Hi,
sorry for disturbing you again. I met another problem using GlusterFS.
I have several machines with CentOs 7.2 and RDMA hardware and software
installed. And I can confirm RDMA works well on these machines.
I yum -y install glusterfs-rdma and glusterfs-server, and sta
Thank you very much!
I have found the reason with the help of your advice.
I check the log carefully and thoroughly, and found the cause of the failure
is the server node can not connect the other peer ones because of DNS
resolution.
After I configured the "IP hostnames” to /etc/hosts
It works
Hi,
The rebalance could have failed because of any one of several reasons. You
would need to check the rebalance log for the volume to figure out why it
failed in this case. This should be /var/log/glusterfs/data-rebalance.log
on bigdata-dlp-server00.xg01.
I can take a look at the log if you send
Adding gluster-users, developers who work on distribute module of gluster.
On Fri, May 19, 2017 at 12:58 PM, 郭鸿岩(基础平台部)
wrote:
> Hello,
>
> I am a user of Gluster 3.8 from beijing, China.
> I met a problem. I added a brick to a volume, but the brick is on
> the / disk, the same