Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d1d08d1265810ef1f165864850416dcbc9725ee7
Commit: d1d08d1265810ef1f165864850416dcbc9725ee7
Parent: 1706287f6eb58726a9a0e5cbbde87f49757615e3
Author: David S. Miller <[EMAIL PROTECTED]>
AuthorDate: Mon Jan 7 20:53:33 2008 -0800
Committer: David S. Miller <[EMAIL PROTECTED]>
CommitDate: Tue Jan 8 23:30:12 2008 -0800
[NET]: Fix drivers to handle napi_disable() disabling interrupts.
When we add the generic napi_disable_pending() breakout
logic to net_rx_action() it means that napi_disable()
can cause NAPI poll interrupt events to be disabled.
And this is exactly what we want. If a napi_disable()
is pending, and we are looping in the ->poll(), we want
->poll() event interrupts to stay disabled and we want
to complete the NAPI poll ASAP.
When ->poll() break out during device down was being handled on a
per-driver basis, often these drivers would turn interrupts back on
when '!netif_running()' was detected.
And this would just cause a reschedule of the NAPI ->poll() in the
interrupt handler before the napi_disable() could get in there and
grab the NAPI_STATE_SCHED bit.
The vast majority of drivers don't care if napi_disable() might have
the side effect of disabling NAPI ->poll() event interrupts. In all
such cases, when a napi_disable() is performed, the driver just
disabled interrupts or is about to.
However there were three exceptions to this in PCNET32, R8169, and
SKY2. To fix those cases, at the subsequent napi_enable() points, I
added code to ensure that the ->poll() interrupt events are enabled in
the hardware.
Signed-off-by: David S. Miller <[EMAIL PROTECTED]>
Acked-by: Don Fry <[EMAIL PROTECTED]>
---
drivers/net/pcnet32.c | 5 +++++
drivers/net/r8169.c | 2 ++
drivers/net/sky2.c | 3 +++
3 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index ff92aca..90498ff 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -455,9 +455,14 @@ static void pcnet32_netif_start(struct net_device *dev)
{
#ifdef CONFIG_PCNET32_NAPI
struct pcnet32_private *lp = netdev_priv(dev);
+ ulong ioaddr = dev->base_addr;
+ u16 val;
#endif
netif_wake_queue(dev);
#ifdef CONFIG_PCNET32_NAPI
+ val = lp->a.read_csr(ioaddr, CSR3);
+ val &= 0x00ff;
+ lp->a.write_csr(ioaddr, CSR3, val);
napi_enable(&lp->napi);
#endif
}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 5863190..af80309 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2398,6 +2398,8 @@ static void rtl8169_wait_for_quiescence(struct net_device
*dev)
rtl8169_irq_mask_and_ack(ioaddr);
#ifdef CONFIG_R8169_NAPI
+ tp->intr_mask = 0xffff;
+ RTL_W16(IntrMask, tp->intr_event);
napi_enable(&tp->napi);
#endif
}
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a74fc11..52ec89b 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1168,6 +1168,7 @@ static void sky2_vlan_rx_register(struct net_device *dev,
struct vlan_group *grp
TX_VLAN_TAG_OFF);
}
+ sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
netif_tx_unlock_bh(dev);
}
@@ -2043,6 +2044,7 @@ static int sky2_change_mtu(struct net_device *dev, int
new_mtu)
err = sky2_rx_start(sky2);
sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
if (err)
@@ -3861,6 +3863,7 @@ static int sky2_debug_show(struct seq_file *seq, void *v)
last = sky2_read16(hw, Y2_QADDR(rxqaddr[port],
PREF_UNIT_PUT_IDX)),
sky2_read16(hw, Y2_QADDR(rxqaddr[port],
PREF_UNIT_LAST_IDX)));
+ sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
