Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-05 Thread Mark Abraham
On Tue, Nov 5, 2013 at 12:55 PM, James Starlight wrote:

> Dear Richard,
>
>
> 1)  mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test
> gave me performance about 25ns/day for the explicit solved system consisted
> of 68k atoms (charmm ff. 1.0 cutoofs)
>
> gaves slightly worse performation in comparison to the 1)
>
>
Richard suggested

mdrun -ntmpi 2 -ntomp 6 -gpu_id 01 -v  -deffnm md_CaM_test,

which looks correct to me. -ntomp 6 is probably superfluous

Mark


> finally
>
> 3) mdrun -deffnm md_CaM_test
> running in the same regime as in the 2) so its also gave me 22ns/day for
> the same system.
>
> How the efficacy of using of dual-GPUs could be increased?
>
> James
>
>
> 2013/11/5 Richard Broadbent 
>
> > Dear James,
> >
> >
> > On 05/11/13 11:16, James Starlight wrote:
> >
> >> My suggestions:
> >>
> >> 1) During compilstion using -march=corei7-avx-i I have obtained error
> that
> >> somethng now found ( sorry I didnt save log) so I compile gromacs
> without
> >> this flag
> >>
> >> 2) I have twice as better performance using just 1 gpu by means of
> >>
> >> mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test
> >>
> >> than using of both gpus
> >>
> >> mdrun -ntmpi 2 -ntomp 12 -gpu_id 01 -v  -deffnm md_CaM_test
> >>
> >> in the last case I have obtained warning
> >>
> >> WARNING: Oversubscribing the available 12 logical CPU cores with 24
> >> threads.
> >>   This will cause considerable performance loss!
> >>
> >>  here you are requesting 2 thread mpi processes each with 12 openmp
> > threads, hence a total of 24 threads however even with hyper threading
> > enabled there are only 12 threads on your machine. Therefore, only
> allocate
> > 12. Try
> >
> > mdrun -ntmpi 2 -ntomp 6 -gpu_id 01 -v  -deffnm md_CaM_test
> >
> > or even
> >
> > mdrun -v  -deffnm md_CaM_test
> >
> > I believe it should autodetect the GPUs and run accordingly for details
> of
> > how to use gromacs with mpi/thread mpi openmp and GPUs see
> >
> > http://www.gromacs.org/Documentation/Acceleration_and_parallelization
> >
> > Which describes how to use these systems
> >
> > Richard
> >
> >
> >  How it could be fixed?
> >> All gpu are recognized correctly
> >>
> >>
> >> 2 GPUs detected:
> >>#0: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
> >> compatible
> >>#1: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
> >> compatible
> >>
> >>
> >> James
> >>
> >>
> >> 2013/11/4 Szilárd Páll 
> >>
> >>  You can use the "-march=native" flag with gcc to optimize for the CPU
> >>> your are building on or e.g. -march=corei7-avx-i for Intel Ivy Bridge
> >>> CPUs.
> >>> --
> >>> Szilárd Páll
> >>>
> >>>
> >>> On Mon, Nov 4, 2013 at 12:37 PM, James Starlight <
> [email protected]
> >>> >
> >>> wrote:
> >>>
>  Szilárd, thanks for suggestion!
> 
>  What kind of CPU optimisation should I take into account assumint that
> 
> >>> I'm
> >>>
>  using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as
>  12
>  nodes in Debian).
> 
>  James
> 
> 
>  2013/11/4 Szilárd Páll 
> 
>   That should be enough. You may want to use the -march (or equivalent)
> > compiler flag for CPU optimization.
> >
> > Cheers,
> > --
> > Szilárd Páll
> >
> >
> > On Sun, Nov 3, 2013 at 10:01 AM, James Starlight <
> >
>  [email protected]>
> >>>
>  wrote:
> >
> >> Dear Gromacs Users!
> >>
> >> I'd like to compile lattest 4.6 Gromacs with native GPU supporting
> on
> >>
> > my
> >>>
>  i7
> >
> >> cpu with dual GeForces Titans gpu mounted. With this config I'd like
> >>
> > to
> >>>
>  perform simulations using cpu as well as both gpus simultaneously.
> >>
> >> What flags besides
> >>
> >> cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
> >>
> >>
> >> should I define to CMAKE for compiling optimized gromacs on such
> >>
> > workstation?
> >
> >>
> >>
> >> Thanks for help
> >>
> >> James
> >> --
> >> gmx-users mailing [email protected]
> >> http://lists.gromacs.org/mailman/listinfo/gmx-users
> >> * Please search the archive at
> >>
> > http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> >
> >> * Please don't post (un)subscribe requests to the list. Use the
> >> www interface or send it to [email protected].
> >> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> >>
> > --
> > gmx-users mailing [email protected]
> > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > * Please search the archive at
> > http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > * Please don't post (un)subscribe requests to the list. Use the
> > www interface or send it to [email protected].
> > * Can't post? Read 

Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-05 Thread James Starlight
Dear Richard,


1)  mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test
gave me performance about 25ns/day for the explicit solved system consisted
of 68k atoms (charmm ff. 1.0 cutoofs)

gaves slightly worse performation in comparison to the 1)

finally

3) mdrun -deffnm md_CaM_test
running in the same regime as in the 2) so its also gave me 22ns/day for
the same system.

How the efficacy of using of dual-GPUs could be increased?

James


2013/11/5 Richard Broadbent 

> Dear James,
>
>
> On 05/11/13 11:16, James Starlight wrote:
>
>> My suggestions:
>>
>> 1) During compilstion using -march=corei7-avx-i I have obtained error that
>> somethng now found ( sorry I didnt save log) so I compile gromacs without
>> this flag
>>
>> 2) I have twice as better performance using just 1 gpu by means of
>>
>> mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test
>>
>> than using of both gpus
>>
>> mdrun -ntmpi 2 -ntomp 12 -gpu_id 01 -v  -deffnm md_CaM_test
>>
>> in the last case I have obtained warning
>>
>> WARNING: Oversubscribing the available 12 logical CPU cores with 24
>> threads.
>>   This will cause considerable performance loss!
>>
>>  here you are requesting 2 thread mpi processes each with 12 openmp
> threads, hence a total of 24 threads however even with hyper threading
> enabled there are only 12 threads on your machine. Therefore, only allocate
> 12. Try
>
> mdrun -ntmpi 2 -ntomp 6 -gpu_id 01 -v  -deffnm md_CaM_test
>
> or even
>
> mdrun -v  -deffnm md_CaM_test
>
> I believe it should autodetect the GPUs and run accordingly for details of
> how to use gromacs with mpi/thread mpi openmp and GPUs see
>
> http://www.gromacs.org/Documentation/Acceleration_and_parallelization
>
> Which describes how to use these systems
>
> Richard
>
>
>  How it could be fixed?
>> All gpu are recognized correctly
>>
>>
>> 2 GPUs detected:
>>#0: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
>> compatible
>>#1: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
>> compatible
>>
>>
>> James
>>
>>
>> 2013/11/4 Szilárd Páll 
>>
>>  You can use the "-march=native" flag with gcc to optimize for the CPU
>>> your are building on or e.g. -march=corei7-avx-i for Intel Ivy Bridge
>>> CPUs.
>>> --
>>> Szilárd Páll
>>>
>>>
>>> On Mon, Nov 4, 2013 at 12:37 PM, James Starlight >> >
>>> wrote:
>>>
 Szilárd, thanks for suggestion!

 What kind of CPU optimisation should I take into account assumint that

>>> I'm
>>>
 using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as
 12
 nodes in Debian).

 James


 2013/11/4 Szilárd Páll 

  That should be enough. You may want to use the -march (or equivalent)
> compiler flag for CPU optimization.
>
> Cheers,
> --
> Szilárd Páll
>
>
> On Sun, Nov 3, 2013 at 10:01 AM, James Starlight <
>
 [email protected]>
>>>
 wrote:
>
>> Dear Gromacs Users!
>>
>> I'd like to compile lattest 4.6 Gromacs with native GPU supporting on
>>
> my
>>>
 i7
>
>> cpu with dual GeForces Titans gpu mounted. With this config I'd like
>>
> to
>>>
 perform simulations using cpu as well as both gpus simultaneously.
>>
>> What flags besides
>>
>> cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
>>
>>
>> should I define to CMAKE for compiling optimized gromacs on such
>>
> workstation?
>
>>
>>
>> Thanks for help
>>
>> James
>> --
>> gmx-users mailing [email protected]
>> http://lists.gromacs.org/mailman/listinfo/gmx-users
>> * Please search the archive at
>>
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>
>> * Please don't post (un)subscribe requests to the list. Use the
>> www interface or send it to [email protected].
>> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>
> --
> gmx-users mailing [email protected]
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to [email protected].
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
>  --
 gmx-users mailing [email protected]
 http://lists.gromacs.org/mailman/listinfo/gmx-users
 * Please search the archive at

>>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>>>
 * Please don't post (un)subscribe requests to the list. Use the
 www interface or send it to [email protected].
 * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists

>>> --
>>> gmx-users mailing [email protected]
>>> 

Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-05 Thread Richard Broadbent

Dear James,

On 05/11/13 11:16, James Starlight wrote:

My suggestions:

1) During compilstion using -march=corei7-avx-i I have obtained error that
somethng now found ( sorry I didnt save log) so I compile gromacs without
this flag

2) I have twice as better performance using just 1 gpu by means of

mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test

than using of both gpus

mdrun -ntmpi 2 -ntomp 12 -gpu_id 01 -v  -deffnm md_CaM_test

in the last case I have obtained warning

WARNING: Oversubscribing the available 12 logical CPU cores with 24 threads.
  This will cause considerable performance loss!

here you are requesting 2 thread mpi processes each with 12 openmp 
threads, hence a total of 24 threads however even with hyper threading 
enabled there are only 12 threads on your machine. Therefore, only 
allocate 12. Try


mdrun -ntmpi 2 -ntomp 6 -gpu_id 01 -v  -deffnm md_CaM_test

or even

mdrun -v  -deffnm md_CaM_test

I believe it should autodetect the GPUs and run accordingly for details 
of how to use gromacs with mpi/thread mpi openmp and GPUs see


http://www.gromacs.org/Documentation/Acceleration_and_parallelization

Which describes how to use these systems

Richard


How it could be fixed?
All gpu are recognized correctly


2 GPUs detected:
   #0: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
compatible
   #1: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
compatible


James


2013/11/4 Szilárd Páll 


You can use the "-march=native" flag with gcc to optimize for the CPU
your are building on or e.g. -march=corei7-avx-i for Intel Ivy Bridge
CPUs.
--
Szilárd Páll


On Mon, Nov 4, 2013 at 12:37 PM, James Starlight 
wrote:

Szilárd, thanks for suggestion!

What kind of CPU optimisation should I take into account assumint that

I'm

using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as 12
nodes in Debian).

James


2013/11/4 Szilárd Páll 


That should be enough. You may want to use the -march (or equivalent)
compiler flag for CPU optimization.

Cheers,
--
Szilárd Páll


On Sun, Nov 3, 2013 at 10:01 AM, James Starlight <

[email protected]>

wrote:

Dear Gromacs Users!

I'd like to compile lattest 4.6 Gromacs with native GPU supporting on

my

i7

cpu with dual GeForces Titans gpu mounted. With this config I'd like

to

perform simulations using cpu as well as both gpus simultaneously.

What flags besides

cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5


should I define to CMAKE for compiling optimized gromacs on such

workstation?



Thanks for help

James
--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at

http://www.gromacs.org/Support/Mailing_Lists/Search before posting!

* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists

--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at

http://www.gromacs.org/Support/Mailing_Lists/Search before posting!

* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists

--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the 
www interface or send it to [email protected].

* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-05 Thread James Starlight
My suggestions:

1) During compilstion using -march=corei7-avx-i I have obtained error that
somethng now found ( sorry I didnt save log) so I compile gromacs without
this flag

2) I have twice as better performance using just 1 gpu by means of

mdrun -ntmpi 1 -ntomp 12 -gpu_id 0 -v  -deffnm md_CaM_test

than using of both gpus

mdrun -ntmpi 2 -ntomp 12 -gpu_id 01 -v  -deffnm md_CaM_test

in the last case I have obtained warning

WARNING: Oversubscribing the available 12 logical CPU cores with 24 threads.
 This will cause considerable performance loss!

How it could be fixed?
All gpu are recognized correctly


2 GPUs detected:
  #0: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
compatible
  #1: NVIDIA GeForce GTX TITAN, compute cap.: 3.5, ECC:  no, stat:
compatible


James


2013/11/4 Szilárd Páll 

> You can use the "-march=native" flag with gcc to optimize for the CPU
> your are building on or e.g. -march=corei7-avx-i for Intel Ivy Bridge
> CPUs.
> --
> Szilárd Páll
>
>
> On Mon, Nov 4, 2013 at 12:37 PM, James Starlight 
> wrote:
> > Szilárd, thanks for suggestion!
> >
> > What kind of CPU optimisation should I take into account assumint that
> I'm
> > using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as 12
> > nodes in Debian).
> >
> > James
> >
> >
> > 2013/11/4 Szilárd Páll 
> >
> >> That should be enough. You may want to use the -march (or equivalent)
> >> compiler flag for CPU optimization.
> >>
> >> Cheers,
> >> --
> >> Szilárd Páll
> >>
> >>
> >> On Sun, Nov 3, 2013 at 10:01 AM, James Starlight <
> [email protected]>
> >> wrote:
> >> > Dear Gromacs Users!
> >> >
> >> > I'd like to compile lattest 4.6 Gromacs with native GPU supporting on
> my
> >> i7
> >> > cpu with dual GeForces Titans gpu mounted. With this config I'd like
> to
> >> > perform simulations using cpu as well as both gpus simultaneously.
> >> >
> >> > What flags besides
> >> >
> >> > cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
> >> >
> >> >
> >> > should I define to CMAKE for compiling optimized gromacs on such
> >> workstation?
> >> >
> >> >
> >> > Thanks for help
> >> >
> >> > James
> >> > --
> >> > gmx-users mailing [email protected]
> >> > http://lists.gromacs.org/mailman/listinfo/gmx-users
> >> > * Please search the archive at
> >> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> >> > * Please don't post (un)subscribe requests to the list. Use the
> >> > www interface or send it to [email protected].
> >> > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> >> --
> >> gmx-users mailing [email protected]
> >> http://lists.gromacs.org/mailman/listinfo/gmx-users
> >> * Please search the archive at
> >> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> >> * Please don't post (un)subscribe requests to the list. Use the
> >> www interface or send it to [email protected].
> >> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> >>
> > --
> > gmx-users mailing [email protected]
> > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > * Please don't post (un)subscribe requests to the list. Use the
> > www interface or send it to [email protected].
> > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> --
> gmx-users mailing [email protected]
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to [email protected].
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-04 Thread Szilárd Páll
You can use the "-march=native" flag with gcc to optimize for the CPU
your are building on or e.g. -march=corei7-avx-i for Intel Ivy Bridge
CPUs.
--
Szilárd Páll


On Mon, Nov 4, 2013 at 12:37 PM, James Starlight  wrote:
> Szilárd, thanks for suggestion!
>
> What kind of CPU optimisation should I take into account assumint that I'm
> using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as 12
> nodes in Debian).
>
> James
>
>
> 2013/11/4 Szilárd Páll 
>
>> That should be enough. You may want to use the -march (or equivalent)
>> compiler flag for CPU optimization.
>>
>> Cheers,
>> --
>> Szilárd Páll
>>
>>
>> On Sun, Nov 3, 2013 at 10:01 AM, James Starlight 
>> wrote:
>> > Dear Gromacs Users!
>> >
>> > I'd like to compile lattest 4.6 Gromacs with native GPU supporting on my
>> i7
>> > cpu with dual GeForces Titans gpu mounted. With this config I'd like to
>> > perform simulations using cpu as well as both gpus simultaneously.
>> >
>> > What flags besides
>> >
>> > cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
>> >
>> >
>> > should I define to CMAKE for compiling optimized gromacs on such
>> workstation?
>> >
>> >
>> > Thanks for help
>> >
>> > James
>> > --
>> > gmx-users mailing [email protected]
>> > http://lists.gromacs.org/mailman/listinfo/gmx-users
>> > * Please search the archive at
>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>> > * Please don't post (un)subscribe requests to the list. Use the
>> > www interface or send it to [email protected].
>> > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>> --
>> gmx-users mailing [email protected]
>> http://lists.gromacs.org/mailman/listinfo/gmx-users
>> * Please search the archive at
>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>> * Please don't post (un)subscribe requests to the list. Use the
>> www interface or send it to [email protected].
>> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>
> --
> gmx-users mailing [email protected]
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at 
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to [email protected].
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-04 Thread James Starlight
Szilárd, thanks for suggestion!

What kind of CPU optimisation should I take into account assumint that I'm
using dual-GPU Nvidia TITAN workstation with 6 cores i7 (recognized as 12
nodes in Debian).

James


2013/11/4 Szilárd Páll 

> That should be enough. You may want to use the -march (or equivalent)
> compiler flag for CPU optimization.
>
> Cheers,
> --
> Szilárd Páll
>
>
> On Sun, Nov 3, 2013 at 10:01 AM, James Starlight 
> wrote:
> > Dear Gromacs Users!
> >
> > I'd like to compile lattest 4.6 Gromacs with native GPU supporting on my
> i7
> > cpu with dual GeForces Titans gpu mounted. With this config I'd like to
> > perform simulations using cpu as well as both gpus simultaneously.
> >
> > What flags besides
> >
> > cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
> >
> >
> > should I define to CMAKE for compiling optimized gromacs on such
> workstation?
> >
> >
> > Thanks for help
> >
> > James
> > --
> > gmx-users mailing [email protected]
> > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > * Please don't post (un)subscribe requests to the list. Use the
> > www interface or send it to [email protected].
> > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> --
> gmx-users mailing [email protected]
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to [email protected].
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


Re: [gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-04 Thread Szilárd Páll
That should be enough. You may want to use the -march (or equivalent)
compiler flag for CPU optimization.

Cheers,
--
Szilárd Páll


On Sun, Nov 3, 2013 at 10:01 AM, James Starlight  wrote:
> Dear Gromacs Users!
>
> I'd like to compile lattest 4.6 Gromacs with native GPU supporting on my i7
> cpu with dual GeForces Titans gpu mounted. With this config I'd like to
> perform simulations using cpu as well as both gpus simultaneously.
>
> What flags besides
>
> cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5
>
>
> should I define to CMAKE for compiling optimized gromacs on such workstation?
>
>
> Thanks for help
>
> James
> --
> gmx-users mailing [email protected]
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at 
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to [email protected].
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
--
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists


[gmx-users] Gromacs-4.6 on two Titans GPUs

2013-11-03 Thread James Starlight
Dear Gromacs Users!

I'd like to compile lattest 4.6 Gromacs with native GPU supporting on my i7
cpu with dual GeForces Titans gpu mounted. With this config I'd like to
perform simulations using cpu as well as both gpus simultaneously.

What flags besides

cmake .. -DGMX_GPU=ON -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-5.5


should I define to CMAKE for compiling optimized gromacs on such workstation?


Thanks for help

James
-- 
gmx-users mailing [email protected]
http://lists.gromacs.org/mailman/listinfo/gmx-users
* Please search the archive at 
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
* Please don't post (un)subscribe requests to the list. Use the 
www interface or send it to [email protected].
* Can't post? Read http://www.gromacs.org/Support/Mailing_Lists