Re: [gentoo-user] Re: USB Wireless Network Adapter?
Yes i emerge it but after i've unmerged it. So probably was added during this install. What install do you think has added it? - Grant Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Well, it wasn't the kernel right? :) Were you experimenting with driver packages for the rt73 outside of the kernel? That's where mine came from. If you remove that firmware your device won't work. I've filed a bug here: http://bugs.gentoo.org/show_bug.cgi?id=204314 - Grant For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. I think it's net-wireless/rt2x00 with rt73usb flag Yeah I can't get that to compile even on vanilla-sources-2.6.24-rc7. The developer says it uses a newer version of some wireless stuff that is in git-sources. Are you using vanilla-sources and it compiles? - Grant -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Grant a écrit : Yes i emerge it but after i've unmerged it. So probably was added during this install. What install do you think has added it? - Grant Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Well, it wasn't the kernel right? :) Were you experimenting with driver packages for the rt73 outside of the kernel? That's where mine came from. If you remove that firmware your device won't work. I've filed a bug here: http://bugs.gentoo.org/show_bug.cgi?id=204314 - Grant For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. I think it's net-wireless/rt2x00 with rt73usb flag -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Yes i emerge it but after i've unmerged it. So probably was added during this install. Grant a écrit : Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Well, it wasn't the kernel right? :) Were you experimenting with driver packages for the rt73 outside of the kernel? That's where mine came from. If you remove that firmware your device won't work. I've filed a bug here: http://bugs.gentoo.org/show_bug.cgi?id=204314 - Grant For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Yes i emerge it but after i've unmerged it. So probably was added during this install. What install do you think has added it? - Grant Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Well, it wasn't the kernel right? :) Were you experimenting with driver packages for the rt73 outside of the kernel? That's where mine came from. If you remove that firmware your device won't work. I've filed a bug here: http://bugs.gentoo.org/show_bug.cgi?id=204314 - Grant For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Grant a écrit : For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Yes i've the same: ls /lib/firmware/rt73.bin /lib/firmware/rt73.bin But i don't remember to setted up it. Well, it wasn't the kernel right? :) Were you experimenting with driver packages for the rt73 outside of the kernel? That's where mine came from. If you remove that firmware your device won't work. I've filed a bug here: http://bugs.gentoo.org/show_bug.cgi?id=204314 - Grant For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel Regards, Kalden. Grant a écrit : Actually i'm using vanilla-sources just for rt73usb driver. I've Gentoo 64Bit too. Before i used Gentoo-Sources. I just copy my .config from Gentoo Sources to Vanilla Sources and i have no issue (since 2 month). Nice, we're doing the same thing then. Did you place the firmware in /lib/firmware manually like I did? - Grant I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) I can't get any of the rt* ebuilds to compile except for CVS rt73- from bugs.gentoo.org and that one doesn't work with wpa_supplicant. I think the others won't compile because of my 64 bits (again). rt2x00 includes an rt73 driver but it requires 2.6.24. hardened-sources isn't there yet and configuring a new kernel is such a pain. I know I'd end up with a bunch of new problems. ndiswrapper is also a no-go unless I can find 64-bit XP drivers that work. - Grant I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
For rt73usb no firmware is needed. Just use vanilla kernel built-in module. as i did: CONFIG_RT2X00=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB_FIRMWARE=y # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set # CONFIG_RT2500USB is not set CONFIG_RT73USB=m CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_RT2X00_DEBUG=y With: [I] sys-kernel/vanilla-sources Installed versions: 2.6.24_rc5(2.6.24_rc5)(02:05:20 16.12.2007)(-build -symlink) Homepage:http://www.kernel.org Description: Full sources for the Linux kernel I'm using vanilla-sources-2.6.24-rc6 and I have the same options enabled as you except for the debug stuff, but the driver only works if I have /lib/firmware/rt73.bin which is installed by the bugs.gentoo.org ebuild for rt73-. Can you verify that you don't have that file? - Grant Regards, Kalden. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Actually i'm using vanilla-sources just for rt73usb driver. I've Gentoo 64Bit too. Before i used Gentoo-Sources. I just copy my .config from Gentoo Sources to Vanilla Sources and i have no issue (since 2 month). Grant a écrit : I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) I can't get any of the rt* ebuilds to compile except for CVS rt73- from bugs.gentoo.org and that one doesn't work with wpa_supplicant. I think the others won't compile because of my 64 bits (again). rt2x00 includes an rt73 driver but it requires 2.6.24. hardened-sources isn't there yet and configuring a new kernel is such a pain. I know I'd end up with a bunch of new problems. ndiswrapper is also a no-go unless I can find 64-bit XP drivers that work. - Grant I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Actually i'm using vanilla-sources just for rt73usb driver. I've Gentoo 64Bit too. Before i used Gentoo-Sources. I just copy my .config from Gentoo Sources to Vanilla Sources and i have no issue (since 2 month). Nice, we're doing the same thing then. Did you place the firmware in /lib/firmware manually like I did? - Grant I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) I can't get any of the rt* ebuilds to compile except for CVS rt73- from bugs.gentoo.org and that one doesn't work with wpa_supplicant. I think the others won't compile because of my 64 bits (again). rt2x00 includes an rt73 driver but it requires 2.6.24. hardened-sources isn't there yet and configuring a new kernel is such a pain. I know I'd end up with a bunch of new problems. ndiswrapper is also a no-go unless I can find 64-bit XP drivers that work. - Grant I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) Where do you see that driver? I'm giving vanilla-sources-2.6.24-rc6 a try and I don't see it. - Grant AJ Spagnoletti a écrit : I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) Where do you see that driver? I'm giving vanilla-sources-2.6.24-rc6 a try and I don't see it. - Grant AJ Spagnoletti a écrit : I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 I can't believe it but this is now working with the rt2x00 driver built into 2.6.24. The rt2x00 ebuild still won't compile for me though. - Grant -- [EMAIL PROTECTED] mailing list
[gentoo-user] Re: USB Wireless Network Adapter?
Does anyone know of a USB wireless network adapter that works on Gentoo? - Grant I do need it to be compatible with WPA. - Grant -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Linksys makes the WUSB54GC I believe its called, I am using it on my sisters computer, I havent tested it under gentoo but it is based on the rt73 trip and works fine under Ubuntu. Hope this helps AJ Sorry for the typo that should say rt73 chip not trip -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
On Jan 2, 2008 2:50 PM, Grant [EMAIL PROTECTED] wrote: Does anyone know of a USB wireless network adapter that works on Gentoo? - Grant I do need it to be compatible with WPA. Linksys makes the WUSB54GC I believe its called, I am using it on my sisters computer, I havent tested it under gentoo but it is based on the rt73 trip and works fine under Ubuntu. Hope this helps AJ -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
Does anyone know of a USB wireless network adapter that works on Gentoo? - Grant I do need it to be compatible with WPA. Linksys makes the WUSB54GC I believe its called, I am using it on my sisters computer, I havent tested it under gentoo but it is based on the rt73 trip and works fine under Ubuntu. Hope this helps AJ I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. No need for you to test. I'm going to buy one right now and I'll report back with my results. There are some ebuilds I'll try for the rt73 driver on bugs.gentoo.org. - Grant -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. No need for you to test. I'm going to buy one right now and I'll report back with my results. There are some ebuilds I'll try for the rt73 driver on bugs.gentoo.org. - Grant Nightmare so far. I'll let you know how it goes from here. - Grant -- [EMAIL PROTECTED] mailing list
[gentoo-user] Re: USB Wireless Network Adapter?
On 2008-01-02, Grant [EMAIL PROTECTED] wrote: Does anyone know of a USB wireless network adapter that works on Gentoo? I've got a Hawking HWUG1 that has always worked fine with the rt73 driver. -- Grant -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) AJ Spagnoletti a écrit : I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: USB Wireless Network Adapter?
I'm using ASUS WL-167g USB WLAN (rt73usb) and work well with or without WPA_SUPPLICANT. driver is already integrated in sys-kernel/vanilla-sources (2.6.24-rc5) I can't get any of the rt* ebuilds to compile except for CVS rt73- from bugs.gentoo.org and that one doesn't work with wpa_supplicant. I think the others won't compile because of my 64 bits (again). rt2x00 includes an rt73 driver but it requires 2.6.24. hardened-sources isn't there yet and configuring a new kernel is such a pain. I know I'd end up with a bunch of new problems. ndiswrapper is also a no-go unless I can find 64-bit XP drivers that work. - Grant I was actually just researching that exact one. Have you tested it with WPA? Which driver are you using? gentoo-portage.com lists a few ralink drivers but no rt73. - Grant -- [EMAIL PROTECTED] mailing list I haven't tested the WPA yet, I know it works well with a WEP encryption. I can test WPA tomorrow while everyone is at work and get back to you with those results. I used the CVS driver provided at this link [1] and followed the directions posted here [2]. Like I said I havent tested under gentoo, but I see no reason why the drivers wouldn't work. AJ [1] http://rt2x00.serialmonkey.com/wiki/index.php/Downloads [2]https://help.ubuntu.com/community/WifiDocs/Driver/RalinkRT73 -- [EMAIL PROTECTED] mailing list
