Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b2ba34f370a66d9ed4bbd440e45296ecf3e267d3
Commit: b2ba34f370a66d9ed4bbd440e45296ecf3e267d3
Parent: 11123346bfba8e65631957c6c25ed1a6ca1b4ffe
Author: David Gibson <[EMAIL PROTECTED]>
AuthorDate: Wed Jun 13 14:52:59 2007 +1000
Committer: Paul Mackerras <[EMAIL PROTECTED]>
CommitDate: Thu Jun 14 22:30:16 2007 +1000
[POWERPC] Derive ebc ranges property from EBC registers
In the device tree for Ebony, the 'ranges' property in the node for
the EBC bridge shows the mappings from the chip select / address lines
actually used for the EBC peripherals into the address space of the
OPB. At present, these mappings are hardcoded in ebony.dts for the
mappings set up by the OpenBIOS firmware when it configures the EBC
bridge.
This replaces the hardcoded mappings with code in the zImage to
read the EBC configuration registers and create an appropriate ranges
property based on them. This should make the zImage and kernel more
robust to changes in firmware configuration. In particular, some of
the Ebony's DIP switches can change the effective address of the Flash
and other peripherals in OPB space. With this patch, the kernel will
be able to cope with at least some of the possible variations.
Signed-off-by: David Gibson <[EMAIL PROTECTED]>
Signed-off-by: Paul Mackerras <[EMAIL PROTECTED]>
---
arch/powerpc/boot/44x.c | 29 +++++++++++++++++++++++++++++
arch/powerpc/boot/44x.h | 1 +
arch/powerpc/boot/dcr.h | 37 +++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/ebony.dts | 8 +++-----
arch/powerpc/boot/ebony.c | 1 +
5 files changed, 71 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c
index bc3f570..9f64e84 100644
--- a/arch/powerpc/boot/44x.c
+++ b/arch/powerpc/boot/44x.c
@@ -54,3 +54,32 @@ void ibm44x_dbcr_reset(void)
);
}
+
+/* Read 4xx EBC bus bridge registers to get mappings of the peripheral
+ * banks into the OPB address space */
+void ibm4xx_fixup_ebc_ranges(const char *ebc)
+{
+ void *devp;
+ u32 bxcr;
+ u32 ranges[EBC_NUM_BANKS*4];
+ u32 *p = ranges;
+ int i;
+
+ for (i = 0; i < EBC_NUM_BANKS; i++) {
+ mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i));
+ bxcr = mfdcr(DCRN_EBC0_CFGDATA);
+
+ if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) {
+ *p++ = i;
+ *p++ = 0;
+ *p++ = bxcr & EBC_BXCR_BAS;
+ *p++ = EBC_BXCR_BANK_SIZE(bxcr);
+ }
+ }
+
+ devp = finddevice(ebc);
+ if (! devp)
+ fatal("Couldn't locate EBC node %s\n\r", ebc);
+
+ setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
+}
diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h
index 0da4abf..577982c 100644
--- a/arch/powerpc/boot/44x.h
+++ b/arch/powerpc/boot/44x.h
@@ -11,6 +11,7 @@
#define _PPC_BOOT_44X_H_
void ibm44x_fixup_memsize(void);
+void ibm4xx_fixup_ebc_ranges(const char *ebc);
void ibm44x_dbcr_reset(void);
void ebony_init(void *mac0, void *mac1);
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 877bc97..14b44aa 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -26,6 +26,43 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR,
SDRAM0_B1CR, SDRAM0_B2C
#define SDRAM_CONFIG_BANK_SIZE(reg) \
(0x00400000 << ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17))
+/* 440GP External Bus Controller (EBC) */
+#define DCRN_EBC0_CFGADDR 0x012
+#define DCRN_EBC0_CFGDATA 0x013
+#define EBC_NUM_BANKS 8
+#define EBC_B0CR 0x00
+#define EBC_B1CR 0x01
+#define EBC_B2CR 0x02
+#define EBC_B3CR 0x03
+#define EBC_B4CR 0x04
+#define EBC_B5CR 0x05
+#define EBC_B6CR 0x06
+#define EBC_B7CR 0x07
+#define EBC_BXCR(n) (n)
+#define EBC_BXCR_BAS 0xfff00000
+#define EBC_BXCR_BS 0x000e0000
+#define EBC_BXCR_BANK_SIZE(reg) \
+ (0x100000 << (((reg) & EBC_BXCR_BS) >> 17))
+#define EBC_BXCR_BU 0x00018000
+#define EBC_BXCR_BU_OFF 0x00000000
+#define EBC_BXCR_BU_RO 0x00008000
+#define EBC_BXCR_BU_WO 0x00010000
+#define EBC_BXCR_BU_RW 0x00018000
+#define EBC_BXCR_BW 0x00006000
+#define EBC_B0AP 0x10
+#define EBC_B1AP 0x11
+#define EBC_B2AP 0x12
+#define EBC_B3AP 0x13
+#define EBC_B4AP 0x14
+#define EBC_B5AP 0x15
+#define EBC_B6AP 0x16
+#define EBC_B7AP 0x17
+#define EBC_BXAP(n) (0x10+(n))
+#define EBC_BEAR 0x20
+#define EBC_BESR 0x21
+#define EBC_CFG 0x23
+#define EBC_CID 0x24
+
/* 440GP Clock, PM, chip control */
#define DCRN_CPC0_SR 0x0b0
#define DCRN_CPC0_ER 0x0b1
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 0ec02f4..586a2fc 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -135,11 +135,9 @@
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; // Filled in by zImage
- ranges = <0 00000000 fff00000 100000
- 1 00000000 48000000 100000
- 2 00000000 ff800000 400000
- 3 00000000 48200000 100000
- 7 00000000 48300000 100000>;
+ // ranges property is supplied by zImage
+ // based on firmware's configuration of the
+ // EBC bridge
interrupts = <5 4>;
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
index 6349858..75daeda 100644
--- a/arch/powerpc/boot/ebony.c
+++ b/arch/powerpc/boot/ebony.c
@@ -100,6 +100,7 @@ static void ebony_fixups(void)
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm44x_fixup_memsize();
dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+ ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
}
void ebony_init(void *mac0, void *mac1)
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
