Re: [gentoo-ppc-user] mounting USB flash disk
Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] mounting USB flash disk
and the root hubs (ID :)
Thanks
nick
Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]:
I am on a powerbook G4 800mhz and it is
plugged into the back of the computer (port 2). Does anyone know
how to solve this problem?
thanks
nick
First, next time, please start a new thread instead of replying to
an existing one.
That said, you'll have to provide more information. Can you give us
the
kernel messages from dmesg related to the USB stick? Are you sure
you
have USB disk support and generic scsi disk support in your kernel?
-Joe
--
gentoo-ppc-user@gentoo.org mailing list
Sorry about replying instead of starting again.
Are there any just-X11 browsers besides links -g that I can use?
Whenever I press the back arrow it goes back and deletes the email I
was writing.
Anyway, the only messages in dmesg (I do not know why) are keypress
events!?!
I used to be informative, but now all it has are keypresses...
I have SCSI support, and USB mass storage (with all sub-options)
compiled-in.
Do I need to add support for SCSI disks, CDROMS, generic devices, etc
in order for USB versions of those to work?
Thanks,
nick
--
gentoo-ppc-user@gentoo.org mailing list
Hello Nick,
You need modules for SCSI device support, SCSI disk support and please
enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card
Readers. As long as the USB is hotpluggable, you should install hotplug
and udev packages.
A good idea is to put the USB Disk in and to have look in dmesg
and/or /var/log/messages.
Normally I the disk should recognized by the kernel and produce at least
some messages. (May be a lsusb show if there is something recognized.)
Best regards Joerg
--
gentoo-ppc-user@gentoo.org mailing list
# $Header:
/var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo,v 1.5
2005/05/12 05:46:10 mr_bones_ Exp $
#
# Syslog-ng default configuration file for Gentoo Linux
# contributed by Michael Sterrett
options {
chain_hostnames(off);
sync(0);
# The default action of syslog-ng 1.6.0 is to log a STATS line
# to the file every 10 minutes. That's pretty ugly after a while.
# Change it to every 12 hours so you get a nice daily update of
# how many messages syslog-ng missed (0).
stats(432000);
};
source src { unix-stream(/dev/log); internal(); pipe(/proc/kmsg); };
destination messages { file(/var/log/messages); };
# By default messages are logged to tty12...
# destination console_all { file(/dev/tty12); };
# ...if you intend to use /dev/console for programs like xconsole
# you can comment out the destination line above that references /dev/tty12
# and uncomment the line below.
destination console_all { file(/dev/console); };
log { source(src); destination(messages); };
log { source(src); destination(console_all); };
Re: [gentoo-ppc-user] mounting USB flash disk
Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] mounting USB flash disk
Hello Nick, I checked your syslog-ng.conf. The only difference is logging to /dev/console instead of /dev/tty12. Just give it a try. I suggest to solve the problems in the order as they appear while booting. So first of all you need an working syslog-ng. I installed version 1.6.8-r1 with default syslog-ng.conf. Please try syslog-ng -s /etc/syslog-ng/syslog-ng.conf;echo $? to check your config file. After this please check your hotplug config: cat /proc/sys/kernel/hotplug It should be /sbin/udevsend. To find out what goes wrong you should make an lsusb which is provided by sys-apps/usbutils. Best regards Joerg Am Sonntag 11 Dezember 2005 20:52 schrieb [EMAIL PROTECTED]: Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] mounting USB flash disk
Hello Nick, please start syslog-ng -d on a command line, so that you see debug messages. Best reagrds Joerg Am Sonntag 11 Dezember 2005 20:52 schrieb [EMAIL PROTECTED]: Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] mounting USB flash disk
This also fails (with same error 'Error initalizing configuration, exiting.'). I am having trouble with dbus/hald/dcop, and those are required for XFCE/GNOME/KDE and metalog. I was thinking that metalog instead of syslog-ng would work, but I guess not... nick Hello Nick, please start syslog-ng -d on a command line, so that you see debug messages. Best reagrds Joerg Am Sonntag 11 Dezember 2005 20:52 schrieb [EMAIL PROTECTED]: Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] mounting USB flash disk
here is the dmesg output I finally got from booting. Thanks so much, nick Hello Nick, please start syslog-ng -d on a command line, so that you see debug messages. Best reagrds Joerg Am Sonntag 11 Dezember 2005 20:52 schrieb [EMAIL PROTECTED]: Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list egistered as minor 2 i2c_adapter i2c-2: registered as adapter #2 Found KeyWest i2c on mac-io, 1 channel, stepping: 4 bits tas driver [TAS3004 driver V 0.3]) using i2c address: 0x35 from device-tree i2c-core: driver tas registered. i2c_adapter i2c-2: client [tas Digital Equalizer] registered to adapter registering 2-0035 ohci1394: fw-host0: IntEvent: 00030010 ohci1394: fw-host0: irq_handler: Bus reset requested ohci1394: fw-host0: Cancel request received ohci1394: fw-host0: Got RQPkt interrupt status=0x8409 ohci1394: fw-host0: SelfID interrupt received (phyid 0, root) ohci1394: fw-host0: SelfID packet 0x807f8842 received ieee1394: Including SelfID 0x807f8842 ohci1394: fw-host0: SelfID for this node is 0x807f8842 ohci1394: fw-host0: SelfID complete ohci1394: fw-host0: PhyReqFilter= ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 ieee1394: NodeMgr: Processing host reset for knodemgrd_0 ohci1394: fw-host0: Single packet rcv'd ohci1394: fw-host0: Got phy packet ctx=0 ... discarded Audio jack unplugged, enabling speakers. chan: 0, addr: 0x35, transfer len: 1, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 1, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt mode... transfer done, result: 0 chan: 0, addr: 0x35, transfer len: 15, read: 0 using interrupt
Re: [gentoo-ppc-user] mounting USB flash disk
I finally just unmerged syslog-ng and reemerged it, but it still had the same error. It also failed on both with both /dev/tty12 and /dev/console. syslog-ng -s /etc/syslog-ng/syslog-ng.conf;echo $? returns 0 :-( I ran lsusb -vv and I have attached the output (minus flashdrive serial number) Luckily, cat /proc/sys/kernel/hotplug is correct. Are there any other good loggers? I am currently emerging metalog... thanks for all the help, nick Hello Nick, I checked your syslog-ng.conf. The only difference is logging to /dev/console instead of /dev/tty12. Just give it a try. I suggest to solve the problems in the order as they appear while booting. So first of all you need an working syslog-ng. I installed version 1.6.8-r1 with default syslog-ng.conf. Please try syslog-ng -s /etc/syslog-ng/syslog-ng.conf;echo $? to check your config file. After this please check your hotplug config: cat /proc/sys/kernel/hotplug It should be /sbin/udevsend. To find out what goes wrong you should make an lsusb which is provided by sys-apps/usbutils. Best regards Joerg Am Sonntag 11 Dezember 2005 20:52 schrieb [EMAIL PROTECTED]: Sorry, links ate the rest of my message. syslog-ng dies with bad config file hotplug usb: Bad USB agent invocation, no action and dmesg still only shows the keypresses (I got rid of Kernel hacking- debugging). I also added SCSI multi-LUN support, HD support, and general device support. USB mass storage became module (to test in MOL). and I also tried to fix my windowing problems with GNOME, KDE, and XFCE (all installed, all failing) by making radeonfb a module. sorry, nick and the root hubs (ID :) Thanks nick Am Sonntag 11 Dezember 2005 17:07 schrieb [EMAIL PROTECTED]: I am on a powerbook G4 800mhz and it is plugged into the back of the computer (port 2). Does anyone know how to solve this problem? thanks nick First, next time, please start a new thread instead of replying to an existing one. That said, you'll have to provide more information. Can you give us the kernel messages from dmesg related to the USB stick? Are you sure you have USB disk support and generic scsi disk support in your kernel? -Joe -- gentoo-ppc-user@gentoo.org mailing list Sorry about replying instead of starting again. Are there any just-X11 browsers besides links -g that I can use? Whenever I press the back arrow it goes back and deletes the email I was writing. Anyway, the only messages in dmesg (I do not know why) are keypress events!?! I used to be informative, but now all it has are keypresses... I have SCSI support, and USB mass storage (with all sub-options) compiled-in. Do I need to add support for SCSI disks, CDROMS, generic devices, etc in order for USB versions of those to work? Thanks, nick -- gentoo-ppc-user@gentoo.org mailing list Hello Nick, You need modules for SCSI device support, SCSI disk support and please enable 'Probe all LUNs on each SCSI device' as it helps with Multi Card Readers. As long as the USB is hotpluggable, you should install hotplug and udev packages. A good idea is to put the USB Disk in and to have look in dmesg and/or /var/log/messages. Normally I the disk should recognized by the kernel and produce at least some messages. (May be a lsusb show if there is something recognized.) Best regards Joerg -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list -- gentoo-ppc-user@gentoo.org mailing list Bus 002 Device 002: ID 0634:3400 Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 0.02 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0634 idProduct 0x3400 bcdDevice1.00 iManufacturer 1 Crucial iProduct2 Gizmo iSerial 3 XXX bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 MaxPower 120mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type none wMaxPacketSize
