AJ Spagnoletti wrote:
Using the link you posted I was able to get similar numbers on my
card, if you scroll down to the bottom of the page there where it
talks about driconf, and set up your drirc file you should be able to
apply these settings system wide. I am still have some issues with
http://en.gentoo-wiki.com/wiki/Intel_GMA
which is pertinent to my hardware and kernel/drivers. Therefore if I do
- vblank_mode=0 glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
get fences failed: -1
param: 6, val: 0
4418 frames in 5.0 seconds = 883.510
On Thu, 28 May 2009 01:44:58 -0400, Valmor de Almeida wrote:
Anytime I fireup openoffice-3.0.0 components, I get this message at the
command prompt:
get fences failed: -1
param: 6, val: 0
I used to get this, although it caused no apparent problems. The message
disappeared after upgrading
Neil Bothwick wrote:
On Thu, 28 May 2009 01:44:58 -0400, Valmor de Almeida wrote:
Anytime I fireup openoffice-3.0.0 components, I get this message at the
command prompt:
get fences failed: -1
param: 6, val: 0
I used to get this, although it caused no apparent problems. The message
- glxgears
get fences failed: -1
param: 6, val: 0
300 frames in 5.0 seconds = 59.565 FPS
298 frames in 5.0 seconds = 59.524 FPS
299 frames in 5.0 seconds = 59.737 FPS
300 frames in 5.0 seconds = 59.884 FPS
I have run into this same problem following an xorg-server upgrade,
The problem
AJ Spagnoletti wrote:
- glxgears
get fences failed: -1
param: 6, val: 0
300 frames in 5.0 seconds = 59.565 FPS
298 frames in 5.0 seconds = 59.524 FPS
299 frames in 5.0 seconds = 59.737 FPS
300 frames in 5.0 seconds = 59.884 FPS
I have run into this same problem following an
Hello,
Anytime I fireup openoffice-3.0.0 components, I get this message at the
command prompt:
get fences failed: -1
param: 6, val: 0
and a line in the /var/log/messages file
[drm:i915_getparam] *ERROR* Unknown parameter 6
does anyone know what these mean? The application runs but
7 matches
Mail list logo