binary packages with python 3.11 support as it makes upgrades faster for
those users that couldn't bump to python 3.12. However, while we can ask,
the cost-benefit ratio might not justify the additional resources needed to
maintain them and, quite frankly, you and I have no voice in that decision.
Best regards,
Marco.
tem to python 3.12? As a user, this would feel really wrong.
Best regards,
Marco.
[1]
https://forums.gentoo.org/viewtopic-p-8828818.html?sid=d9a82c4e691be29249059bcb9d86a8e1
ox as the one you set
up Postfix on.
The man page describes it as a compatibility interface for sendmail but I'm
not sure if there's an expliticly Postfix way to do this.
-Marco
signature.asc
Description: This is a digitally signed message part.
ve used
for years is ESP at /boot, containing systemd-boot, kernel, initramfs and so
on, and that's it (excluding of course / and other actual system partitions).
-Marco
signature.asc
Description: This is a digitally signed message part.
the client:
> # rpcdebug -m nfs -s all
On the server:
> # rpcdebug -m nfsd -s all
On both sides, if the others don't give useful info, this is for the lower
level protocol:
> # rpcdebug -m rpc -s all
Then, try running the command again. It will spew a lot of info but hopefully
yo
le jobs are running, check /var/log/emerge-fetch.log. And
I doubt this has anything to do with it being stuck (unless your disk is
abysmally slow and it's stuck on IO, but most likely not).
-Marco
signature.asc
Description: This is a digitally signed message part.
gt; app-text/master-pdf-editor: removed 4.3.82 as sources are no longer
> available.
-Marco
signature.asc
Description: This is a digitally signed message part.
lling from your repo, in which
case repeated force pushes would cause issues when they try to pull. I
wasn't sure if you wanted to actually have the repo public or if this
was just to make updating for you easier.
> > I hope this helps :P
>
> It did indeed. Thanks!
Glad to be of
de anyway). Personally I'd
make the patches against the vanilla sources.
-Marco
signature.asc
Description: This is a digitally signed message part.
is currently rebased on).
That of course you don't have to then force push.
I hope this helps :P
-Marco
signature.asc
Description: This is a digitally signed message part.
repository to directly add support to more packages.
-Marco
signature.asc
Description: This is a digitally signed message part.
On Saturday, 18 September 2021 20.39.45 CEST Alan Mackenzie wrote:
> I used to have a utility pm-suspend which would suspend the current
> state of the machine to RAM (or, maybe to the swap partition) and shut
> the machine down to a resting state. A keypress or mouse movement
> would restore full
ndle that itself.
That's what I would suggest if what I wrote above doesn't work. I
haven't ever encountered this issue myself yet though despite
extensively using KDE packages, so I'm not sure what's going wrong here.
-Marco
signature.asc
Description: This is a digitally signed message part.
2020-05-06 16:25 GMT+02:00, Mark Knecht :
> On Wed, May 6, 2020 at 2:39 AM marco restelli wrote:
>
>> 2020-05-06 11:29 GMT+02:00, marco restelli :
>> > Hi all,
>> >this is a bit off topic, but probably is not an unknown problem for
>> > many on the list.
2020-05-06 11:29 GMT+02:00, marco restelli :
> Hi all,
>this is a bit off topic, but probably is not an unknown problem for
> many on the list.
>
> I am a long time gentoo user and I occasionally work on an Ubuntu
> system. I wonder
> whether there is an Ubuntu equivalent
wants them and those that are only there as
a dependency.
Thank you
Marco
uses "busybox findfs" to
>> translate the UUID into a device name. Is this correct?
>>
>
> I suppose that is one way it could be done, but of course it could be
> implemented in other ways. As far as I can tell Dracut does not use
> busybox findfs.
OK, yes. Indeed I was looking at the init used by genkernel.
Marco
2017-02-13 12:47 GMT+01:00, Johannes Rosenberger :
> On 13.02.2017 12:34, Rich Freeman wrote:
>> On Mon, Feb 13, 2017 at 5:53 AM, marco restelli
>> wrote:
>>> Could you suggest any reference about how an initramfs can help making
>>> it easier to identify the c
2017-02-13 12:34 GMT+01:00, Rich Freeman :
> On Mon, Feb 13, 2017 at 5:53 AM, marco restelli
> wrote:
>>
>> Could you suggest any reference about how an initramfs can help making
>> it easier to identify the correct root filesystem? Does this
>> functionality overla
2017-02-10 13:35 GMT+01:00, Rich Freeman :
> On Fri, Feb 10, 2017 at 6:58 AM, marco restelli
> wrote:
>> Hi all,
>>I am trying to understand a bit initramfs and genkernel and I have
>> few (basic) questions.
>
>> - how does genkernel decide which modules to p
- I hope somebody
can help me a bit!
Thank you,
Marco
2017-02-06 21:44 GMT+01:00, marco restelli :
> Hi all,
>I would like to build a bootable USB which behaves as a normal
> installation (saving files, updates etc.) and which is reasonably
> portable across various computers. I am following
>
> https://wi
providing additional details, if I knew what would
be useful.
Thank you!
Marco
Thanks
Ciao
Marco
On Fri, 24 Jun 2016 08:17:26 +
"Luigi 'Comio' Mantellini" wrote:
> Hi,
>
> you can find the answer here:
>
> https://bugs.gentoo.org/show_bug.cgi?id=487384
>
> ciao
>
> luigi
>
> UE is us. We are UE.
>
orage drivers may still sync.
why changig default to -n so no syncing ?
This seems a bad default .
Any reasons for this change ?
I didn't find any bugs o other doc.
Best regards
Marco
epo i can sync each repo when i want and i can
enable/disable one of them to switch from/to production/devel .
I don't know how to do that directly with git.
Best regards
Marco
On Thu, 16 Jun 2016 11:46:12 -0700
Bryan Gardiner wrote:
> On Thu, 16 Jun 2016 17:52:26 +0200
> ma...@
Hi,
i have a layman git profile to store my stuff.
Is possible to force layman -S to sync a specific branch ?
Ok ,
/var/lib/portage/config keeps the hashes of the original modified files.
Thanks
Marco
On Wed, 15 Jun 2016 17:14:01 +0100
Neil Bothwick wrote:
> On Wed, 15 Jun 2016 18:07:21 +0200, ma...@nucleus.it wrote:
>
> > then i change parameters in /etc/dhcp/dhcpd.conf
> > and
-misc/dhcp-4.3.4::gentoo [4.3.3_p1::gentoo]
but when the update finished i don't have any etc-update to do .
Why emerge do not create new ._cfg_dhcpd.conf and ._cfg_dhcpd ?
best regards
Marco
Sorry, the subject in my previous message was wrong.
Marco
2015-04-28 15:53 GMT+0200, marco restelli :
> Hi all,
>I am trying to install dev-lang/gdl-0.9.4 but I see the following
> error:
>
>
> -- Could NOT find PLPLOT (missing: PLPLOT_LIBRARIES)
> CMake Error
- tk : Add support for Tk GUI toolkit
+ + truetype : Add support for FreeType and/or FreeType2 fonts
- - wxwidgets: Add support for wxWidgets/wxGTK GUI toolkit
Does anybody have a suggestion?
Thank you,
Marco
The warning disappear if i rebuild dev-lang/php-5.3.29 .
The question is:
why the mysql update dind't triggered the rebuild for
dev-lang/php-5.3.29 ?
Thanks Marco
Hi ,
i know that maybe this question was asked many many times :) .
Openrc has a compatibility for run, add/delete to runlevel etc ,
sysvinit init script or i have to rewrite the scripts or maybe use a
wrapper ?
Thanks Marco
Hi,
is it possible to sign a binary package to prevent it to be
compromised ?
If yes how can i check the signature from the package downloaded by
PORTAGE_BINHOST ?
Thanks :)
oreg Almeida
>
>
If by "serial" you mean UUID I personally use "ls -l /dev/disk/by-uuid/"
Marco Bonfiglio
up2l can do exactly what you want:
http://backup2l.sourceforge.net/
HTH!
--
Marco
.
(Now I've got to find out what other impacts this "Baselayout and
OpenRC Migration Guide" causes...)
Thanks for your tips!
--
Regards,
Marco
On Mon, Jan 11, 2010 at 10:48 AM, Mick wrote:
> 2010/1/10 Ngoc Nguyen Bao :
>>
>>
>> On Mon, Jan 11,
://www.gentoo.org/doc/en/fluxbox-config.xml
Killing X and then startx as user (non-root) I get into fluxbox...
Thanks in advance for your tips!
--
Regards,
Marco
On Tue, Oct 6, 2009 at 8:49 PM, Volker Armin Hemmann
wrote:
> On Dienstag 06 Oktober 2009, Grant Edwards wrote:
>> On 2009-10-06, Marco wrote:
[...]
> there is a FAT warning. Maybe people should start reading the warnings and
> infos instead of panicing
I usully tend to read af
On Tue, Oct 6, 2009 at 5:17 PM, Marco wrote:
> Hi all,
[...]
Problem solved! Thanks for all your tips and suggestions! Now back to
preparation of my job-interview tomorrow...
--
Best regards,
Marco
On Tue, Oct 6, 2009 at 6:51 PM, wrote:
> Marco [09-10-06 18:44]:
>> On Tue, Oct 6, 2009 at 4:26 PM, Dale wrote:
>> > Marco wrote:
>> [...]
>> > What happens if you emerge xorg-server with hal disabled?
>>
>> Cannot try this since I am not able to do
On Tue, Oct 6, 2009 at 7:04 PM, Kenneth Prugh wrote:
>> Two questions:
>> - Since Xorg is in the default runlevel, how can I boot into gentoo
>> without starting X (boot prompt option)?
>
> Ever notice the "press I for interactive mode" during init? That's how
> you can stop it from launching X.
>
On Tue, Oct 6, 2009 at 7:09 PM, Albert Hopkins wrote:
> On Tue, 2009-10-06 at 16:24 +, Grant Edwards wrote:
>> That seems to happen to me regularly. One might think that the
>> xorg-server ebuild should know that xf86-input-* needs to be
>> rebuilt as well, but it doesn't seem to work that wa
On Tue, Oct 6, 2009 at 4:26 PM, Dale wrote:
> Marco wrote:
[...]
> What happens if you emerge xorg-server with hal disabled?
Cannot try this since I am not able to do anything as long as I am not
able to boot in to text-mode only... X is in default runlevel.
--
Regards,
Marco
On Tue, Oct 6, 2009 at 4:24 PM, Grant Edwards wrote:
> On 2009-10-06, Marco wrote:
>
>> after emerge --sync && emerge --update world --deep my
>> keyboard (in X) does not work anymore.
>
> I'm betting you need to re-emerge x11-drivers/xf86-input-keyboard
&
On Tue, Oct 6, 2009 at 3:56 PM, Neil Bothwick wrote:
> On Tue, 6 Oct 2009 15:17:12 +0000, Marco wrote:
>
>> after emerge --sync && emerge --update world --deep my keyboard (in X)
>> does not work anymore. Since I am switching to slim after boot, I
>> cannot even c
ite this email.
Please let me know what information you need else (logs, etc.)
Any tips, hints and suggestions on how to solve my problem highly appreciated!
--
Best regards,
Marco
On Thu, Sep 24, 2009 at 12:33 PM, Volker Armin Hemmann
wrote:
> On Donnerstag 24 September 2009, Marco wrote:
>> On Thu, Sep 24, 2009 at 12:08 PM, Volker Armin Hemmann
>>
>> wrote:
>> > On Donnerstag 24 September 2009, Marco wrote:
>>
>> [...]
>>
On Thu, Sep 24, 2009 at 12:08 PM, Volker Armin Hemmann
wrote:
> On Donnerstag 24 September 2009, Marco wrote:
[...]
> just install the qt4 set. Meta packages are being phased out.
Not sure if I understand what you mean. I thought sets only exist for
world and system?
> Or unmask
Hi all
I want to install QT4 for development. Since the QT4 meta ebuild is
masked, I am not sure what split packages are needed.
http://dev.gentoo.org/~yngwin/qt4-split-ebuilds.xml only tells me what
to install for applications depending on QT4.
Thanks for your help!
--
Regards,
Marco
Hi Mike,
Thanks for your very detailed description and explanation!
On Wed, Sep 9, 2009 at 12:30 PM, Mike Kazantsev wrote:
> On Tue, 8 Sep 2009 11:21:12 +0200
> Marco wrote:
[...]
> ESSIV, on the other hand, uses the hash of these counters with the key
> itself to salt IV, so it
relation
between key size and block size of the file system in terms of data
security?
Thanks for your tips and suggestions!
--
Regards,
Marco
riced refill cartridges
- Price up to ~ 180 US$
I am especially interested in your experience to get it working under Linux.
Thanks for your tips!
--
Best regards,
Marco
Maybe this thread could be helpful as well:
http://marc.info/?l=gentoo-user&m=124058693215810&w=2
--
Regards,
Marco
On Thu, Jul 16, 2009 at 10:41 AM, Marco wrote:
> Hi Dave,
>
> this one is rather informative:
>
> http://www.novell.com/coolsolutions/feature/18139.html
Hi Dave,
this one is rather informative:
http://www.novell.com/coolsolutions/feature/18139.html
Also, this one from gentoo (although for 2.4) is worth reading:
http://www.gentoo.org/doc/en/articles/linux-24-stateful-fw-design.xml
HTH!
--
Regards,
Marco
On Thu, Jul 16, 2009 at 5:32 AM
oting and the SD card appears as /dev/mmcblk0.
--
Regards,
Marco
On Tue, Jul 7, 2009 at 6:11 PM, Marco wrote:
> Hi all,
>
> I'm trying to get my SD-card reader running on my Asus F3SC notebook.
> http://www.linlap.com/wiki/asus+f3sc tells me that I have to load
> modules sdhci
sdhci
sdhci 15364 0
mmc_core 34496 1 sdhci
~# tail -f /var/log/messages
I insert my SD card, but there is not device recognized in the log.
Any tips on what I'm doing wrong or what I'm missing?
Thanks!
--
Best regards,
Marco
On Mon, Jun 29, 2009 at 12:09 PM, Neil Bothwick wrote:
> On Mon, 29 Jun 2009 11:57:41 +0200, Marco wrote:
[...]
> It looks like you installed a new microcode package two days ago, that
> may be incompatible with your card. Have you tried rolling back to the
> previous version?
I
On Mon, Jun 29, 2009 at 11:57 AM, Marco wrote:
> On Mon, Jun 29, 2009 at 11:44 AM, Neil Bothwick wrote:
>> On Mon, 29 Jun 2009 11:29:22 +0200, Marco wrote:
>>
>>> after some updating (emerge --sync and emerge --update --deep world,
>>> etc.) my wirelss card does
On Mon, Jun 29, 2009 at 11:44 AM, Neil Bothwick wrote:
> On Mon, 29 Jun 2009 11:29:22 +0200, Marco wrote:
>
>> after some updating (emerge --sync and emerge --update --deep world,
>> etc.) my wirelss card does not work anymore.
>
> What did you update? Telling us you upda
On Mon, Jun 29, 2009 at 11:30 AM, Alan McKinnon wrote:
> On Monday 29 June 2009 11:29:22 Marco wrote:
>> Hi all,
>>
>> after some updating (emerge --sync and emerge --update --deep world,
>> etc.) my wirelss card does not work anymore.
>>
>> In the boot
wl3945-ucode is installed on my system.
Any hints on how to fix?
Thanks!
--
Regards,
Marco
Hi all,
thanks for all your tips! Also found some inconsistencies in my
installation, which I was able to fix.
--
Regards,
Marco
On Sat, Jun 27, 2009 at 7:04 PM, Alan McKinnon wrote:
> On Saturday 27 June 2009 18:13:56 Marco wrote:
>> On Sat, Jun 27, 2009 at 2:33 PM, Sebastian
>
On Sat, Jun 27, 2009 at 2:33 PM, Sebastian
Beßler wrote:
> Marco schrieb:
>> On Sat, Jun 27, 2009 at 2:02 PM, Dirk Heinrichs
>> wrote:
>>> Am Samstag 27 Juni 2009 15:51:20 schrieb Marco:
[...]
>
> If you have eix installed you could use
> eix -I --only-names x11-l
On Sat, Jun 27, 2009 at 2:02 PM, Dirk Heinrichs wrote:
> Am Samstag 27 Juni 2009 15:51:20 schrieb Marco:
>
>> How can I remove all the packages in the meta package?
>
> No need to do that. It's about the meta package only.
Just in case I would want to remove all the packag
the packages in the meta package? 'emerge --unmerge qt' only removes
x11-libs/qt but not the dependencies/meta ebuild
Thanks for your help!
--
Best regards,
Marco
On Thu, Jun 11, 2009 at 3:27 PM, Florian
Philipp wrote:
> Marco schrieb:
>> Hi,
>>
>> I am using OpenOffice and am missing the Helvetica font. If I run fc-list:
>>
>> ~ $ fc-list | grep -i helv
>> Helvetica:style=Oblique
>> Helvetica:style=Bold
>&
show up in OpenOffice. Any tips on how to use
them in Oo?
Thanks!
--
Best regards,
Marco
On Friday 05 June 2009 08:41:17 Steffen Loos wrote:
> Hello,
>
> Colombetti Marco schrieb:
> > ...
> > I have a similar issue on my laptop after upgrading to the kernel 2.6.29.
> > The alsasound service wont stop i have to unload the snd_hda_intel
> > module f
On Wednesday 03 June 2009 03:01:57 John covici wrote:
> on Tuesday 06/02/2009 James Ausmus(james.aus...@gmail.com) wrote
>
> > 2009/6/2 John covici
> >
> > > on Tuesday 06/02/2009 Sebastian G nther(sam...@guenther-roetgen.de)
> > > wrote
> > >
> > > > * John covici (cov...@ccs.covici.com) [
On Sun, May 31, 2009 at 1:05 PM, Stroller
wrote:
>
> On 30 May 2009, at 14:38, Marco wrote:
>>>
>>> ...
>>> I had the same problem. The fix in bug
>>> http://bugs.gentoo.org/show_bug.cgi?id=264510 solved it for me.
>>
>> Since I am rather ne
On Sat, May 30, 2009 at 7:02 AM, Dan Johansson wrote:
> On Saturday 30 May 2009, Marco wrote:
>> Hi all,
>>
>> I am trying to emerge pdftk on my amd64 machine. After re-emerging gcc
>> with gcj, compilation fails with:
>>
>> * ERROR: app-t
On Mon, May 4, 2009 at 1:44 PM, Andrew MacKenzie wrote:
> +++ Marco [gentoo-user] [Mon, May 04, 2009 at 12:56:05PM +]:
[...]
> Just to be sure you checked - Gentoo keeps temporary files in
> /var/tmp/portage/ (build temp location, sometimes things get left here) and
> /usr/porta
On Mon, May 4, 2009 at 1:52 PM, Neil Bothwick wrote:
> On Mon, 4 May 2009 12:56:05 +0000, Marco wrote:
[..]
> I'd look to see what is filling up the root partition, 10GB should be more
> than enough.
Good tip! cd /usr/src/linux and make clean gave me back 2 GB.
root partition and sda9 is my home partition where there is
plenty of space. Is there any safe way to resize with Linux tools? The
descriptions found on google did not help me a lot...
Thanks for your help!
--
Regards,
Marco
smart
> stuff(TM)" ;)
>
> My recommendation is "net-firewall/shorewall". It has a well balanced
> abstraction/granularity-ratio, and the produced iptable-rules are still
> readable :)
This is considered to be my learning example. Later I will definitely
consider using shorewall (learning one thing at a time).
Thanks!
--
Regards,
Marco
Hello again,
I took your considerations into account and changes my setting. Could
you please have look again to the output of 'iptables -L -v' (in the
attachment for better formating)?
Thanks a lot!
--
Best regards,
Marco
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts by
iptables is a good thing I guess. In
case I'd have to set up some servers, I would of course reconsider
fwbuilder.
--
Regards,
Marco
On Fri, Apr 24, 2009 at 5:00 PM, Chris Frederick wrote:
> Marco wrote:
[...]
> Your firewall looks good, but I would change a few things.
>
> First off, change your FORWARD chain to DROP. Unless you are doing
> routing on your laptop, there's no reason to have it.
My th
On Fri, Apr 24, 2009 at 4:59 PM, Eric Martin wrote:
> Marco wrote:
>> Hi all,
>>
>> I set up my first firewall on my notebook (not running any services
>> reachable from outside) using iptables. Since I am new to the topic,
>> could you please verify if
Hi all,
I set up my first firewall on my notebook (not running any services
reachable from outside) using iptables. Since I am new to the topic,
could you please verify if the output of 'iptables -L -v' is
considered to be a safe firewall? Thanks!
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkt
[...]
> You can try Wicd which is a great network manager, until you are more
> familiar with gentoo/wifi configuration.
> I have the same chip, with wpa2, wicd handless this without problems.
>
This is cool! For the moment this is perfectly ok for me!
Thanks for the tips!
On Wed, Apr 22, 2009 at 12:28 PM, Florian Philipp
wrote:
> Marco schrieb:
[...]
> You somehow mixed iwl4965 and iwl3945. Version 228.57.2.21 belongs to
> iwl4965.
>
> If you really want iwl3945, you don't need to unmask/keyword anything.
> I'm on 2.6.28 with version 1
,
Marco
Hi all,
I found the silly reason: slim set NumLock to be active and that does
not turn out to be a good thing on a notebook.
Thanks for the tip anyway!
--
Best regards,
Marco
If I stop X and restart
it using startx, the key mapping is correct.
Any ideas on how slim interferes with the keymap and how to solve that?
Thanks a lot for your help!
--
Best regards,
Marco
http://video.google.com/videoplay?docid=-3412294239230716755&hl=en
6 and sun-jdk-1.4.2.17
(required by eclipse-sdk-3.2), but not sun-jdk-1.5.0.15.
Thanks,
Marco.
,
Marco
--
gentoo-user@lists.gentoo.org mailing list
Hi,
just for information, i report that i've filed a bug on bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=9167
regards,
m
On 10/13/07, Marco Calviani <[EMAIL PROTECTED]> wrote:
> Beso,
>yes i'm always staying in powersave mode.. but in any case the
>
Beso,
yes i'm always staying in powersave mode.. but in any case the
CPU temperature tends to increase. I hope that the ACPI guys will work
on this (hoping i'm not the only one experiencing these problems). The
fans unfortunately are masked to the user in most Acer laptops, and
they are cont
ing the newly
> compiled driver. if you manage to get it working in this way ok, if not try
> contacting the guy maintaing the aceracpi module and tell him about you
> problems. he may be of help.
>
>
> 2007/10/11, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi Beso,
>
Files with trivial changes will be updated automatically as indicated.
On 10/11/07, Etaoin Shrdlu <[EMAIL PROTECTED]> wrote:
>
> On Thursday 11 October 2007, Etaoin Shrdlu wrote:
>
> > Where are the other 6 files that need updating?
> > Thanks
>
> Ok, I found bug #194043. Is the one I'm seeing?
>
o a depmod -a and update the modules installed and retry loading the newly
> compiled driver. if you manage to get it working in this way ok, if not try
> contacting the guy maintaing the aceracpi module and tell him about you
> problems. he may be of help.
>
>
> 2007/10/11, Marco C
needs an additional acpi module to have it work correctly). that was why
> i've asked you for your brand and model name.
>
> 2007/10/11, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi Beso,
> >i've tried with your trip_points modification but it gives this error
ermal zone 1 : ok, 40 C
PS: i followed all your suggestions concerning the microcode and fan
option in the kernel.
Could this be a problem of DSDT?
regards,
m
On 10/10/07, Beso <[EMAIL PROTECTED]> wrote:
>
>
> 2007/10/10, Marco Calviani <[EMAIL PROTECTED]>:
> > Hi B
>
> AFAIK only if you have lm_sensors installed and sensors working.
Yes there are both installed. But what do you mean?
m
--
[EMAIL PROTECTED] mailing list
t as a module you should
> be loading it with initramdisk before loading acpi to have a full acpi
> configuration).
> try setting these options and recompile and install the new kernel and
> modules and reboot (kexec is not working on my amd turion with 64bit enabled
> and so ma
Hi Volker,
i'm attaching my kernel .config. As you can see all the ACPI related
points are enabled.
> posting your config? make menuconfig and reading the help-text to all the
> acpi-options?
>
Thanks, i've found fancontrol, but since the laptop lacks some chipset
to control the fan itself, the
Hi Volker,
yes i can imagine there could be something wrong with ACPI, but how
can i recognize it? What is fancontrol?
m
> ACPI. You might be missing some options there. Or something else. Are you
> using fancontrol? If yes, try without, if no, try with it ;)
> --
--
[EMAIL PROTECTED] mailing
1 - 100 of 320 matches
Mail list logo
