Re: [gentoo-user] Synaptics touchpad, kernel 2.6, XFree 3.3

Jose, --On Friday, February 13, 2004 01:32:59 +0100 Jose González Gómez <[EMAIL PROTECTED]> wrote: Hi there, Is there anybody out there with a laptop with kernel 2.6, XFree 3.3 and a working Synaptics touchpad? I've found the following links: I do. What, specifically, is it your looking

[gentoo-user] kdepim-3.2.0-r2 failure

Morning all, OK, I'm stuck. The problem is 24 hours old and my first instinct was to assume it was a bug in one of the ebuilds I've merged in the last 36 hours. But after monitoring the list, it would appear it's a unique localized problem. I'm running two Gentoo systems here very similar to s

Re: [gentoo-user] 2.6.0_test8 + Inspiron [Update 2]

Kevin, Bring me up to speed on what you've done so far... when you say you can't get card manager working, what specifically are you doing to enable it? Do you have PCMCIA-CS sources installed? Do you have your /etc/init.d/net.* scripts auto-starting? Best, /tom --On Saturday, October 25, 2003

Re: [gentoo-user] 2.6.0-test8 + Inspiron [UPDATE]

Kevin, Try this (from my kernel .config): # # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_YENTA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_TCIC is not set You could also enable any of the above (or all for that matter), and load them after-the-fact. At a minimum, you'll need CONF

Re: [gentoo-user] 2.6.0-test8 + Inspiron [UPDATE]

Hi Dave, --On Friday, October 24, 2003 16:26:02 -0400 David Olsen <[EMAIL PROTECTED]> wrote: On 2003-10-24 at 15:52:39, Tom Syroid <[EMAIL PROTECTED]> wrote: * I have the ORINOCO and ORINOCO-CS drivers comiled as modules (in my prior gentoo-2.4.20-r5 install, the card worked f

Re: [gentoo-user] 2.6.0-test8 + Inspiron [UPDATE]

Robert, Kevin, Paul (and anyone else following this thread)... /// NOTE: I had to strip the attachments -- you want 'em, email me off-list /// Mmmm. What is it about us geek-minded-folk that would inspire us to blow away a perfectly good working kernel configuration, start over with a new one,

[gentoo-user] 2.6.0-test8 + Inspiron

Good day, I'd like to take another stab at the 2.6.x kernel series on my Dell Inspiron (8000). While I'm hardly a newbie, the last time I tried to configure a 2.5/6 kernel on this system, I was somewhat -less- than successful; after two days I gave up in disgust ;-) Anyone on the list have .co

Re: [gentoo-user] Zope/Plone

Thanks for the response, Jean... --On Friday, August 08, 2003 01:27:49 +0200 Jean Jordaan <[EMAIL PROTECTED]> wrote: I can't log in to the admin account, no way - no how. I've tried the zpasswd.py command/script. This password should get you in at http://:/manage i.e. the root of the Zope ser

[gentoo-user] Zope/Plone

OK, I'm thoroughly stumped and can't find an answer on any of the Plone message lists. I installed Zope/Plone today to evaluate it for a pending project. Emerged without error. No admin user password provided in the install script (documentation says it should be displayed). I can't log in to

Re: [gentoo-user] SUMMARY: Kernel 2.6.0 test1 Exploits

Kurt, --On Wednesday, July 16, 2003 10:30:26 -0400 Kurt Bechstein <[EMAIL PROTECTED]> wrote: Have you installed module-init-tools? I am now ;-) I changed my make profile to ~x86. module-init-tools was not previously installed; installing it now along with everything else to bring my system up

Re: [gentoo-user] SUMMARY: Kernel 2.6.0 test1 Exploits

Jason, --On Wednesday, July 16, 2003 13:43:34 +0900 Jason Stubbs <[EMAIL PROTECTED]> wrote: Did you make a symlink from /usr/src/linux to /usr/src/linux-test1-2.6.0 or whatever it is? When you re-emerge nvidia-kernel, it looks at your kernel version via the kernel source at that symlink and if

Re: [gentoo-user] SUMMARY: Kernel 2.6.0 test1 Exploits

e is 1.0.4363-r2. Same as yours? Perhaps it's something to do with the new modutils package for 2.5/6 Dan Foster pointed me to... Thanks for the input. /tom // Scott Carmichael - http://jobe.ca/ Tom Syroid said on 07.15.03 at 22:33: Evening all, Just a quick note to recap -- for anyone inte

Re: [gentoo-user] SUMMARY: Kernel 2.6.0 test1 Exploits

Dan, --On Wednesday, July 16, 2003 04:46:13 + Dan Foster <[EMAIL PROTECTED]> wrote: Doesn't grub require you to enter the decimal equivalent? vga=794 might be a better option? I'll give it a try. Wasn't aware of this, but thanks for the insight. * Using /etc/modules.autoload.d/kernel-2.4:

[gentoo-user] SUMMARY: Kernel 2.6.0 test1 Exploits

Evening all, Just a quick note to recap -- for anyone interested -- my exploits with 2.6.0 over the past 24 hours (with thanks to Terje for his encouragement ;-). I've managed to enable what I'll call "quasi" fb support -- that is, small fonts similar to what one would get with fb buffer/video

[gentoo-user] Kernel 2.6 Test

I'm preparing to build/test the new 2.6 kernel on my dual Athlon box. I'm current running gentoo-sources 2.4.20-r5. My question is this: In the past it's been noted on numerous occasions the importance of having the link /usr/src/linux pointing to the current kernel before configuration. Does t

[gentoo-user] [OT] The Computer Geek Diet

Morning all, As an humorous change of pace to all the serious "stuff" that's been tossed around on this list over the past week or so, check out Nick Petreley's LinuxWorld column this week: j In particular, the Gentoo Geek Calorie Guide: Gentoo Linu

Re: [gentoo-user] Packages Downgraded??

What gives is you updated Portage, which in turn updated /etc/make.conf, and you probably elected to overwrite your old file with the new shiny one. Try putting back the ACCEPT_KEYWORDS flag. /tom --On Wednesday, February 26, 2003 18:22:58 -0800 Arlo <[EMAIL PROTECTED]> wrote: I just updated