On Saturday 21 April 2007 17:07, Matthew Daubenspeck wrote:
On Fri, Apr 20, 2007 at 11:30:47PM +0100, Mick wrote:
wlan0: encryption modes supported: none
You need to define the encryption mode and module as suggested above.
I have tried that as well and have copied settings and iwconfig
On Fri, Apr 20, 2007 at 11:30:47PM +0100, Mick wrote:
iwconfig wlan0 mode Managed key hexkey essid local_wireless_wap channel
11 rate 54M
Try managed in lower case - may make a difference.
I tried that, just to be sure. Same result.
Also, I assume that where you have key hexkey you
On Friday 20 April 2007 18:48, Matthew Daubenspeck wrote:
I am trying to get wireless working on an x86 install using ndiswrapper.
It worked for about 2 days, then stopped for no reason.
modprobe works:
net5416 : driver installed
device (168C:0024) present
Although running a
On 7/18/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the forum
to re-install it
Which kernel? As I recall, ndiswrapper requires a kernel with a
On 7/18/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the forum
to re-install it
Every time I do Modprobe ndiswrapper I get a fatal error saying that
On 7/18/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks:
I rebuilt my kernel the other day and my wireless nick suddenly
stopped
operating, I re-emerged NDISWRAPPER and followed the howto on the
forum
to re-install it
Which kernel? As I recall, ndiswrapper requires a
On 20/04/06, Fernando Meira [EMAIL PROTECTED] wrote:
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbsAre you using a USB based wifi adapter? I got this error
On 4/22/06, Gary Walker [EMAIL PROTECTED] wrote:
On 20/04/06, Fernando Meira
[EMAIL PROTECTED] wrote:
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbsAre
you
Try
# env-update
#source /etc/profile
DOH!!!
reboot with hardware still connected :)
On Sun, 2006-04-23 at 00:50 +0200, Fernando Meira wrote:
On 4/22/06, Gary Walker [EMAIL PROTECTED] wrote:
On 20/04/06, Fernando Meira
Colin wrote:
Finally. I'm sending this email from a working Gentoo system.
My wireless card (D-Link DWL-120+, ACX100 chipset) had trouble with
acx100, so I unmerged that and gave ndiswrapper a shot. As you can see,
it works, despite not being listed on ndiswrapper's compatibility page.
(I
Craig Duncan wrote:
Colin wrote:
Finally. I'm sending this email from a working Gentoo system.
My wireless card (D-Link DWL-120+, ACX100 chipset) had trouble with
acx100, so I unmerged that and gave ndiswrapper a shot. As you can see,
it works, despite not being listed on ndiswrapper's
11 matches
Mail list logo