Re: [Gluster-users] sync - sshd at different port.

2013-10-02 Thread Markus Ueberall
Am 01.10.2013 00:59, schrieb Michael Post: Hello together, Hi Michael, i setup geo-replication. In my environment my ssh server use a different port. Where can i setup the different port, so gsync use the different port? As a quick workaround, I'd suggest to use a tunnel which will connect/

Re: [Gluster-users] Using gluster with ipv6

2013-10-02 Thread Markus Ueberall
Am 30.09.2013 16:24, schrieb Mickaël Villers: Hi, Hi, I'm starting to use gluster version debian/unstable 3.4.0-4 but I need use ipv6 in my network, but just can't setup glusterfs for. I tried configuring IPv6 or DNS (only resolving at IPv6), got errors in both case. I also need IPv6 suppo

Re: [Gluster-users] Advice for building samba-glusterfs-vfs

2013-10-02 Thread David Gibbons
Dan, I had the same trouble yesterday. As it happens, I created a doc to help script installs of future nodes. I did not snip out the portions that apply to what you're looking for, but the script below works for me. The biggest issue was that some modules were apparently installed in lib and the

Re: [Gluster-users] Managing volumes is unreliable

2013-10-02 Thread Jeff Darcy
On 10/02/2013 06:57 AM, Heggland, Christian wrote: Unsure if its recommended but you could try and do the following if the set command stops adding / removing settings: 1. Stop the volume 2. Edit the config file for that volume on each node ( /var/lib/glusterd/vols ) 3. Start the volume again.

Re: [Gluster-users] Managing volumes is unreliable

2013-10-02 Thread Maciej Gałkiewicz
On 2 October 2013 12:57, Heggland, Christian wrote: > Unsure if its recommended but you could try and do the following if the set > command stops adding / removing settings: > > 1. Stop the volume > 2. Edit the config file for that volume on each node ( /var/lib/glusterd/vols > ) > 3. Start the

Re: [Gluster-users] Managing volumes is unreliable

2013-10-02 Thread Heggland, Christian
Unsure if its recommended but you could try and do the following if the set command stops adding / removing settings: 1. Stop the volume 2. Edit the config file for that volume on each node ( /var/lib/glusterd/vols ) 3. Start the volume again. I've had to do this in order to update the access li

Re: [Gluster-users] Shutting down a GlusterFS server.

2013-10-02 Thread Bobby Jacob
Hi Hoggins, Thanks. I have set gluster services to start during startup. I believe the self-heal would play the most important role of taking care of the changes in the dead-peer once it comes back up. Any comments or suggestions for the same ? Thanks & Regards, Bobby Jacob -Original Messa

Re: [Gluster-users] Shutting down a GlusterFS server.

2013-10-02 Thread Hoggins!
Hello Bobby, I experienced problems shutting down Gluster servers, because the startup scripts (SystemD) did not have dependencies for system shutdown that would stop the Gluster services before anything else. My problems were also related to the fact that my nodes are connected to each other thro

[Gluster-users] Shutting down a GlusterFS server.

2013-10-02 Thread Bobby Jacob
Hi, I have a 2-node replica volume running with GlusterFS 3.3.2 on Centos 6.4. I want to shut down one of the gluster servers for maintenance. Any best practice that is to be followed while turning off a server in terms of services etc. Or can I just shut down the server. ? Thanks & Regards,

[Gluster-users] Managing volumes is unreliable

2013-10-02 Thread Maciej Gałkiewicz
Hi I am using glusterfs with following scenario: Multiple untrusted groups of clients (hosts) need access to shared storage. For each group a separate glusterfs volume is created with authentication based on IP addresses. Groups and clients are dynamically created/removed so there are a lot of ope