x release, it remains an implementation of the Servlet 2.2 and JSP 1.1 specifications. The Milestone 2 release primarily offers bug fixes over Milestone 1. In this milestone release, documentation still hasn't caught up with some of the changes for Milestone 1 and this release. For this reason, be sure to read the "README" file found in Tomcat's "doc" directory. It contains documentation that covers some of the more important of the changes to Tomcat 3.3. If you have did not try the Milestone 1 release, the following additional information may help you make full use of the Milestone 2 release: 1) The binary distribution has source for the connectors, but not for the Tomcat container. The source for the full jakarta-tomcat CVS tree is available separately in the "v3.3-m2/src" directory. 2) The internal directory structure contained in the binary and source archives differs from Tomcat 3.2. The binary expands to a directory called "tomcat" and the source expands to "jakarta-tomcat". This matches what you would get if you checked out CVS source and built Tomcat from that source. New for the Milestone 2 release is that building Tomcat 3.3 from source creates the "build" and "dist" directories under the "jakarta-tomcat" directory instead of at the same level as "jakarta-tomcat". Also, jakarta-servletapi is not required, so its source is not included in the "v3.3-m2/src" directory. 3) The new class loader scheme in this release ignores your CLASSPATH setting. Instead, you may add needed jars to Tomcat's "lib/apps", "lib/common", and "lib/container" directories. See the "README" file in Tomcat's "doc" directory for details. New for Milestone 2 are two System properties: org.apache.tomcat.apps.classpath org.apache.tomcat.common.classpath which add their listed classes and jars to the jars in "lib/apps" and "lib/common", respectively. 4) The "sanity-test" is not part of the binary distribution like it was with Tomcat 3.2. However, it is available in "War" form, along with the Watchdog JSP and servlet tests. These are found in the "v3.3-m2/apps" directory. Place these War files in Tomcat's "webapps" directory before starting Tomcat. To simplify testing, these tests can be run from the Admin web application. See the "README" file in Tomcat's "doc" directory for details. 5) On Windows, there have been instances where the watchdog-jsp.jsp test fails to display successful tests. Running the watchdog-servlet.jsp first seems to avoid this. You can also restart Tomcat and re-run watchdog-jsp.jsp and it will display the successful tests. 6) The Admin web application's index.html file has an error in the commands it displays to change it to "trusted". "run" should appear before "-enableAdmin" when using the ".sh" and ".bat" files. This is documented correctly in the "README" in the "doc" directory. Please download this release and give it a try in your environment. The source, rpms, and binaries may be found at: http://jakarta.apache.org/builds/jakarta-tomcat/release/v3.3-m2 To log problems or bugs, as well as submit patches, please refer to: http://jakarta.apache.org/site/bugs.html When logging bugs to Bugzilla, please specify the Program as "Tomcat 3" and the Version as "Nightly Build". Thanks, Larry Isaacs - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[ANNOUNCEMENT] Tomcat 3.3 Milestone 1
The first milestone release of the next version of Tomcat 3.x is available for download and testing. As a Tomcat 3.x release, it remains an implementation of the Servlet 2.2 and JSP 1.1 specifications. In addition to bug fixes, a large amount of refactoring has gone into Tomcat 3.3m1 since Tomcat 3.2. Much of the code is still there, but cleaned up and likely in a new location. It is hoped with the changes that have occurred, you will find Tomcat 3.3 more flexible and easier to configure. You should also find improved performance over Tomcat 3.2. In this milestone release, documentation hasn't caught up with some of the more recent changes to Tomcat 3.3m1. For this reason, be sure to read the "README" file found in Tomcat's "doc" directory. It contains documentation that covers some of the more important of these recent changes to Tomcat 3.3. In addition to the "README" file, the following notes provide some additional information you will need to make full use of this release: 1) The binary distribution has source for the connectors, but not for the Tomcat container. The source for the full jakarta-tomcat CVS tree is available separately in the "v3.3-m1/src" directory. 2) The internal directory structure contained in the binary and source archives differs from Tomcat 3.2. The binary expands to a directory called "tomcat" and the source expands to "jakarta-tomcat". This matches what you would get if you checked out CVS source and built Tomcat from that source. 3) The new class loader scheme in this release ignores your CLASSPATH setting. Instead, you are expected to add needed jars to Tomcat's "lib", "lib/common", and "lib/shared" directories. See the "README" file in Tomcat's "doc" directory for details. 4) The "sanity-test" is not part of the binary distribution like it was with Tomcat 3.2. However, it is available in "War" form, along with the Watchdog JSP and servlet tests. These are found in the "v3.3-m1/apps" directory. Place these War files in Tomcat's "webapps" directory before starting Tomcat. To simplify testing, these tests can be run from the Admin web application. See the "README" file in Tomcat's "doc" directory for details. 5) On Windows 9x, there have been instances where the watchdog-jsp.jsp test failed to run when the jsp was first compiled. If this happens, try refreshing the page to get the test to run. Note: There is one expected failure, "positiveScriptlet.jsp", when the watchdog-jsp.jsp test is run again without restarting Tomcat 3.3. 6) For the watchdog-servlet.jsp test file to run, you must copy jakarta-tools' "moo.jar" and jakarta-watchdog's "client.jar" to Tomcat's "webapps/admin/WEB-INF/lib" directory before starting Tomcat. Both of these jars are found in the "v3.3-m1/bin" directory. These will be included in the admin.war in the next release. 7) The Admin web application's index.html file has an error in the commands it displays to set it to "trusted". "run" should appear before "-enableAdmin" when using the ".sh" and ".bat" files. This is documented correctly in the "README" in the "doc" directory. Please download this release and give it a try in your environment. The source, rpms, and binaries may be found at: http://jakarta.apache.org/builds/tomcat/release/v3.3-m1 To log problems or bugs, as well as submit patches, please refer to: http://jakarta.apache.org/site/bugs.html When logging bugs to Bugzilla, please specify the Program as "Tomcat 3" and the Version as "Nightly Build". I would like to thank all those who have volunteered their time and efforts to bring Tomcat 3.3m1 to this point. I look forward to continuing the effort to bring Tomcat 3.3 to a final release. Thanks, Larry Isaacs - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
