On Mon, 16 Aug 2010 20:54:02 +0200
Roman Dobosz wrote:
> Vendor_info: 'PIONEER '
> Identifikation : 'DVD-RW DVR-216D'
> Revision : '1.08'
Damn. So this was really Pioneer (and partially my) fault. After
firmware upgrading, cdrecord is working just fine. Unfortu
On Mon, 16 Aug 2010 14:29:45 +0200
joerg.schill...@fokus.fraunhofer.de (Joerg Schilling) wrote:
> It seems that the workaround for the Pioneer firmware bug does not handle the
> multi-border case.
So, it means, that this is hardware failure?
> > Track Sess Type Start Addr End Addr Size
>
Roman Dobosz wrote:
> Also, cdrecord doesn't work:
>
> # cdrecord -v -dev=4,0,0 /mnt/data/t.iso
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive dependen
On Tue, 10 Aug 2010 22:27:27 +0200
li...@gabriel-striewe.de wrote:
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command:
>
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
[...]
I have the similar problem on standard kernel 2.6.34-gentoo-r1:
# growisofs -Z /
On Wed, Aug 11, 2010 at 06:06:18PM +0200, Joerg Schilling wrote:
> li...@gabriel-striewe.de wrote:
>
> > > Ritek may not be the best media quality. Did you try Verbatim?
> > >
> > >
> > > J?rg
> >
> > They were from Aldi, however I used also CDR from there, they seem to
> > be manufactured by Pl
li...@gabriel-striewe.de wrote:
> > Ritek may not be the best media quality. Did you try Verbatim?
> >
> >
> > J?rg
>
> They were from Aldi, however I used also CDR from there, they seem to
> be manufactured by Plasmon Data Systems (both are labeled
> Tevion). With those CDR I have usually no pr
On Wed, Aug 11, 2010 at 05:00:45PM +0200, Joerg Schilling wrote:
> li...@gabriel-striewe.de wrote:
>
> > On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
> > > li...@gabriel-striewe.de wrote:
> > >
> > > > /etc/init.d/hald status
> > > > * status: stopped
> > > >
> > > > using cdr
On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
> li...@gabriel-striewe.de wrote:
>
> > /etc/init.d/hald status
> > * status: stopped
> >
> > using cdrecord on a DVD+RW works fine, but I have this error when I
> > try to burn a DVD-R:
>
> OK, could you send the outout from cdrec
li...@gabriel-striewe.de wrote:
> /etc/init.d/hald status
> * status: stopped
>
> using cdrecord on a DVD+RW works fine, but I have this error when I
> try to burn a DVD-R:
OK, could you send the outout from cdrecord -v -minfo
with this medium?
Jörg
--
EMail:jo...@schily.isdn.cs.tu-berlin.de
On Tue, Aug 10, 2010 at 11:14:55PM +0200, Joerg Schilling wrote:
> li...@gabriel-striewe.de wrote:
>
> > Hello,
> >
> > I am incurring a strange problem when trying to burn DVDs. When I
> > apply the command:
> >
> > # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
> >
> > I get the following outp
On Tue, Aug 10, 2010 at 10:27:27PM +0200, li...@gabriel-striewe.de wrote:
> Hello,
>
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command:
>
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
>
> I get the following output:
>
> Executing 'mkisofs -R -J test/
li...@gabriel-striewe.de wrote:
> Hello,
>
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command:
>
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
>
> I get the following output:
>
> Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
> To
Hello,
I am incurring a strange problem when trying to burn DVDs. When I
apply the command:
# growisofs -dvd-compat -Z /dev/sr0 -R -J test/
I get the following output:
Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
Total translation table size: 0
Total rockridge attri
13 matches
Mail list logo
