Hello again Richard,
Well, the plot thickens...
I found that the header file with the ToPIC97 information is
/usr/src/linux/drivers/pcmcia/topic.h
on both SuSE and gentoo, and on my SuSE system that was indeed
included by the i82365 driver as I has surmised
[EMAIL PROTECTED]:/usr/
On Wed, Jun 01, 2005 at 07:43:16PM +0200, Richard Fish wrote:
>
> Grepping the 2.6 sources for "ToPIC97" indicates you need the "yenta"
> driver. It is probably best to compile that into your kernel, not as a
> module.
Hi Richard,
That surprises me, because in the configuration
bus opti
Digby Tarvin wrote:
>Hi Nick and Richard,
>
>Thanks for both of your comments...
>
>On Wed, Jun 01, 2005 at 02:46:27PM +1200, Nick Rout wrote:
>
>
>>On Wed, 1 Jun 2005 00:58:16 +0100
>>Digby Tarvin wrote:
>>
>>
>>
>>>But when I try to run /etc/init.d/pcmcia start on gentoo I get
>>> PCMC
Further to my earlier post...
I forgot to mention - one obvious thing to ask would be 'was the card
recognised by the installation CD or when usign genkernel?'
The answer is - I don't know, because
This notebook has no CD-Rom, and the only way to connect one would be
via PCMCIA or USB, and I
Hi Nick and Richard,
Thanks for both of your comments...
On Wed, Jun 01, 2005 at 02:46:27PM +1200, Nick Rout wrote:
> On Wed, 1 Jun 2005 00:58:16 +0100
> Digby Tarvin wrote:
>
> > But when I try to run /etc/init.d/pcmcia start on gentoo I get
> > PCMCIA support detected.
> > Starting pcm
>Unless it is a cardbus slot and PCcard, in which case neither pcmcia
>cardmgr nor "/etc/init.d/pcmcia start" is necessary. In modern laptops,
>you do not even need to emerge pcmcia-cs unless you need to use some
>ancient PCMCIA card
>
>
>
Sorry, never mind. I went back and read the OP ag
Nick Rout wrote:
>On Wed, 1 Jun 2005 00:58:16 +0100
>Digby Tarvin wrote:
>
>
>>But when I try to run /etc/init.d/pcmcia start on gentoo I get
>> PCMCIA support detected.
>> Starting pcmcia...
>> cardmgr failed to start. Make sure that you have PCMCIA
>> modules built or supp
On Wed, 1 Jun 2005 00:58:16 +0100
Digby Tarvin wrote:
> But when I try to run /etc/init.d/pcmcia start on gentoo I get
> PCMCIA support detected.
> Starting pcmcia...
> cardmgr failed to start. Make sure that you have PCMCIA
> modules built or support compiled into the ke
Hi all,
I am in the process of trying to upgrade my trusty Libretto 110CT from
SuSE Linux 7.3 (2.4.10 kernel) to the latest gentoo.
Base system is now coming up fine, but my PCMCIA lan card is not
being recognised.
Any suggestions on where I should look?
I did a manual config of the kernel, ena
9 matches
Mail list logo
