I know several other places have used Nagios, and it should be in most
linux distribution repositories. I've not set up or used it myself,
but should be some tutorials around the web.
Michael
On Friday, May 4, 2018 at 1:51 PM, jsf wrote:
Hi Michael,
Can you recommend
It _would_ be interesting to capture all the SYN packets and it would be
many orders of magnitude less to capture.
On Fri, May 4, 2018 at 1:51 PM, jsf wrote:
> Hi Michael,
>
> Can you recommend a good SNMP capturing tool and a link to a setup how to?
> .. I'm really most
Hi Michael,
Can you recommend a good SNMP capturing tool and a link to a setup how to?
.. I'm really most interested in just seeing how we're doing with our
150/25 circuit and whether or not we should increase/move to fiber/move to
symmetrical...
Thanks!
Joshua
On Fri, May 4, 2018 at 1:37 PM,
Joshua,
A network tap might work if you are only looking for mirrored traffic
from one port. One thing to keep in mind is that this is full duplex
(TX & RX) so you will most likely need 2 capture interfaces + 3rd for
remote access if you need that. It might be possible to mirror a port
off
Thanks Ken,
I do have Dell switches on the other side of the firewall. I guess I could
mirror the port on the switch that is connected to the firewall (which is
connected to the modem?)
J.
On Fri, May 4, 2018 at 1:24 PM, Ken D'Ambrosio wrote:
> Hey, Joshua. Honestly, you're
Hey, Joshua. Honestly, you're "doing it wrong," for a few reasons.
* Capturing *everything* would be huge -- almost certainly fill up your
hard disk in relatively short order.
* Wireshark isn't the thing to capture it with. If you want that, dump
it using "tcpdump" (or its Windows
Hi friends,
I am IT dir. at a small independent school in CT nowadays. I have a
comcast modem. my firewall plugs into a wired port in the comcast modem.
I have an old PC running windows 8.1. I have installed wireshark on the
old PC. I have plugged the old PC's network interface into another