JimD wrote:
On Sat, 01 Apr 2006 20:32:27 -0600
Jeremy Olexa [EMAIL PROTECTED] wrote:
JimD wrote:
Thanks. I wonder why TightVNC is so broken on xorg 7.0?
Help the devs and submit a bug report (if its not submitted
already) ;)
I beat you to the punch : )
Try using zebedee to both compress and encrypt (if neccessary) the vnc
connection. Provided a nice usability increase when using vnc through a
modem, though tightvnc was a little better than vnc.
BillK
On Sat, 2006-04-01 at 16:47 -0500, Jim wrote:
On Sat, 2006-04-01 at 22:29 +0200, Alexander
I wonder why gnuplot needs xemacs. I did equery d xemacs and got:
[ Searching for packages depending on xemacs... ]
sci-visualization/gnuplot-4.0-r1
app-xemacs/xemacs-base-1.75
app-xemacs/xemacs-ispell-1.24
app-xemacs/ada-1.13
app-xemacs/apel-1.26
app-xemacs/fsf-compat-1.12
app-xemacs/leim-1.20
Hi,
Nobody has problem similar to mine?
Everybody have extremely smooth, well-working printing system with amd64? :)
Please give me some tipps :)
Regards,
István
Istvan Pongracz wrote:
Hi,
I have a problem on my amd64 system.
I put a fresh x64 gentoo install to an amd64 machine about a
Hi,
I tried to install gentoo on my notebook using x86-minimal-2006.0.iso.
I defined eth0 as usuall, but I could not ping to any IP inside/outside
my lan...
Then I went back to boot-messages and found out there are eth0 and eth1
detected! Very probably my 10/100/1000Mbit ethernet is eth1,
# equery d xorg-x11
[ Searching for packages depending on xorg-x11... ]
kde-base/kwin-3.5.2-r1
Is this a bug? According to
http://www.gentoo.org/proj/en/desktop/x/x11/porting-modular-x-howto.xml
no package is allowed to depend on a meta package, which I assume
xorg-x11 is. I am running kwin
On Sat, 2006-03-18 at 10:47 +1300, Nick Rout wrote:
On Thu, 16 Mar 2006 09:36:12 +
Unknown [EMAIL PROTECTED] wrote:
/etc/init.d/net.lo start
ip link, shows that lo interface is there
Nick (running out of ideas)
OK.
does this happen for all users? or just you? (don't
On Thu, 2006-03-16 at 13:41 +0100, Benno Schulenberg wrote:
Unknown wrote:
On Wed, 2006-03-15 at 22:27 +0100, Benno Schulenberg wrote:
Unknown wrote:
gnome-session shows mistakes,
right now it showed smth like: gnomeui-warning: while
connecting manager: authentication rejected,
On Sunday 02 April 2006 05:15, JimD wrote:
I have it up and running with no issues. Maybe try to go through the
HOWTO again? What I usually do is look at the startup script and try
to make a test script to get it running. Here is an example for
starting courier-imap. Just copy it to a file
# equery d xorg-x11
[ Searching for packages depending on xorg-x11... ]
media-video/kaffeine-0.7.1
kde-base/kwin-3.5.2-r1
Kaffeine too..
--
Chris
--
gentoo-user@gentoo.org mailing list
On 01/04/06, Kurt Guenther [EMAIL PROTECTED] wrote:
Kurt Guenther wrote:
I'm having problems with Xinerama after upgrading to xorg 7.0 or modular
X.
It appears that X thinks it's using Xinerama. I can move my mouse off
the screen and it thinks it has all the pixels. Just no output to
Bryan Whitehead wrote:
He said it could ping... I dunno... seems he just needs to figure out
how he wants to transfer files.
Did the OP try something like:
===
scp -p -v -c blowfish /local_box_path_to_file
[EMAIL PROTECTED]:/mnt/hda5/
===
The above
In Linux you have the system clock and the hardware clock. The system
clock is the clock of your motherboard that can be set in the bios
setup.
To set the system clock, the command is:
date mmddhhmm
To set the hardware clock, use the command:
hwclock --set --date=mm/dd/ hh:mm:ss
To
Sorry... there is a mistake in my message.
system clock is the clock of your motherboard
should be
hardware clock is the clock of your motherboard
Sorry for the mistake. I hope I did not confused you.
On 4/2/06, Technomancer [EMAIL PROTECTED] wrote:
In Linux you have the system clock and the
On Sun, 2006-04-02 at 15:05 +0200, Bo Andresen wrote:
This script does start it up successfully. Still the initscript doesn't. I
have tested that all the variables are set to the same things in the
initscript simply by printing them with echo and they are.
Hi all
to-day I re-compiled the kernel to enable PCSPKR and USB printer.
1 - the system bell works but as root only. Likely a matter of permissions,
but I do not know where to look for;
2 - the printer is correctly detected, but when I try to set it up using cups
I see no printer modules. The
What brand and model # is your printer?
--
gentoo-user@gentoo.org mailing list
Alle 16:55, domenica 2 aprile 2006, david ha scritto:
What brand and model # is your printer?
HP PSC 1410
--
gentoo-user@gentoo.org mailing list
On Saturday 01 April 2006 23:47, Jim wrote:
On Sat, 2006-04-01 at 22:29 +0200, Alexander Skwar wrote:
[EMAIL PROTECTED] /var/db/pkg $ epm -qf `which xmkmf `
imake-1.0.1-r1
Please file a bug against tightvnc, as it's missing
a dependency.
Will do.
BTW: Why use tightvnc at all?
On Sun, 2006-04-02 at 17:17 +0200, [EMAIL PROTECTED] wrote:
Alle 16:55, domenica 2 aprile 2006, david ha scritto:
What brand and model # is your printer?
HP PSC 1410
Then emerge hplip and they you need to start hplip and cups.
sudo /etc/init.d/hplip start
sudo /etc/init.d/cupsd start
sudo
Hi,
I am looking for an applikation to cut videos I recorded with
a Siemens m740 dvbt receiver.
I tried dvbcut (seqfault) and avidemux (does not start...).
And the applikation should not be a Java based one.
Thank you very much for any help in advance !
Keep hacking!
mcc
--
Hi folks,
Kernel is 2.6.14-r3. I am using splash and, probably ore important, a
background picture in a framebuffer on every virtual text console.
A long download is running on one text console (ppp with an analogue modem). I
am in X and switch back text console to check on the download.
Each
On Sun, Apr 02, 2006 at 04:26:00PM +0200, Rick van Hattem wrote:
On Saturday 01 April 2006 23:47, Jim wrote:
On Sat, 2006-04-01 at 22:29 +0200, Alexander Skwar wrote:
[EMAIL PROTECTED] /var/db/pkg $ epm -qf `which xmkmf `
imake-1.0.1-r1
Please file a bug against tightvnc, as it's
Jim wrote:
On Sun, 2006-04-02 at 17:17 +0200, [EMAIL PROTECTED] wrote:
Alle 16:55, domenica 2 aprile 2006, david ha scritto:
What brand and model # is your printer?
HP PSC 1410
Then emerge hplip and they you need to start hplip and cups.
sudo /etc/init.d/hplip start
sudo
On Sunday 02 April 2006 18:31, Uwe Thiem wrote:
Hi folks,
Kernel is 2.6.14-r3. I am using splash and, probably ore important, a
background picture in a framebuffer on every virtual text console.
A long download is running on one text console (ppp with an analogue
modem). I am in X and
On Sunday 02 April 2006 02:04, kashani wrote:
I've made my problem go away, but I'm a bit curious about why it was
happening.
I've got nine or so Dell 1850's with 2 x 2GB chips. When I compile
gentoo-source 2.6.15-r1 (and 2.6.14-r5) with support for 4GB I see only
3GB. 1GB lowmem and
cut
I thought you had to have ppds use flage in /etc/make.conf in order for
the ppd files to be generated (compiled?) No?
That was the question! Should I?
And after?
Bye
emilio
--
gentoo-user@gentoo.org mailing list
Alle 17:54, domenica 2 aprile 2006, Jim ha scritto:
On Sun, 2006-04-02 at 17:17 +0200, [EMAIL PROTECTED] wrote:
Alle 16:55, domenica 2 aprile 2006, david ha scritto:
What brand and model # is your printer?
HP PSC 1410
Then emerge hplip and they you need to start hplip and cups.
sudo
Try adding the following to /etc/conf.d/net:
postdown() {
test ${IFACE} = eth0 /sbin/ifconfig eth0 0.0.0.0 up
return 0
}
Thank you. That was a big help, but somehow disappointing.
I would rather like, if ifplugd would automatically do the ifconfig up
so that no
Hello once more.
I was good this time and did look through the documentation. In order
to get the beautification on Gentoo I wanted (the nice graphics
during the install and stuff) I researched it and installed
splashutils. However, installation wasn't enough. There's a way to
activate it. I
On 4/2/06, Jarry [EMAIL PROTECTED] wrote:
But what is eht0, wifi? Can I somehow change network detection so that
eth0 is wired-ethernet, and eth1 that other network (probably wifi)???
Most likely eth0 is your wifi card. You can write udev rules to set
whatever device names you want. For
No, the interface needs to be up for mii stuff to work.
Well, the proper sollution is: set AUTO=yes in /etc/conf.d/ifplugd,
and ifplugd sets the interface to up automatically.
signature.asc
Description: OpenPGP digital signature
[EMAIL PROTECTED] wrote:
cut
I thought you had to have ppds use flage in /etc/make.conf in order for
the ppd files to be generated (compiled?) No?
That was the question! Should I?
And after?
Bye
emilio
After emerging hplip you will notice info re: ppds. If I'm not mistaken,
Ted Ozolins wrote:
After emerging hplip you will notice info re: ppds. If I'm not mistaken,
emerging hplip without the ppds USE flag will not create the ppd files
needed. Once you emerge hplip with the ppds USE flag the ppd files will
be created. Then when you go to set-up your printer in CUPS,
Emerging seahorse fails with following error:
...
mkdir -p /usr/share/mime/packages/
update-mime-database /usr/share/mime/
update-mime-database: I don't have write permission on /usr/share/mime.
Try rerunning me as root.
...
!!! ERROR: app-crypt/seahorse-0.7.8 failed.
!!! Function
http://gentoo-wiki.com/HOWTO_fbsplash
--
Bo Andresen
--
gentoo-user@gentoo.org mailing list
On Saturday 01 April 2006 19:22, Jeremy Olexa wrote:
Peter Kelly wrote:
Now, it shows that every service is [broken], but the advice to remove
the broken service using rc-update -d (service) and add it in again does
nothing. Everything is still [broken].
Anyone seen this, and have an
A few days ago, I asked how to do it. I stumbled across the answer
whilst browsing Google on an entirely different topic. The answer is to
add the parameters noexec=on and noexec32=on to the boot line. I've
added it via append lines in /etc/lilo.conf
#
# Linux bootable partition config
And the applikation should not be a Java based one.
I hope you know what you are missing, because IMHO ProjectX (which is written
in Java) is one of the best tools at the moment for the purpose of video
cutting ...
BTW, it is not in portage, AFAIK ...
brgds, Marc
Marc Redmann wrote:
BTW, it is not in portage, AFAIK ...
Sorry I cannot answer the original question but I would just like to add
this:
%% eix projectx
* media-video/projectx
Available versions: ~0.90.3.00 ~0.90.3.01
Installed: none
Homepage:
On Sun, 02 Apr 2006 18:29:00 +0200 (CEST)
Meino Christian Cramer wrote:
Hi,
I am looking for an applikation to cut videos I recorded with
a Siemens m740 dvbt receiver.
I tried dvbcut (seqfault) and avidemux (does not start...).
the binary for avidemux is actually called avidemux2
On Sun, 02 Apr 2006 18:29:00 +0200 (CEST)
Meino Christian Cramer wrote:
Hi,
I am looking for an applikation to cut videos I recorded with
a Siemens m740 dvbt receiver.
I tried dvbcut (seqfault) and avidemux (does not start...).
And the applikation should not be a Java based one.
--- Bryan Whitehead [EMAIL PROTECTED] wrote:
What do you mean by xover? FTP? SCP? NFS? Coda?
HTTP?
xover==crossover.
quoteftp didn't work either/unquote
On Sat, 1 Apr 2006, maxim wexler wrote:
Hi everybody,
Anybody got this working between two PCs and can
tell
me how to edit
thank you for your help, everything is running perfect now :)
it's easy if you know the difference between system and hwclock, but
confusing if you only now about the date program. it would be nice if
there would be a link to hwclock in the manpage of date, like it is the
other way round. but
On Mon, 3 Apr 2006 01:02:53 +0200
Marc Redmann [EMAIL PROTECTED] wrote:
And the applikation should not be a Java based one.
I hope you know what you are missing, because IMHO ProjectX (which is
written in Java) is one of the best tools at the moment for the
purpose of video cutting ...
Jeremy Olexa wrote:
pat wrote:
Hi all,
is there someone who has experience with *subj* ??? One of my friends
has this ntb and is not able to install linux on it (this is problem
with irgpoll, but setting this param to kernel doewn't work).
Thanks to all
Pat
P.S. IBM, P3/750MHz, 20GB hdd
Hi,
i would like to shape the traffic of my DSL-connection, but somehow i
never really understood the machanisms that linux offers. All the
scripts i wrote were simply worthless somehow, because they didn't
really improve anything.
Is there any application or script that is easy to configure and
From: Nick Rout [EMAIL PROTECTED]
Subject: Re: [gentoo-user] OT: Application for video cutting ?
Date: Mon, 03 Apr 2006 11:24:04 +1200
Avidemux failed to compile (may be my own problem, cause I installed
mplayer/ffmpeg from CVS...):
make[3]: Entering directory
From: Nick Rout [EMAIL PROTECTED]
Subject: Re: [gentoo-user] OT: Application for video cutting ?
Date: Mon, 03 Apr 2006 11:28:47 +1200
Hi Nick,
thanks for your reply ! :O)
I dont like to install binary only blocks (available as such only)
onto my system regardless whether it is payware or
I am trying to run gdmsetup and getting can't find display type errors.
Here is what happened when I try to run it from an xterm:
[EMAIL PROTECTED] ~ $ sux
Password:
zebedee robert # gdmsetup
(gdmsetup:6618): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected,
thanks richard.
is it safe to have compiled half a system with gcc 3.3 ubt to be compiling new packages with 3.4?On 4/2/06, Richard Fish
[EMAIL PROTECTED] wrote:On 4/1/06, Leigh Stewart
[EMAIL PROTECTED] wrote: I just tried to install skype, it wont start, and in the logs it tells me it cant
On 4/2/06, Leigh Stewart [EMAIL PROTECTED] wrote:
thanks richard.
is it safe to have compiled half a system with gcc 3.3 ubt to be compiling
new packages with 3.4?
From what I read, if you have half a package using gcc3.3 and the
other half 3.4 or something, that won't work. However, I
could someone tell me where i can configure logging for portage? i.e. i
would like emerge.log to be longer, and i would rather portage logging
was all placed under a directory in /var/log
thanks
On Monday 03 April 2006 12:22 am, Leigh Stewart wrote:
could someone tell me where i can configure logging for portage? i.e. i
would like emerge.log to be longer, and i would rather portage logging was
all placed under a directory in /var/log
thanks
well, I can answer the location question
Leigh Stewart wrote:
could someone tell me where i can configure logging for portage? i.e. i
would like emerge.log to be longer, and i would rather portage logging
was all placed under a directory in /var/log
thanks
mkdir /var/log/portage
echo PORT_LOGDIR=/var/log/portage /etc/make.conf
On Mon, Apr 03, 2006 at 12:22:40AM -0400, Penguin Lover Leigh Stewart squawked:
could someone tell me where i can configure logging for portage? i.e. i
would like emerge.log to be longer, and i would rather portage logging was
all placed under a directory in /var/log
Go into /etc/make.conf and
56 matches
Mail list logo
