Re: [gentoo-user] getnoo system freeze at boot on - mounting misc binary format filesystem
On 1/24/21 4:11 PM, the...@sys-concept.com wrote: > New installation. > When I boot system freeze after: > mounting misc binary format filesystem . [OK] > > I run fsck.ext4 on all partitions. I can login to the system via ssh > > dmesg doesn't show any errors: > > [2.361518] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for > UNIX platforms 455.45.01 Thu Nov 5 22:55:44 UTC 2020 > [2.364037] [drm] [nvidia-drm] [GPU ID 0x0800] Loading driver > [2.364038] [drm] Initialized nvidia-drm 0.0.0 20160202 for :08:00.0 > on minor 0 > [2.455612] nvidia-smi (787) used greatest stack depth: 12592 bytes left > [2.546763] EXT4-fs (nvme0n1p4): re-mounted. Opts: (null) > [2.583028] Adding 524284k swap on /dev/nvme0n1p3. Priority:-2 extents:1 > across:524284k SS > [2.605406] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data > mode. Opts: (null) > [2.672221] elogind-daemon[1307]: New seat seat0. > [2.672613] elogind-daemon[1307]: Watching system buttons on > /dev/input/event1 (Power Button) > [2.672639] elogind-daemon[1307]: Watching system buttons on > /dev/input/event0 (Power Button) > [2.728216] ip (1443) used greatest stack depth: 12320 bytes left > [2.735102] elogind-daemon[1307]: Watching system buttons on > /dev/input/event13 (Logitech USB Keyboard) > [2.735154] elogind-daemon[1307]: Watching system buttons on > /dev/input/event14 (Logitech USB Keyboard) > [2.931612] ip (1734) used greatest stack depth: 12264 bytes left > [5.916664] igb :04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps > Full Duplex, Flow Control: RX/TX > [6.018743] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready > [ 13.654042] random: crng init done > [ 13.654044] random: 7 urandom warning(s) missed due to ratelimiting > [ 37.712659] elogind-daemon[1307]: New session 1 of user root. It has something to do with EFI. I did not configure the system to use EFI with grub. When the system boots the fonts on the screen are large. It display on the screen everything up the point: ... mounting misc binary format filesystem . [OK] at this point the fonts are changed and the screen is not not displaying anything it looks like it is frozen and the is no "login" prompt. When I enable XDM the boot login shows up and I can long-in via "slim" login manager. In make.conf: ... INPUT_DEVICES="evdev" VIDEO_CARDS="nvidia" Does it have something to do with "x11-base/xorg-server" or "nvidia" driver? How to configure the system so it will display/switch the fonts during boot on the screen?
[gentoo-user] getnoo system freeze at boot on - mounting misc binary format filesystem
New installation. When I boot system freeze after: mounting misc binary format filesystem . [OK] I run fsck.ext4 on all partitions. I can login to the system via ssh dmesg doesn't show any errors: [2.361518] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 455.45.01 Thu Nov 5 22:55:44 UTC 2020 [2.364037] [drm] [nvidia-drm] [GPU ID 0x0800] Loading driver [2.364038] [drm] Initialized nvidia-drm 0.0.0 20160202 for :08:00.0 on minor 0 [2.455612] nvidia-smi (787) used greatest stack depth: 12592 bytes left [2.546763] EXT4-fs (nvme0n1p4): re-mounted. Opts: (null) [2.583028] Adding 524284k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:524284k SS [2.605406] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) [2.672221] elogind-daemon[1307]: New seat seat0. [2.672613] elogind-daemon[1307]: Watching system buttons on /dev/input/event1 (Power Button) [2.672639] elogind-daemon[1307]: Watching system buttons on /dev/input/event0 (Power Button) [2.728216] ip (1443) used greatest stack depth: 12320 bytes left [2.735102] elogind-daemon[1307]: Watching system buttons on /dev/input/event13 (Logitech USB Keyboard) [2.735154] elogind-daemon[1307]: Watching system buttons on /dev/input/event14 (Logitech USB Keyboard) [2.931612] ip (1734) used greatest stack depth: 12264 bytes left [5.916664] igb :04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [6.018743] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 13.654042] random: crng init done [ 13.654044] random: 7 urandom warning(s) missed due to ratelimiting [ 37.712659] elogind-daemon[1307]: New session 1 of user root.
Re: [gentoo-user] BIOS can not find boot partition
On 1/24/21 5:03 AM, Michael wrote: > On Sunday, 24 January 2021 05:49:28 GMT the...@sys-concept.com wrote: >> I'm missing something as system can not find boot device >> >> fdisk /dev/nvme0n1 >> Disklabel type: gpt >> >> Device StartEndSectors Size Type >> /dev/nvme0n1p1 2048 6143 4096 2M BIOS boot >> /dev/nvme0n1p2 6144 268287 262144 128M EFI System >> /dev/nvme0n1p326828813168631048576 512M Linux swap >> /dev/nvme0n1p4 1316864 315889663 314572800 150G Linux filesystem >> >> I don't want to use EFI. > > If you do NOT want to use EFI why have you set up /dev/nvme0n1p2 as an ESP > type partition? > > With just 4 partitions in total there's also the question of your choice to > use GPT instead of the legacy MBR partition table. :-/ I have 5-partitions, all together, and use fdisk -t gpt /dev//dev/nvme0n1 > >> /boot = dev/nvme0n1p2 (ext4) file system >> >> When I run: >> grub-install /dev/nvme0n1p2 >> Installing for x86_64-efi platform. >> grub-install: error: cannot find EFI directory. > > First, the handbook clearly directs to install GRUB to a disk not a partition: > > https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Bootloader > > However, you *can* install GRUB's boot code in a partition instead of a disk, > if you wish to chainload the partition's GRUB from another boot loader, e.g. > MSWindows, rEFInd, another GRUB, etc. I don't see you want to do this, from > what you have shared. You are correct here, this was my mistake, it should be (it was late at night didn't notice it) : grub-install /dev/nvme0n1 (now it works) not: grub-install /dev/nvme0n1p2 > Second, I think the error you get is caused because you have created ESP type > partition, but there is no EFI/ directory in it, which the UEFI boot protocol > requires. > > >> but there is /boot/grub > > Yes, the error you got does not complain about /boot/grub missing, but about > the absence of an "... EFI directory". > > >> Running: grub-mkconfig -o /boot/grub/grub.cfg is OK (no errors) >> >> fstab: >> /dev/nvme0n1p2 /boot ext4 > noauto,noatime1 2 >> >> The BIOS has CSM compatibly mode enable. >> When I try to boot, system can not find bootable partition. >> >> Am I suppose to put any file system on /dev/nvme0n1p1 (2Mb partition) the >> installation manual did not mention anything. > > No filesystem formatting is required for the small /dev/nvme0n1p1 BIOS boot > partition - GRUB will install its 2nd stage core image in there. > > I'd question if your boot partition should be set as ESP type in the first > place. Set it as a Linux partition, reformat it with ext2, or if you want as > ext4, mount it as /boot and then install GRUB on the disk as the handbook > instructs. Yah, I change this partition to "Linux filesystem" /dev/nvme0n1p2 6144 268287 262144 128M Linux filesystem Without reinstalling anything, it works (it was ext4).
Re: [gentoo-user] BIOS can not find boot partition
Hello, I don't want to use EFI. Then you probably should not be attempting to boot off an NVMe drive, as that is only possible if the drive has an onboard BIOS-mode boot ROM; AFAIK those are only found on some of the earliest NVMe drives. Moreover... grub-install /dev/nvme0n1p2 Installing for x86_64-efi platform. You are installing GRUB in EFI mode. My guess is that it's because you're running the command from a system that was booted in EFI mode, so grub-install picks EFI by default. For BIOS you want the 'i386-pc' platform, and you _must_ install GRUB to the block device itself (/dev/nvme0n1) And once again, whether or not you'll be able to boot from that is very much open to debate. Am I suppose to put any file system on /dev/nvme0n1p1 (2Mb partition) the installation manual did not mention anything. That partition is only there to reserve space for the initial stages of GRUB when BIOS-booting from a GPT disk. It does not need to be formatted or mounted, and as long as it has the proper flags grub-install should be able to pick it up on its own. andrea
Re: [gentoo-user] BIOS can not find boot partition
On Sunday, 24 January 2021 05:49:28 GMT the...@sys-concept.com wrote: > I'm missing something as system can not find boot device > > fdisk /dev/nvme0n1 > Disklabel type: gpt > > Device StartEndSectors Size Type > /dev/nvme0n1p1 2048 6143 4096 2M BIOS boot > /dev/nvme0n1p2 6144 268287 262144 128M EFI System > /dev/nvme0n1p326828813168631048576 512M Linux swap > /dev/nvme0n1p4 1316864 315889663 314572800 150G Linux filesystem > > I don't want to use EFI. If you do NOT want to use EFI why have you set up /dev/nvme0n1p2 as an ESP type partition? With just 4 partitions in total there's also the question of your choice to use GPT instead of the legacy MBR partition table. :-/ > /boot = dev/nvme0n1p2 (ext4) file system > > When I run: > grub-install /dev/nvme0n1p2 > Installing for x86_64-efi platform. > grub-install: error: cannot find EFI directory. First, the handbook clearly directs to install GRUB to a disk not a partition: https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Bootloader However, you *can* install GRUB's boot code in a partition instead of a disk, if you wish to chainload the partition's GRUB from another boot loader, e.g. MSWindows, rEFInd, another GRUB, etc. I don't see you want to do this, from what you have shared. Second, I think the error you get is caused because you have created ESP type partition, but there is no EFI/ directory in it, which the UEFI boot protocol requires. > but there is /boot/grub Yes, the error you got does not complain about /boot/grub missing, but about the absence of an "... EFI directory". > Running: grub-mkconfig -o /boot/grub/grub.cfg is OK (no errors) > > fstab: > /dev/nvme0n1p2/boot ext4 noauto,noatime 1 2 > > The BIOS has CSM compatibly mode enable. > When I try to boot, system can not find bootable partition. > > Am I suppose to put any file system on /dev/nvme0n1p1 (2Mb partition) the > installation manual did not mention anything. No filesystem formatting is required for the small /dev/nvme0n1p1 BIOS boot partition - GRUB will install its 2nd stage core image in there. I'd question if your boot partition should be set as ESP type in the first place. Set it as a Linux partition, reformat it with ext2, or if you want as ext4, mount it as /boot and then install GRUB on the disk as the handbook instructs. signature.asc Description: This is a digitally signed message part.
[gentoo-user] Re: pycharm-community crashed on the first start
ср, 23 дек. 2020 г. в 22:33, gevisz : > > I have just installed pycharm-community 2020.1.3 (marked stable) with > its default settings (that is with +bundled-jdk use flag) on my newly > installed Gentoo system and tried to start it using the following > command: > /opt/pycharm-community/bin/pycharm.sh > > Unfortunately, pycharm crashed on the start reporting the following error: > > # A fatal error has been detected by the Java Runtime Environment: > # > # SIGSEGV (0xb) at pc=0x, pid=26676, tid=26725 > # > # JRE version: OpenJDK Runtime Environment (11.0.7+10) (build > 11.0.7+10-b765.64) > # Java VM: OpenJDK 64-Bit Server VM (11.0.7+10-b765.64, mixed mode, > tiered, compressed oops, concurrent mark sweep gc, linux-amd64) > # Problematic frame: > # C 0x > # > # Core dump will be written. Default location: /home/gevis/core > # > # If you would like to submit a bug report, please visit: > # http://bugreport.java.com/bugreport/crash.jsp > # The crash happened outside the Java Virtual Machine in native code. > # See problematic frame for where to report the bug. > > A longer error report from /home/gevis/java_error_in_PYCHARM_26676.log > tells me nothing meaningful. :( > > I have no other Java JDK installed on my system. > > Is it a known problem? Shall I try to install pycharm with > -bundled-jdk use flag? I have just compiled pycharm-community without bundled-jdk use flag and found out that now it can start (after setting export PYCHARM_JDK=`java-config -O` Moreover, I have found out that, in https://wiki.gentoo.org/wiki/PyCharm_Community_Edition, it is stated that "There are currently no USE flags available for dev-util/pycharm-community" which is definitely not true. So, I have filed the following bug about all this: https://bugs.gentoo.org/764926
