Roman Dobosz gry...@op.pl wrote:
Also, cdrecord doesn't work:
# cdrecord -v -dev=4,0,0 /mnt/data/t.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive
On Mon, 16 Aug 2010 14:29:45 +0200
joerg.schill...@fokus.fraunhofer.de (Joerg Schilling) wrote:
It seems that the workaround for the Pioneer firmware bug does not handle the
multi-border case.
So, it means, that this is hardware failure?
Track Sess Type Start Addr End Addr Size
On Mon, 16 Aug 2010 20:54:02 +0200
Roman Dobosz gry...@op.pl wrote:
Vendor_info: 'PIONEER '
Identifikation : 'DVD-RW DVR-216D'
Revision : '1.08'
Damn. So this was really Pioneer (and partially my) fault. After
firmware upgrading, cdrecord is working just
On Tue, 10 Aug 2010 22:27:27 +0200
li...@gabriel-striewe.de wrote:
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
[...]
I have the similar problem on standard kernel 2.6.34-gentoo-r1:
# growisofs -Z
On Wed, Aug 11, 2010 at 06:06:18PM +0200, Joerg Schilling wrote:
li...@gabriel-striewe.de wrote:
Ritek may not be the best media quality. Did you try Verbatim?
J?rg
They were from Aldi, however I used also CDR from there, they seem to
be manufactured by Plasmon Data Systems
On Tue, Aug 10, 2010 at 11:14:55PM +0200, Joerg Schilling wrote:
li...@gabriel-striewe.de wrote:
Hello,
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
I get the following output:
li...@gabriel-striewe.de wrote:
/etc/init.d/hald status
* status: stopped
using cdrecord on a DVD+RW works fine, but I have this error when I
try to burn a DVD-R:
OK, could you send the outout from cdrecord -v -minfo
with this medium?
Jörg
--
EMail:jo...@schily.isdn.cs.tu-berlin.de
On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
li...@gabriel-striewe.de wrote:
/etc/init.d/hald status
* status: stopped
using cdrecord on a DVD+RW works fine, but I have this error when I
try to burn a DVD-R:
OK, could you send the outout from cdrecord -v -minfo
On Wed, Aug 11, 2010 at 05:00:45PM +0200, Joerg Schilling wrote:
li...@gabriel-striewe.de wrote:
On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
li...@gabriel-striewe.de wrote:
/etc/init.d/hald status
* status: stopped
using cdrecord on a DVD+RW works
li...@gabriel-striewe.de wrote:
Ritek may not be the best media quality. Did you try Verbatim?
J?rg
They were from Aldi, however I used also CDR from there, they seem to
be manufactured by Plasmon Data Systems (both are labeled
Tevion). With those CDR I have usually no problem. I
Hello,
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
I get the following output:
Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
Total translation table size: 0
Total rockridge
li...@gabriel-striewe.de wrote:
Hello,
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
I get the following output:
Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
Total
On Tue, Aug 10, 2010 at 10:27:27PM +0200, li...@gabriel-striewe.de wrote:
Hello,
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
I get the following output:
Executing 'mkisofs -R -J test/ |
13 matches
Mail list logo