/lib/gluster/ and create a
>>>> glusterd.info in dirctory /var/lib/glusterd/ based on peers of A node on
>>>> B node?
>>>> 2.how to sync the two bricks?Can heal full work?
>>>> 3."heal full" must be run on the node whose uuid is biggest in v
gt;>> 3."heal full" must be run on the node whose uuid is biggest in volume?
>>>
>>>
>>>
>>> Thanks,
>>> Xin
>>>
>>>
>>>
>>>
>>> At 2016-03-19 02:25:58, "Gaurav Garg" <gg...@redhat
ode (which is in good condition) execute #gluster peer status
>>>>command and copy the uuid from the peer status (you will see one failed
>>>>node entry with hostname and uuid) and replace this UUID in node file
>>>>/var/lib/glusterd/glusterd.info
>>>
>>Regards,
>>Gaurav
>>
>>----- Original Message -
>>From: "songxin" <songxin_1...@126.com>
>>To: "Gaurav Garg" <gg...@redhat.com>
>>Cc: "gluster-user" <gluster-users@gluster.org>, "Al
Thank you very much for your reply.
In fact it is that I use a new node ,of which rootfs is new , to replace the
failed node.
And the new node has same IP address with the failed one.
The brick is on a external hard disk.Because the hard disk is mounted on the
node ，so the data on the brick
new node.
>6) your volume will recover.
>>
>above steps are mandatory steps to recover failed node.
>
>Thanks,
>
>Regards,
>Gaurav
>
>- Original Message -
>From: "songxin" <songxin_1...@126.com>
>To: "Alastair Neil" <ajneil.
---
From: "songxin" <songxin_1...@126.com>
To: "Alastair Neil" <ajneil.t...@gmail.com>
Cc: gluster-users@gluster.org
Sent: Thursday, March 17, 2016 8:56:58 AM
Subject: Re: [Gluster-users] How to recover after one node breakdown
Thank you very much for your reply.
In
---
From: "songxin" <songxin_1...@126.com>
To: "Alastair Neil" <ajneil.t...@gmail.com>
Cc: gluster-users@gluster.org
Sent: Thursday, March 17, 2016 8:56:58 AM
Subject: Re: [Gluster-users] How to recover after one node breakdown
Thank you very much for your reply.
In
hopefully you have a back up of /var/lib/glusterd/glusterd.info and
/var/lib/glusterd/peers, if so I think you can copy them back to and
restart glusterd and the volume info should get populated from the other
node. If not you can probably reconstruct these from these files on the
other node.
Hi,
Now I face a problem.
Reproduc step is as below.
1.I create a replicate volume using two brick on two board
2.start the volume
3.one board is breakdown and all
files in the rootfs ,including /var/lib/glusterd/*,are lost.
4.reboot the board and ip is not change.
My question:
How to recovery
ile with having uuid of 1st node and hostname of 1st
>>node.
>>5) now start glusterd on new node.
>>6) your volume will recover.
>>>
>>above steps are mandatory steps to recover failed node.
>>
>>Thanks,
>>
>>Regards,
>>Gaurav
>&g
11 matches
Mail list logo
