Is it reasonable for me to just remove all of the XSYNC-CHANGELOG
files to make it start over with a full sync?
I just want to figure out how to get it to pick up again. Is it better
to remove and re-create the geo-rep session?
Thanks,
Dave
On Tue, May 5, 2015 at 9:27 AM, David Gibbons
Thank you, responses and further questions inline below.
In master nodes, look for log messages. Let us know if you feel any issue
in log messages. (/var/log/glusterfs/geo-replication/)
The workers have been transitioning between active and faulty. They will
throw an error in the log (I
I caught one of the nodes transitioning into faulty mode, log output is
below.
In master nodes, look for log messages. Let us know if you feel any issue
in log messages. (/var/log/glusterfs/geo-replication/)
When one of the nodes drops into faulty, which happens periodically, this
is the
...@redhat.com wrote:
Status output has issue showing exact number of files in sync. Please check
the numbers on disk and let us know if difference exists between Master and
Secondary Volume.
--
regards
Aravinda
On 05/05/2015 06:58 AM, David Gibbons wrote:
I am having an issue with geo-replication
I am having an issue with geo-replication. There were a number of
complications when I upgraded to 3.5.3, but geo-replication was (I
think) working at some point. The volume is accessed via samba using
vfs_glusterfs.
The main issue is that geo-replication has not been sending updated
copies of
I use VIPs and keepalived on my production configuration as well. You don't
want to peer probe with the VIP. You want to peer probe with the actual IP.
The VIP is merely a forwarding-facing mechanism for clients to connect to,
and that's why it fails between your gluster peers. The peers
and status commands with --xml.
The Python tracebacks you are seeing in logs are due to inability to parse
the output of gluster commands when xml is not supported.
--
regards
Aravinda
http://aravindavk.in
On 12/11/2014 07:56 PM, David Gibbons wrote:
Thanks for the feedback, answers inline
Thanks for the feedback, answers inline below:
Have you followed all the upgrade steps w.r.t geo-rep
mentioned in the following link?
I didn't upgrade geo-rep, I disconnected the old replicated server and
started from scratch. So everything with regard to geo-rep is
fresh/brand-new.
-
From: David Gibbons david.c.gibb...@gmail.com
To: Kotresh Hiremath Ravishankar khire...@redhat.com
Cc: gluster-users Gluster-users@gluster.org, vno...@stonefly.com
Sent: Tuesday, December 9, 2014 6:16:03 PM
Subject: Re: [Gluster-users] Geo-Replication Issue
Hi Kotresh,
Yes, I believe that I
error somewhere that I need to track down? This
volume *was* upgraded from 3.4.2 a few weeks ago.
Cheers,
Dave
On Wed, Dec 10, 2014 at 7:29 AM, David Gibbons david.c.gibb...@gmail.com
wrote:
Hi Kotresh,
Thanks for the tip. Unfortunately that does not seem to have any effect.
The path
bug and so not able to sync symlinks ?
https://bugzilla.redhat.com/show_bug.cgi?id=1105283
Does geo-rep status say Not Started ?
Thanks and Regards,
Kotresh H R
- Original Message -
From: David Gibbons david.c.gibb...@gmail.com
To: gluster-users Gluster-users@gluster.org
Cc: vno
, 2014 at 11:01 AM, David Gibbons david.c.gibb...@gmail.com
wrote:
Ok,
I was able to get geo-replication configured by
changing /usr/local/libexec/glusterfs/gverify.sh to use ssh to access the
local machine, instead of accessing bash -c directly. I then found that the
hook script was missing
Hi All,
I am running into an issue where it appears that some hooks are missing
from /var/lib/glusterd/hooks
I am running version 3.5.3 and recently did an upgrade to that version from
3.4.2.
I built from source with make make install. Is there another make target
I need to use to get the
Thank you, Niels.
Bugzilla ID is 1171477
Dave
On Sun, Dec 7, 2014 at 10:12 AM, Niels de Vos nde...@redhat.com wrote:
On Sun, Dec 07, 2014 at 09:55:11AM -0500, David Gibbons wrote:
Hi All,
I am running into an issue where it appears that some hooks are missing
from /var/lib/glusterd
, David Gibbons david.c.gibb...@gmail.com
wrote:
Good Morning,
I am having some trouble getting geo-replication started on a 3.5.3 volume.
I have verified that password-less SSH is functional in both directions
from the backup gluster server, and all nodes in the production gluster. I
have
Good Morning,
I am having some trouble getting geo-replication started on a 3.5.3 volume.
I have verified that password-less SSH is functional in both directions
from the backup gluster server, and all nodes in the production gluster. I
have verified that all nodes in production and backup
--
*From: *David Gibbons david.c.gibb...@gmail.com
*To: *Krutika Dhananjay kdhan...@redhat.com
*Cc: *gluster-users gluster-users@gluster.org
*Sent: *Monday, December 1, 2014 6:35:55 PM
*Subject: *Re: [Gluster-users] Upgraded from 3.4.1 to 3.5.2, quota no
longer working
Hi All,
I performed a long-awaited upgrade from 3.4.1 to 3.5.2 today following the
instructions for an offline upgrade outlined here:
http://www.gluster.org/community/documentation/index.php/Upgrade_to_3.5
I ran the pre- and post- upgrade scripts as instructed, intending to move
the quotas over
I am interested in hearing this answer too.
James, if you have a consistency check script, maybe just changing the
timestamp or some other attribute on the file (perhaps something as simple
as chmod to something and then back) would trigger the integrated rsync.
Dave
On Sat, Oct 4, 2014 at 5:33
Boy, it's not a good day for my list etiquette. Apologies, folks.
-- Forwarded message --
From: David Gibbons david.c.gibb...@gmail.com
Date: Fri, Jun 27, 2014 at 3:10 PM
Subject: Re: [Gluster-users] Samba vfs_glusterfs no such file or directory
To: Niels de Vos nde...@redhat.com
Hi All,
I am running into a strange error with samba and vfs_glusterfs.
Here is some version information:
[root@gfs-a-3 samba]# smbd -V
Version 3.6.20
[root@gfs-a-3 tmp]# glusterfsd --version
glusterfs 3.4.1 built on Oct 21 2013 09:23:23
Samba is configured in an AD environment, using winbind.
Are these sparse files? Check to see what the file allocation is vs what
the actual size is:
~# ls -lsah
-Dave
On Mon, Apr 7, 2014 at 8:53 AM, Barry Stetler ba...@hivelocity.net wrote:
I am having an issue with Gluster quotas. User is set to to 200GB and he
is using about 57 GB on mounted
We use samba VFS quite heavily in our infrastructure. Integrated with AD
via winbind, load balanced SMB front-ends based on HA with auto failover.
This system has been in production for about 4 months. So far it's worked
very well.
Dave
On Tue, Feb 11, 2014 at 11:35 AM, Matt Miller
Hi All,
I am interested in some feedback on putting multiple bricks on one physical
disk. Each brick being assigned to a different volume. Here is the scenario:
4 disks per server, 4 servers, 2x2 distribute/replicate
I would prefer to have just one volume but need to do geo-replication on
some
...@samba.org
- Original Message -
From: David Gibbons david.c.gibb...@gmail.com
To: gluster-users@gluster.org
Sent: Wednesday, October 30, 2013 11:04:49 AM
Subject: Re: [Gluster-users] Samba vfs_glusterfs Quota Support?
Thanks all for the pointers.
What version of Samba are you running
, David Gibbons wrote:
Hi All,
I'm setting up a gluster cluster that will be accessed via smb. I was
hoping that the quotas. I've configured a quota on the path itself:
# gluster volume quota gfsv0 list
path limit_set size
Thanks all for the pointers.
What version of Samba are you running?
Samba version is 3.6.9:
[root@gfs-a-1 /]# smbd -V
Version 3.6.9
Gluster version is 3.4.1 git:
[root@gfs-a-1 /]# glusterfs --version
glusterfs 3.4.1 built on Oct 21 2013 09:22:36
It should be
# gluster volume set gfsv0
Steve,
I think the best bet would be geo replication with lvm snaps:
1) Geo replicate to another gluster install on separate hardware
2) Snap the volume using lvm that you have your gluster bricks on
If you snap once a day and retain for 7 days, that should achieve your
backup need.
Cheers,
Hi All,
I'm setting up a gluster cluster that will be accessed via smb. I was
hoping that the quotas. I've configured a quota on the path itself:
# gluster volume quota gfsv0 list
path limit_set size
Hi There,
How many files are in each directory? We've seen hangs up to a few seconds
when doing a ls against a folder with 2k files in it. Lowering the number
of files per folder resolved the issue for us. From what I understand, this
is a known behavior with Gluster.
Dave
On Mon, Oct 7, 2013
Dan,
I had the same trouble yesterday. As it happens, I created a doc to help
script installs of future nodes. I did not snip out the portions that apply
to what you're looking for, but the script below works for me.
The biggest issue was that some modules were apparently installed in lib
and
it
was formatted and lost it's volume-id extended attribute. See
http://www.joejulian.name/**blog/replacing-a-brick-on-**glusterfs-340/http://www.joejulian.name/blog/replacing-a-brick-on-glusterfs-340/
Once that's fixed, on 10.250.4.65:
gluster volume start test-a force
On 08/16/2013 08:03 AM, David
with this procedure?
Cheers,
Dave
On Fri, Aug 16, 2013 at 11:03 AM, David Gibbons
david.c.gibb...@gmail.comwrote:
Ravi,
Thanks for the tips. When I run a volume status:
gluster volume status test-a
Status of volume: test-a
Gluster process PortOnline Pid
Hi There,
I'm currently testing Gluster for possible production use. I haven't been
able to find the answer to this question in the forum arch or in the public
docs. It's possible that I don't know which keywords to search for.
Here's the question (more details below): let's say that one of my
34 matches
Mail list logo
