I don't see what the big deal is - you are choosing to do everything
manually by running gentoo and compiling your own kernel. If you don't
like having to learn things like this why not use Ubuntu or Fedora?
On Nov 12, 2007 8:35 PM, Walter Dnes <[EMAIL PROTECTED]> wrote:
> On Sat, Nov 10, 2007 at
On Fri, 02 Nov 2007 15:17:59 +, Joost Roeleveld wrote:
>> 2.) As it stands, it's going to take 862 slices to backup this data
>> without compression? I asked for slices of 690M, why is it only
>> showing as 106M for this particular slice?
>
> Not sure, am guessing it's not going through the
On (12/11/07 21:49) James wrote:
> Alex Schuster wonkology.org> writes:
>
> > "emerge -a --depclean"
>
> and a little bit of manual removals, did the trick.
>
>
> thx,
>
> James
>
>
>
> --
> [EMAIL PROTECTED] mailing list
>
Hi,
When running 'revdep-rebuild' you could use "-i" option to
On Sat, Nov 10, 2007 at 10:53:52AM -0600, Michael Sullivan wrote
> On Sat, 2007-11-10 at 15:40 +0200, Daniel Iliev wrote:
> >
> > I believe your problem comes from:
> >
> > # CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
> >
> > Build this module and try again.
> >
> This option isn't even availab
--- Dan Farrell <[EMAIL PROTECTED]> wrote:
> On Mon, 12 Nov 2007 15:27:55 -0800 (PST)
> maxim wexler <[EMAIL PROTECTED]> wrote:
>
> > >
> > > rootnoverify (hd1,0)
> > > map (hd1)(hd0)
> >
> > Error 11: Unrecognized device string
> >
> > Press any key to continue...
> >
> >
> >
> >
> >
On Mon, 12 Nov 2007 15:27:55 -0800 (PST)
maxim wexler <[EMAIL PROTECTED]> wrote:
> >
> > rootnoverify (hd1,0)
> > map (hd1)(hd0)
>
> Error 11: Unrecognized device string
>
> Press any key to continue...
>
>
>
>
>
> _
I just switched from DSL to cable and I'm noticing a significant delay
when using Skype, even when nothing else is happening on my network.
Has anyone else noticed this and had success "fixing" it? I'm using a
Gentoo router so I can try just about anything.
- Grant
--
[EMAIL PROTECTED] mailing l
Hello,
After a successful upgrade from profile 2006.1 to 2007.0, I decided to
unmerge some unused packages from world and accidentally had glibc on
the emerge command line from a cut and paste operation.
glibc was unmerged and now I can't use common shell commands such as ls
or cp to list and co
>
> rootnoverify (hd1,0)
> map (hd1)(hd0)
Error 11: Unrecognized device string
Press any key to continue...
Get easy, one-click access to your favorites.
Make Yahoo! your homepage.
http://www.yahoo.c
On Mon, 12 Nov 2007 13:25:43 -0800 (PST)
maxim wexler <[EMAIL PROTECTED]> wrote:
> I've tried all the possibilities.
Except the working one. Don't give up!
I don't mean to discount your reply but I am worried I expressed myself
poorly. I think your configuration should look like:
rootnoverif
Uwe Thiem wrote:
Is it simply not supported yet, or does anybody know a trick?
I know from experience (having spent the last few months struggling with
a VIA-based laptop) that VIA chipsets are just not worth the pain. :(
However, the trick in your case may be to load the right driver. If
On Mon, Nov 12, 2007 at 03:09:44PM -0600, Penguin Lover Michael Sullivan
squawked:
> Alpha: rgba(0,255,0,1)#00FF
> Background color: black
> Transparent color: rgba(0,255,0,1)
> It claims that the background is black, but the gif doesn't show a
> background at all, and the BMP sho
Alex Schuster wonkology.org> writes:
> "emerge -a --depclean"
and a little bit of manual removals, did the trick.
thx,
James
--
[EMAIL PROTECTED] mailing list
Michael Sullivan writes:
> The background of the image looks green to me (0, 255, 0), but identify
> claims it's white. Is there a way I can know for sure without having to
> go through all the RGB codes? The convert created BMP's won't open in
> gimp
Strange. I suggest asking the experts o
> In your grub.conf, you say the root is on (hd0,0)
> but then remap (hd1)
> as (hd0). Whereas the root partition for windows
> boot in my case is
> the first hard drive listed after 'map', yours is
> the second I suggest
> you reverse this.
As I stated before, I've tried all the possibilitie
On Mon, 2007-11-12 at 15:46 -0500, Willie Wong wrote:
> On Mon, Nov 12, 2007 at 02:17:32PM -0600, Michael Sullivan wrote:
> > The background of the image looks green to me (0, 255, 0), but identify
> > claims it's white. Is there a way I can know for sure without having to
> > go through all the R
On Mon, Nov 12, 2007 at 02:17:32PM -0600, Michael Sullivan wrote:
> The background of the image looks green to me (0, 255, 0), but identify
> claims it's white. Is there a way I can know for sure without having to
> go through all the RGB codes? The convert created BMP's won't open in
> gimp
My wife and I are working on a programming project together. I have a
number of transparent .gif files that I've converted to BMP with
imagemagick's convert command. I'm trying to discover what their
background color is so that I can make the backgrounds transparent once
again. I've discovered t
James writes:
> Upon a routine upgrade, I followed up with revdep-rebuild -p.
> The problem is the system wants to rebuild versions of packages
> that are very old. 'equery depengs reveals that nothing
> is dependent of the first few packages.
[...]
>
> I'm open to suggestions as to how to clean
Hello,
Upon a routine upgrade, I followed up with revdep-rebuild -p.
The problem is the system wants to rebuild versions of packages
that are very old. 'equery depengs reveals that nothing
is dependent of the first few packages.
I'm open to suggestions as to how to clean up this mess:
Here is t
On Mon, 12 Nov 2007 07:42:58 +
Mick <[EMAIL PROTECTED]> wrote:
> It should say something like "You can make a manual install
> > now using Gentoo handbook, or you may try an automated installer by
> > running "installer" now, but beware its experimental, and doesn't
> > always work". Such mess
On Mon, 12 Nov 2007 09:52:49 -0800 (PST)
maxim wexler <[EMAIL PROTECTED]> wrote:
> grub.conf:
>
> #XP
> title=XP
> rootnoverify (hd0,0)
> map (hd1)(hd0)
> makeactive
> chainloader +1
> boot
>
> (I used one 'map' command following Dan Farrell's
> model but using two made no difference)
not
On Sun, Nov 11, 2007 at 09:25:44PM +0100, Penguin Lover Florian Philipp
squawked:
> Can anyone confirm that it is not possible to transcode ogg-flac files
> to ogg-vorbis although the necessary use flags are set (vorbis-tools
> +flac; flac +ogg) and the man page says it's possible?
Yes, I just tr
> My guess is that you have incompatible jumper
> settings on the back of the
> drives. Check these and make sure that they reflect
> what the BIOS sees.
> Also, check your /boot/grub/device.map for
> consistency. Then use tab
> completion from the grub prompt to find devices and
> bootable
Hello!
I'm developing some kind of headless bluetooth terminal, based on Gentoo
Linux.
Currently it's casual x86 pc with 2 usb bluetooth dongles.
Dongles have been plugged to usb ports and not being removed.
After sturtap, system can't see one (randomly) of them. The second one are
turned off and
On 12 November 2007, David Sveningsson wrote:
> Uwe Thiem skrev:
> > Hi folks,
> >
> > subjects says it all actually. I have a new motherboard with the VIA
> > VT8237R Plus chip on it. Tried kernel 2.6.22-r5 and 2.6.23-r1 but
> > couldn't get sound to work. All the relevant modules are loaded I thi
Uwe Thiem skrev:
> Hi folks,
>
> subjects says it all actually. I have a new motherboard with the VIA VT8237R
> Plus chip on it. Tried kernel 2.6.22-r5 and 2.6.23-r1 but couldn't get sound
> to work. All the relevant modules are loaded I think:
> uwix src # lsmod | grep snd
> snd_pcm_oss
Hi folks,
subjects says it all actually. I have a new motherboard with the VIA VT8237R
Plus chip on it. Tried kernel 2.6.22-r5 and 2.6.23-r1 but couldn't get sound
to work. All the relevant modules are loaded I think:
uwix src # lsmod | grep snd
snd_pcm_oss35648 0
snd_mixer_oss
Michael Sullivan wrote:
> I ran revdep-rebuild about a month ago, It asked to remerge gcc-4.1.2.
> I allowed it. Every revdep-rebuild I've run since then has asked to
> build it again. How do I get out of this loop?
https://bugs.gentoo.org/show_bug.cgi?id=125728#c29
Regards
mks
--
[EMAIL PR
I ran revdep-rebuild about a month ago, It asked to remerge gcc-4.1.2.
I allowed it. Every revdep-rebuild I've run since then has asked to
build it again. How do I get out of this loop? Here's my
revdep-rebuild -pv:
camille ~ # revdep-rebuild -pv
Configuring search environment for revdep-rebui
On Monday 12 November 2007, Peter Alfredsen wrote:
> On Monday 12 November 2007, Fabio wrote:
> > Thank you very much Peter. This is my ethernet card:
> >
> > 82557/8/9 Ethernet pro 100
>
> There are two ethernet cards in your machine, as evidenced by the error
> message "eth1: PHY reset until link
On Monday 12 November 2007, Fabio wrote:
> Thank you very much Peter. This is my ethernet card:
>
> 82557/8/9 Ethernet pro 100
There are two ethernet cards in your machine, as evidenced by the error
message "eth1: PHY reset until link up". Enumeration starts at eth0, then
eth1, etc. What is the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
maxim wexler wrote:
> Previously I had a problem with hard drive that turned out was a
> faulty IDE controller, not the drive, not the cable.
>
> Now I can't use /dev/hdb but /dev/hdc is OK. So my set up is
> /dev/hda(WinXP) and /dev/hdc(gentoo), ie, W
Thank you very much Peter. This is my ethernet card:
82557/8/9 Ethernet pro 100
I downloaded the latest cd minimal installation image for amd64.
So what do you suggest me to do?
thanks!
Fabio
Peter Alfredsen wrote:
On Sunday 11 November 2007, Fabio wrote:
I want to install gentoo from a m
On Monday 12 November 2007, Miernik wrote:
> Dan Farrell <[EMAIL PROTECTED]> wrote:
> > I _highly_ recommend using a the manual install method from the gentoo
> > handbook. It's valuable for many reasons, not the least of which
> > being its flexibility.
>
> OK, now I know, I've done it with the m
On Sunday 11 November 2007, maxim wexler wrote:
> Hi group,
>
> Previously I had a problem with hard drive that turned
> out was a faulty IDE controller, not the drive, not
> the cable.
>
> Now I can't use /dev/hdb but /dev/hdc is OK. So my set
> up is /dev/hda(WinXP) and /dev/hdc(gentoo), ie, WinX
36 matches
Mail list logo
