Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=18a1e013cdd94d1ade2c07acdbac61d533c7fc60
Commit: 18a1e013cdd94d1ade2c07acdbac61d533c7fc60
Parent: 923dd2a46349bb1bb94aa894b7ff61093618d68a
Author: Jesper Nilsson <[EMAIL PROTECTED]>
AuthorDate: Thu Nov 29 17:03:41 2007 +0100
Committer: Jesper Nilsson <[EMAIL PROTECTED]>
CommitDate: Fri Feb 8 11:06:22 2008 +0100
CRIS v32: Add new driver files for Artpec-3.
Adds gpio and nandflash handling for Artpec-3.
---
arch/cris/arch-v32/drivers/mach-a3/Makefile | 6 +
arch/cris/arch-v32/drivers/mach-a3/gpio.c | 984 ++++++++++++++++++++++++
arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 178 +++++
3 files changed, 1168 insertions(+), 0 deletions(-)
diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile
b/arch/cris/arch-v32/drivers/mach-a3/Makefile
new file mode 100644
index 0000000..5c6d2a2
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-a3/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO) += gpio.o
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
new file mode 100644
index 0000000..4c48065
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -0,0 +1,984 @@
+/*
+ * Artec-3 general port I/O device
+ *
+ * Copyright (c) 2007 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (initial version)
+ * Ola Knutsson (LED handling)
+ * Johan Adolfsson (read/set directions, write, port G,
+ * port to ETRAX FS.
+ * Ricard Wanderlof (PWM for Artpec-3)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/etraxgpio.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/gio_defs.h>
+#include <hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/arch/mach/pinmux.h>
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+#include "../i2c.h"
+
+#define VIRT_I2C_ADDR 0x40
+#endif
+
+/* The following gio ports on ARTPEC-3 is available:
+ * pa 32 bits
+ * pb 32 bits
+ * pc 16 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120 /* experimental MAJOR number */
+
+#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) \
+ do { \
+ dp_cnt++; \
+ if (dp_cnt % 1000 == 0) \
+ x; \
+ } while (0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg);
+#endif
+static int gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+ loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp,
+ struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+ struct gpio_private *next;
+ /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+ unsigned char clk_mask;
+ unsigned char data_mask;
+ unsigned char write_msb;
+ unsigned char pad1;
+ /* These fields are generic */
+ unsigned long highalarm, lowalarm;
+ wait_queue_head_t alarm_wq;
+ int minor;
+};
+
+static void gpio_set_alarm(struct gpio_private *priv);
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist;
+
+static int wanted_interrupts;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) \
+ (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
+#define GIO_REG_WR_ADDR(reg) \
+ (volatile unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
+unsigned long led_dummy;
+unsigned long port_d_dummy; /* Only input on Artpec-3 */
+unsigned long port_e_dummy; /* Non existent on Artpec-3 */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static unsigned long virtual_dummy;
+static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
+static unsigned short cached_virtual_gpio_read;
+#endif
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+ GIO_REG_WR_ADDR(rw_pa_dout),
+ GIO_REG_WR_ADDR(rw_pb_dout),
+ &led_dummy,
+ GIO_REG_WR_ADDR(rw_pc_dout),
+ &port_d_dummy,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ &port_e_dummy,
+ &virtual_dummy,
+#endif
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+ GIO_REG_RD_ADDR(r_pa_din),
+ GIO_REG_RD_ADDR(r_pb_din),
+ &led_dummy,
+ GIO_REG_RD_ADDR(r_pc_din),
+ GIO_REG_RD_ADDR(r_pd_din),
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ &port_e_dummy,
+ &virtual_dummy,
+#endif
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+ 0,
+ CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+ 0,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ 0,
+ CONFIG_ETRAX_PV_CHANGEABLE_DIR,
+#endif
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+ 0,
+ CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+ 0,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ 0,
+ CONFIG_ETRAX_PV_CHANGEABLE_BITS,
+#endif
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+ GIO_REG_WR_ADDR(rw_pa_oe),
+ GIO_REG_WR_ADDR(rw_pb_oe),
+ &led_dummy,
+ GIO_REG_WR_ADDR(rw_pc_oe),
+ &port_d_dummy,
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ &port_e_dummy,
+ &virtual_rw_pv_oe,
+#endif
+};
+
+static void
+gpio_set_alarm(struct gpio_private *priv)
+{
+ int bit;
+ int intr_cfg;
+ int mask;
+ int pins;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
+ pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
+ mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
+
+ for (bit = 0; bit < 32; bit++) {
+ int intr = bit % 8;
+ int pin = bit / 8;
+ if (priv->minor < GPIO_MINOR_LEDS)
+ pin += priv->minor * 4;
+ else
+ pin += (priv->minor - 1) * 4;
+
+ if (priv->highalarm & (1<<bit)) {
+ intr_cfg |= (regk_gio_hi << (intr * 3));
+ mask |= 1 << intr;
+ wanted_interrupts = mask & 0xff;
+ pins |= pin << (intr * 4);
+ } else if (priv->lowalarm & (1<<bit)) {
+ intr_cfg |= (regk_gio_lo << (intr * 3));
+ mask |= 1 << intr;
+ wanted_interrupts = mask & 0xff;
+ pins |= pin << (intr * 4);
+ }
+ }
+
+ REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
+ REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
+ REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
+
+ local_irq_restore(flags);
+}
+
+static unsigned int
+gpio_poll(struct file *file, struct poll_table_struct *wait)
+{
+ unsigned int mask = 0;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned long data;
+ unsigned long tmp;
+
+ if (priv->minor >= GPIO_MINOR_PWM0 &&
+ priv->minor <= GPIO_MINOR_LAST_PWM)
+ return 0;
+
+ poll_wait(file, &priv->alarm_wq, wait);
+ if (priv->minor <= GPIO_MINOR_D) {
+ data = *data_in[priv->minor];
+ REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
+ tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
+ tmp &= I2C_INTERRUPT_BITS;
+ tmp |= wanted_interrupts;
+ REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
+ } else
+ return 0;
+
+ if ((data & priv->highalarm) || (~data & priv->lowalarm))
+ mask = POLLIN|POLLRDNORM;
+
+ DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
+ return mask;
+}
+
+static irqreturn_t
+gpio_interrupt(int irq, void *dev_id)
+{
+ reg_gio_rw_intr_mask intr_mask;
+ reg_gio_r_masked_intr masked_intr;
+ reg_gio_rw_ack_intr ack_intr;
+ unsigned long tmp;
+ unsigned long tmp2;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ unsigned char enable_gpiov_ack = 0;
+#endif
+
+ /* Find what PA interrupts are active */
+ masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+ tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+ /* Find those that we have enabled */
+ spin_lock(&alarm_lock);
+ tmp &= wanted_interrupts;
+ spin_unlock(&alarm_lock);
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ /* Something changed on virtual GPIO. Interrupt is acked by
+ * reading the device.
+ */
+ if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
+ i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
+ sizeof(cached_virtual_gpio_read));
+ enable_gpiov_ack = 1;
+ }
+#endif
+
+ /* Ack them */
+ ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+ REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+ /* Disable those interrupts.. */
+ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+ tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+ tmp2 &= ~tmp;
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ /* Do not disable interrupt on virtual GPIO. Changes on virtual
+ * pins are only noticed by an interrupt.
+ */
+ if (enable_gpiov_ack)
+ tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+ intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+ return IRQ_RETVAL(tmp);
+}
+
+
+static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
+ loff_t *off)
+{
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned char data, clk_mask, data_mask, write_msb;
+ unsigned long flags;
+ unsigned long shadow;
+ volatile unsigned long *port;
+ ssize_t retval = count;
+ /* Only bits 0-7 may be used for write operations but allow all
+ devices except leds... */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ if (priv->minor == GPIO_MINOR_V)
+ return -EFAULT;
+#endif
+ if (priv->minor == GPIO_MINOR_LEDS)
+ return -EFAULT;
+
+ if (priv->minor >= GPIO_MINOR_PWM0 &&
+ priv->minor <= GPIO_MINOR_LAST_PWM)
+ return -EFAULT;
+
+ if (!access_ok(VERIFY_READ, buf, count))
+ return -EFAULT;
+
+ clk_mask = priv->clk_mask;
+ data_mask = priv->data_mask;
+ /* It must have been configured using the IO_CFG_WRITE_MODE */
+ /* Perhaps a better error code? */
+ if (clk_mask == 0 || data_mask == 0)
+ return -EPERM;
+
+ write_msb = priv->write_msb;
+ D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
+ "msb: %i\n",
+ count, data_mask, clk_mask, write_msb));
+ port = data_out[priv->minor];
+
+ while (count--) {
+ int i;
+ data = *buf++;
+ if (priv->write_msb) {
+ for (i = 7; i >= 0; i--) {
+ local_irq_save(flags);
+ shadow = *port;
+ *port = shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *port = shadow |= data_mask;
+ else
+ *port = shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *port = shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ } else {
+ for (i = 0; i <= 7; i++) {
+ local_irq_save(flags);
+ shadow = *port;
+ *port = shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *port = shadow |= data_mask;
+ else
+ *port = shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *port = shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ }
+ }
+ return retval;
+}
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *priv;
+ int p = iminor(inode);
+
+ if (p > GPIO_MINOR_LAST_PWM ||
+ (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
+ return -EINVAL;
+
+ priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
+
+ if (!priv)
+ return -ENOMEM;
+ memset(priv, 0, sizeof(*priv));
+
+ priv->minor = p;
+ filp->private_data = (void *)priv;
+
+ /* initialize the io/alarm struct, not for PWM ports though */
+ if (p <= GPIO_MINOR_LAST) {
+
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ priv->highalarm = 0;
+ priv->lowalarm = 0;
+
+ init_waitqueue_head(&priv->alarm_wq);
+
+ /* link it into our alarmlist */
+ spin_lock_irq(&alarm_lock);
+ priv->next = alarmlist;
+ alarmlist = priv;
+ spin_unlock_irq(&alarm_lock);
+ }
+
+ return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *p;
+ struct gpio_private *todel;
+ /* local copies while updating them: */
+ unsigned long a_high, a_low;
+
+ /* prepare to free private structure */
+ todel = (struct gpio_private *)filp->private_data;
+
+ /* unlink from alarmlist - only for non-PWM ports though */
+ if (todel->minor <= GPIO_MINOR_LAST) {
+ spin_lock_irq(&alarm_lock);
+ p = alarmlist;
+
+ if (p == todel)
+ alarmlist = todel->next;
+ else {
+ while (p->next != todel)
+ p = p->next;
+ p->next = todel->next;
+ }
+
+ /* Check if there are still any alarms set */
+ p = alarmlist;
+ a_high = 0;
+ a_low = 0;
+ while (p) {
+ if (p->minor == GPIO_MINOR_A) {
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ p->lowalarm |= (1 <<
CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+ a_high |= p->highalarm;
+ a_low |= p->lowalarm;
+ }
+
+ p = p->next;
+ }
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ /* Variable 'a_low' needs to be set here again
+ * to ensure that interrupt for virtual GPIO is handled.
+ */
+ a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
+#endif
+
+ spin_unlock_irq(&alarm_lock);
+ }
+ kfree(todel);
+
+ return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
+{
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ unsigned long flags;
+ unsigned long dir_shadow;
+
+ local_irq_save(flags);
+ dir_shadow = *dir_oe[priv->minor];
+ dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+ *dir_oe[priv->minor] = dir_shadow;
+ local_irq_restore(flags);
+
+ if (priv->minor == GPIO_MINOR_C)
+ dir_shadow ^= 0xFFFF; /* Only 16 bits */
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ else if (priv->minor == GPIO_MINOR_V)
+ dir_shadow ^= 0xFFFF; /* Only 16 bits */
+#endif
+ else
+ dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
+
+ return dir_shadow;
+
+} /* setget_input */
+
+inline unsigned long setget_output(struct gpio_private *priv, unsigned long
arg)
+{
+ unsigned long flags;
+ unsigned long dir_shadow;
+
+ local_irq_save(flags);
+ dir_shadow = *dir_oe[priv->minor];
+ dir_shadow |= (arg & changeable_dir[priv->minor]);
+ *dir_oe[priv->minor] = dir_shadow;
+ local_irq_restore(flags);
+ return dir_shadow;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned long val;
+ unsigned long shadow;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+
+ if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
+ return -EINVAL;
+
+ /* Check for special ioctl handlers first */
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ if (priv->minor == GPIO_MINOR_V)
+ return virtual_gpio_ioctl(file, cmd, arg);
+#endif
+
+ if (priv->minor == GPIO_MINOR_LEDS)
+ return gpio_leds_ioctl(cmd, arg);
+
+ if (priv->minor >= GPIO_MINOR_PWM0 &&
+ priv->minor <= GPIO_MINOR_LAST_PWM)
+ return gpio_pwm_ioctl(priv, cmd, arg);
+
+ switch (_IOC_NR(cmd)) {
+ case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+ /* Read the port. */
+ return *data_in[priv->minor];
+ break;
+ case IO_SETBITS:
+ local_irq_save(flags);
+ /* Set changeable bits with a 1 in arg. */
+ shadow = *data_out[priv->minor];
+ shadow |= (arg & changeable_bits[priv->minor]);
+ *data_out[priv->minor] = shadow;
+ local_irq_restore(flags);
+ break;
+ case IO_CLRBITS:
+ local_irq_save(flags);
+ /* Clear changeable bits with a 1 in arg. */
+ shadow = *data_out[priv->minor];
+ shadow &= ~(arg & changeable_bits[priv->minor]);
+ *data_out[priv->minor] = shadow;
+ local_irq_restore(flags);
+ break;
+ case IO_HIGHALARM:
+ /* Set alarm when bits with 1 in arg go high. */
+ priv->highalarm |= arg;
+ gpio_set_alarm(priv);
+ break;
+ case IO_LOWALARM:
+ /* Set alarm when bits with 1 in arg go low. */
+ priv->lowalarm |= arg;
+ gpio_set_alarm(priv);
+ break;
+ case IO_CLRALARM:
+ /* Clear alarm for bits with 1 in arg. */
+ priv->highalarm &= ~arg;
+ priv->lowalarm &= ~arg;
+ gpio_set_alarm(priv);
+ break;
+ case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+ /* Read direction 0=input 1=output */
+ return *dir_oe[priv->minor];
+ case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ return setget_input(priv, arg);
+ break;
+ case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+ /* Set direction 0=unchanged 1=output,
+ * return mask with 1=output
+ */
+ return setget_output(priv, arg);
+
+ case IO_CFG_WRITE_MODE:
+ {
+ unsigned long dir_shadow;
+ dir_shadow = *dir_oe[priv->minor];
+
+ priv->clk_mask = arg & 0xFF;
+ priv->data_mask = (arg >> 8) & 0xFF;
+ priv->write_msb = (arg >> 16) & 0x01;
+ /* Check if we're allowed to change the bits and
+ * the direction is correct
+ */
+ if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+ (priv->data_mask & changeable_bits[priv->minor]) &&
+ (priv->clk_mask & dir_shadow) &&
+ (priv->data_mask & dir_shadow))) {
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ return -EPERM;
+ }
+ break;
+ }
+ case IO_READ_INBITS:
+ /* *arg is result of reading the input pins */
+ val = *data_in[priv->minor];
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ return 0;
+ break;
+ case IO_READ_OUTBITS:
+ /* *arg is result of reading the output shadow */
+ val = *data_out[priv->minor];
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_INPUT:
+ /* bits set in *arg is set to input,
+ * *arg updated with current input pins.
+ */
+ if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_input(priv, val);
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_OUTPUT:
+ /* bits set in *arg is set to output,
+ * *arg updated with current output pins.
+ */
+ if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_output(priv, val);
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ default:
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static int
+virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned short val;
+ unsigned short shadow;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_SETBITS:
+ local_irq_save(flags);
+ /* Set changeable bits with a 1 in arg. */
+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+ shadow |= ~*dir_oe[priv->minor];
+ shadow |= (arg & changeable_bits[priv->minor]);
+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+ local_irq_restore(flags);
+ break;
+ case IO_CLRBITS:
+ local_irq_save(flags);
+ /* Clear changeable bits with a 1 in arg. */
+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+ shadow |= ~*dir_oe[priv->minor];
+ shadow &= ~(arg & changeable_bits[priv->minor]);
+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+ local_irq_restore(flags);
+ break;
+ case IO_HIGHALARM:
+ /* Set alarm when bits with 1 in arg go high. */
+ priv->highalarm |= arg;
+ break;
+ case IO_LOWALARM:
+ /* Set alarm when bits with 1 in arg go low. */
+ priv->lowalarm |= arg;
+ break;
+ case IO_CLRALARM:
+ /* Clear alarm for bits with 1 in arg. */
+ priv->highalarm &= ~arg;
+ priv->lowalarm &= ~arg;
+ break;
+ case IO_CFG_WRITE_MODE:
+ {
+ unsigned long dir_shadow;
+ dir_shadow = *dir_oe[priv->minor];
+
+ priv->clk_mask = arg & 0xFF;
+ priv->data_mask = (arg >> 8) & 0xFF;
+ priv->write_msb = (arg >> 16) & 0x01;
+ /* Check if we're allowed to change the bits and
+ * the direction is correct
+ */
+ if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+ (priv->data_mask & changeable_bits[priv->minor]) &&
+ (priv->clk_mask & dir_shadow) &&
+ (priv->data_mask & dir_shadow))) {
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ return -EPERM;
+ }
+ break;
+ }
+ case IO_READ_INBITS:
+ /* *arg is result of reading the input pins */
+ val = cached_virtual_gpio_read;
+ val &= ~*dir_oe[priv->minor];
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ return 0;
+ break;
+ case IO_READ_OUTBITS:
+ /* *arg is result of reading the output shadow */
+ i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
+ val &= *dir_oe[priv->minor];
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_INPUT:
+ {
+ /* bits set in *arg is set to input,
+ * *arg updated with current input pins.
+ */
+ unsigned short input_mask = ~*dir_oe[priv->minor];
+ if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_input(priv, val);
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ if ((input_mask & val) != input_mask) {
+ /* Input pins changed. All ports desired as input
+ * should be set to logic 1.
+ */
+ unsigned short change = input_mask ^ val;
+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
+ sizeof(shadow));
+ shadow &= ~change;
+ shadow |= val;
+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
+ sizeof(shadow));
+ }
+ break;
+ }
+ case IO_SETGET_OUTPUT:
+ /* bits set in *arg is set to output,
+ * *arg updated with current output pins.
+ */
+ if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_output(priv, val);
+ if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ default:
+ return -EINVAL;
+ } /* switch */
+ return 0;
+}
+#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+ unsigned char green;
+ unsigned char red;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_LEDACTIVE_SET:
+ green = ((unsigned char) arg) & 1;
+ red = (((unsigned char) arg) >> 1) & 1;
+ LED_ACTIVE_SET_G(green);
+ LED_ACTIVE_SET_R(red);
+ break;
+
+ default:
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
+{
+ int pinmux_pwm = pinmux_pwm0 + pwm_port;
+ int mode;
+ reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
+ .ccd_val = 0,
+ .ccd_override = regk_gio_no,
+ .mode = regk_gio_no
+ };
+ int allocstatus;
+
+ if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
+ return -EFAULT;
+ rw_pwm_ctrl.mode = mode;
+ if (mode != PWM_OFF)
+ allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
+ else
+ allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
+ if (allocstatus)
+ return allocstatus;
+ REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
+ 12 * pwm_port, rw_pwm_ctrl);
+ return 0;
+}
+
+static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
+{
+ struct io_pwm_set_period periods;
+ reg_gio_rw_pwm0_var rw_pwm_widths;
+
+ if (copy_from_user(&periods, (struct io_pwm_set_period *) arg,
+ sizeof(periods)))
+ return -EFAULT;
+ if (periods.lo > 8191 || periods.hi > 8191)
+ return -EINVAL;
+ rw_pwm_widths.lo = periods.lo;
+ rw_pwm_widths.hi = periods.hi;
+ REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
+ 12 * pwm_port, rw_pwm_widths);
+ return 0;
+}
+
+static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
+{
+ unsigned int duty;
+ reg_gio_rw_pwm0_data rw_pwm_duty;
+
+ if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
+ return -EFAULT;
+ if (duty > 255)
+ return -EINVAL;
+ rw_pwm_duty.data = duty;
+ REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
+ 12 * pwm_port, rw_pwm_duty);
+ return 0;
+}
+
+static int
+gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg)
+{
+ int pwm_port = priv->minor - GPIO_MINOR_PWM0;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_PWM_SET_MODE:
+ return gpio_pwm_set_mode(arg, pwm_port);
+ case IO_PWM_SET_PERIOD:
+ return gpio_pwm_set_period(arg, pwm_port);
+ case IO_PWM_SET_DUTY:
+ return gpio_pwm_set_duty(arg, pwm_port);
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+struct file_operations gpio_fops = {
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
+};
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+static void
+virtual_gpio_init(void)
+{
+ reg_gio_rw_intr_cfg intr_cfg;
+ reg_gio_rw_intr_mask intr_mask;
+ unsigned short shadow;
+
+ shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
+ shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
+
+ /* Set interrupt mask and on what state the interrupt shall trigger.
+ * For virtual gpio the interrupt shall trigger on logic '0'.
+ */
+ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+
+ switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
+ case 0:
+ intr_cfg.pa0 = regk_gio_lo;
+ intr_mask.pa0 = regk_gio_yes;
+ break;
+ case 1:
+ intr_cfg.pa1 = regk_gio_lo;
+ intr_mask.pa1 = regk_gio_yes;
+ break;
+ case 2:
+ intr_cfg.pa2 = regk_gio_lo;
+ intr_mask.pa2 = regk_gio_yes;
+ break;
+ case 3:
+ intr_cfg.pa3 = regk_gio_lo;
+ intr_mask.pa3 = regk_gio_yes;
+ break;
+ case 4:
+ intr_cfg.pa4 = regk_gio_lo;
+ intr_mask.pa4 = regk_gio_yes;
+ break;
+ case 5:
+ intr_cfg.pa5 = regk_gio_lo;
+ intr_mask.pa5 = regk_gio_yes;
+ break;
+ case 6:
+ intr_cfg.pa6 = regk_gio_lo;
+ intr_mask.pa6 = regk_gio_yes;
+ break;
+ case 7:
+ intr_cfg.pa7 = regk_gio_lo;
+ intr_mask.pa7 = regk_gio_yes;
+ break;
+ }
+
+ REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+}
+#endif
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+ int res;
+
+ /* do the formalities */
+
+ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+ if (res < 0) {
+ printk(KERN_ERR "gpio: couldn't get a major number.\n");
+ return res;
+ }
+
+ /* Clear all leds */
+ LED_NETWORK_GRP0_SET(0);
+ LED_NETWORK_GRP1_SET(0);
+ LED_ACTIVE_SET(0);
+ LED_DISK_READ(0);
+ LED_DISK_WRITE(0);
+
+ printk(KERN_INFO "ETRAX FS GPIO driver v2.6, (c) 2003-2007 "
+ "Axis Communications AB\n");
+ if (request_irq(GIO_INTR_VECT, gpio_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist))
+ printk(KERN_ERR "err: irq for gpio\n");
+
+ /* No IRQs by default. */
+ REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
+
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+ virtual_gpio_init();
+#endif
+
+ return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
new file mode 100644
index 0000000..2fda3db
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -0,0 +1,178 @@
+/*
+ * arch/cris/arch-v32/drivers/nandflash.c
+ *
+ * Copyright (c) 2007
+ *
+ * Derived from drivers/mtd/nand/spia.c
+ * Copyright (C) 2000 Steven J. Hill ([EMAIL PROTECTED])
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/arch/memmap.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/pio_defs.h>
+#include <pinmux.h>
+#include <asm/io.h>
+
+#define MANUAL_ALE_CLE_CONTROL 1
+
+#define regf_ALE a0
+#define regf_CLE a1
+#define regf_NCE ce0_n
+
+#define CLE_BIT 10
+#define ALE_BIT 11
+#define CE_BIT 12
+
+/* Bitmask for control pins */
+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
+
+static struct mtd_info *crisv32_mtd;
+/*
+ * hardware specific access to control-lines
+ */
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ unsigned long flags;
+ reg_pio_rw_dout dout;
+ struct nand_chip *this = mtd->priv;
+
+ local_irq_save(flags);
+
+ /* control bits change */
+ if (ctrl & NAND_CTRL_CHANGE) {
+ dout = REG_RD(pio, regi_pio, rw_dout);
+ dout.regf_NCE = (ctrl & NAND_NCE) ? 0 : 1;
+
+#if !MANUAL_ALE_CLE_CONTROL
+ if (ctrl & NAND_ALE) {
+ /* A0 = ALE high */
+ this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+ regi_pio, rw_io_access1);
+ } else if (ctrl & NAND_CLE) {
+ /* A1 = CLE high */
+ this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+ regi_pio, rw_io_access2);
+ } else {
+ /* A1 = CLE and A0 = ALE low */
+ this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+ regi_pio, rw_io_access0);
+ }
+#else
+
+ dout.regf_CLE = (ctrl & NAND_CLE) ? 1 : 0;
+ dout.regf_ALE = (ctrl & NAND_ALE) ? 1 : 0;
+#endif
+ REG_WR(pio, regi_pio, rw_dout, dout);
+ }
+
+ /* command to chip */
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+
+ local_irq_restore(flags);
+}
+
+/*
+* read device ready pin
+*/
+int crisv32_device_ready(struct mtd_info *mtd)
+{
+ reg_pio_r_din din = REG_RD(pio, regi_pio, r_din);
+ return din.rdy;
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info *__init crisv32_nand_flash_probe(void)
+{
+ void __iomem *read_cs;
+ void __iomem *write_cs;
+
+ struct nand_chip *this;
+ int err = 0;
+
+ reg_pio_rw_man_ctrl man_ctrl = {
+ .regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+ .regf_ALE = regk_pio_yes,
+ .regf_CLE = regk_pio_yes
+#endif
+ };
+ reg_pio_rw_oe oe = {
+ .regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+ .regf_ALE = regk_pio_yes,
+ .regf_CLE = regk_pio_yes
+#endif
+ };
+ reg_pio_rw_dout dout = { .regf_NCE = 1 };
+
+ /* Allocate pio pins to pio */
+ crisv32_pinmux_alloc_fixed(pinmux_pio);
+ /* Set up CE, ALE, CLE (ce0_n, a0, a1) for manual control and output */
+ REG_WR(pio, regi_pio, rw_man_ctrl, man_ctrl);
+ REG_WR(pio, regi_pio, rw_dout, dout);
+ REG_WR(pio, regi_pio, rw_oe, oe);
+
+ /* Allocate memory for MTD device structure and private data */
+ crisv32_mtd = kmalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip), GFP_KERNEL);
+ if (!crisv32_mtd) {
+ printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD "
+ "device structure.\n");
+ err = -ENOMEM;
+ return NULL;
+ }
+
+ read_cs = write_cs = (void __iomem *)REG_ADDR(pio, regi_pio,
+ rw_io_access0);
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *) (&crisv32_mtd[1]);
+
+ /* Initialize structures */
+ memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
+ memset((char *) this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ crisv32_mtd->priv = this;
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = read_cs;
+ this->IO_ADDR_W = write_cs;
+ this->cmd_ctrl = crisv32_hwcontrol;
+ this->dev_ready = crisv32_device_ready;
+ /* 20 us command delay time */
+ this->chip_delay = 20;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ /* Enable the following for a flash based bad block table */
+ /* this->options = NAND_USE_FLASH_BBT; */
+
+ /* Scan to find existance of the device */
+ if (nand_scan(crisv32_mtd, 1)) {
+ err = -ENXIO;
+ goto out_mtd;
+ }
+
+ return crisv32_mtd;
+
+out_mtd:
+ kfree(crisv32_mtd);
+ return NULL;
+}
+
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
