OK, I want to do it properly, but I had an email crash and .
So, can someone point me or send me the 'how to' for doing an end of
year process, where I can 'inherit' the names from the autocomplete from
the previous years?
Thanks, Finbar
___
OK, thanks.
You may remember (with a wince?) a long series of messages a while back
that I had 'cos I had more than one location for the G files. It was
sorted, by a kind person.
However, somewhere along the line the balance got screwed up, so I
created a subfile with the 2024 addition and
1.How to get the suggestions when creating an entry (e.g.. ) name of the
client when entering a few characters?
2. I subdivided an a/c to create a 2024 version, using the latest bank
account balance as the opening balance. All Ok, but the entries are in
red I cannot find in the help how
I 100% agree.
I know I have been a pain in the butt concerning my bad habits in saving
files but I am grateful for the rescues.
Best wishes for '24 to all the minders.
Finbar (Barry)
On 29/12/2023 02:02, Adrien Monteleone wrote:
I'd offer as a comparison other projects and commercial
Hi,
I am getting a message on MS 10 that Gnucash cannot install 5 because it
cannot remove files from the previous version. I have closed the
existing Gnucash and allowed the 'close' option on the install. I also
get an option to install a new gnucash file.and uninstall ran.
Finbar
expenditures in the wrong place!!
Ho hum. Thanks for the suggestion.
Barry
On 15/11/2023 23:37, Liz wrote:
On Wed, 15 Nov 2023 15:39:19 +0100
Mahon Finbar via gnucash-user wrote:
Aha, as usual you are correct Maff. I'll just have to soldier on. I
already found two deposits entered
Aha, as usual you are correct Maff. I'll just have to soldier on. I
already found two deposits entered as withdrawals.
Barry
On 13/11/2023 16:40, Maf. King wrote:
On Monday, 13 November 2023 15:20:28 GMT Mahon Finbar via gnucash-user wrote:
I set off to see where, but, in the course
Hello,
The recent discussion on reconciliation was helpful in trying to sort
out some anomalies I have.
When I do the latest reconciliation of one of my accounts the opening
balance is 10,448.43 and gives me an amount of inbalance which is way off.
Following the advice in the recent posts
FWIW, I do the same, since the insurance are not generous, I have a
'solde' to pay ;)
Finbar
On 07/11/2023 05:17, Jediator wrote:
I would use the same expense account to record refund, since the
refund reduces your medical expenses.
-- JC
On 11/6/23 10:53 PM, Andrew Gross wrote:
I have
Hello,
I have been trying to incorporate some additional elements in the
options for a report, via reports>saved report configurations.
I have read the manual content and I think I have implemented way to do
this, but so far I have not succeeded.
Could someone help? I am using the latest
Exactly my experience, and why I asked, despite previous experience.
I am now at the stage where my Gnucash file is y but my bank account is
not
Further searching needed,
Barry
On 30/10/2023 11:24, Liz wrote:
On Wed, 25 Oct 2023 15:21:20 +0200
Mahon Finbar via gnucash-user wrote:
Hi
ot;OK" button to continue.
David Cousens
On Wed, 2023-10-25 at 15:21 +0200, Mahon Finbar via gnucash-user wrote:
Hi,
After my previous experiences on here, I am almost afraid to ask a new
question, but, here goes.
When Reconciling, what exactly is the effect of introducing a "new
balance
Hi,
After my previous experiences on here, I am almost afraid to ask a new
question, but, here goes.
When Reconciling, what exactly is the effect of introducing a "new
balance entry" as is available as the first option on the bar.
There is nothing under the help that I could identify.
appear to be the
case. Also, I am not certain how much of a scrape you need, I have
screenfulls.
I aplogise for the confusion between adminstratO and adminstrator. As a
result of various ministrations to this PC when I first got it, a while
back, several names were applied, barry mahon, finbar
OK, as I answered earlier on this thread, today, I use Thunderbird as my
email software. I use it as a specific application.
"C:\Program Files (x86)\Mozilla Thunderbird\thunderbird.exe"
BTW my issues with sending attachments starts with file manage and
specifically with gnu files, don't know
Yes, good point. I use a combination of Mailwasher, a NZ originated app
which pre-examines mails to dump garbage, and Thunderbird for mail.
Thanks, Barry
On 27/08/2023 19:00, kschneider bout-tyme.net wrote:
David,
Since not everyone on this list uses the same email client as you you may need
/08/2023 12:58, Mahon Finbar via gnucash-user wrote:
Good advice, I never run as administrator, at least not knowingly.
I am on an island off the South West coast of Ireland, at this moment.
I will move on to my residence in France next week, I use this site as
my 'best option' for GNU, and so far
rator" unless you know exactly why you need to.
That is my answer.
On Sat, Aug 26, 2023, 11:02 AM Mahon Finbar via gnucash-user
wrote:
I'd say you are almost certainly right, Adrian, but.
There I was, sailing along at my usual boring, routine, data entry to
gnucash, as I
to be sent as attachements.
Pasting an in line picture doesn't show anything, it's filtered out.
HTH
Carsten
Am 25.08.23 um 10:58 schrieb Mahon Finbar via gnucash-user:
Thanks to all.
On the issue of rights, I have never had any issues before this saga,
so should I assume I have had 'rights
to a database - you are still saving to
a file named ".gnucash".
On Sat, Aug 26, 2023 at 11:02 AM Mahon Finbar via gnucash-user
wrote:
I'd say you are almost certainly right, Adrian, but.
There I was, sailing along at my usual boring, routine, data entry to
gnuc
Sorry for any ignorance, but logged in to what or where? I get a splash
screen with Mahon Finbar (my 'official,as on cheques) name on my
(Lenovo) PC and a password.
Barry
On 27/08/2023 11:08, Adrien Monteleone wrote:
When you open that file (or any file) located in the 'administrato'
users
I'd say you are almost certainly right, Adrian, but.
There I was, sailing along at my usual boring, routine, data entry to
gnucash, as I have done since 2019.
On entering a transaction I got the message I have copied several times,
that I don't have rights or space to save the
/write rights for all those files so you no longer need
administrator rights. I am not a Windows guru so I may have
overlooked some details to warn you about. Good luck.
On Thu, Aug 24, 2023 at 12:47 PM Mahon Finbar via gnucash-user
wrote:
Thanks for the details, OK, here goes.
I
a test txn in and try to save it.
Good luck
Maf.
On Thursday, 24 August 2023 16:14:26 BST Mahon Finbar via gnucash-user wrote:
This is an update of sorts of a long series of messages here since I had
an issue with saving my transactions at the end of July.
I was unable to copy and send
ost recent date stamp in the name,
move it into a new folder, call it something sensible and open it. see what
transactions GC says is there. Add a test txn in and try to save it.
Good luck
Maf.
On Thursday, 24 August 2023 16:14:26 BST Mahon Finbar via gnucash-user wrote:
This is an updat
This is an update of sorts of a long series of messages here since I had
an issue with saving my transactions at the end of July.
I was unable to copy and send GNU files to the kind people who tried to
help me. I have no idea why, copy and paste after changing to the file
type required just
Apropos, the whole issue ofthehistory of the GNU files, I have been
having a lot of problems trying to get the into a fo that can be senton
here here. There are so many files with very small differences it seems
to "confuse" cutting and pasting.
Could I suggest I try saving individually GNU
on your system! (one is
"Barry Mahon" and the other is "administrato")
Regards,
Adrien
On 8/10/23 2:59 AM, Mahon Finbar via gnucash-user wrote:
OH, I now find the Tax Account folder has been deleted. I have no
recollection, but it must have happened.
I'll go through the backu
)
And what do you *think* its file name is supposed to be? (just the
file name here is fine)
And for completeness, can you trigger that 'cannot write to file'
warning that you originally reported, and send us a screenshot?
Thanks.
Regards,
Adrien
On 8/7/23 10:56 AM, Mahon Finbar via gnucash
C:\users\administrato\documents is where the only one which "fits" i.e.
where GNU FEB 12 2019.gnucash is. There are literally hundreds of others
On 07/08/2023 17:33, David Carlson wrote:
What is the complete path/filename for the files?
On Mon, Aug 7, 2023, 10:04 AM Mahon Finbar v
creating the proper . versions for uploading.
'save as' doesn't seem to be working.
Barry
On 07/08/2023 13:17, Michael Hendry wrote:
On 7 Aug 2023, at 10:46, Mahon Finbar via gnucash-user
wrote:
OK, lets try to get to the bottom of this.
When I say I have had issues, I am unaware that I
BTW, forgot to mention, the date of the last transaction in the file
that I mentioned that opens, is in 2022!!
I certainly have been updating my records since then.
Barry
On 06/08/2023 18:12, Adrien Monteleone wrote:
On 8/6/23 6:23 AM, Mahon Finbar via gnucash-user wrote:
Quite correct
/2023 18:12, Adrien Monteleone wrote:
On 8/6/23 6:23 AM, Mahon Finbar via gnucash-user wrote:
Quite correct
For a very long time I have had an issue that when I click the app,
it loads, but after the perl stuff it says"cannot find the file -
open anyway?"
The lock file message o
Is this what you need??
Barry
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription preferences or to unsubscribe:
https://lists.gnucash.org/mailman/listinfo/gnucash-user
-
Please remember to CC this list on all your
Quite correct
For a very long time I have had an issue that when I click the app, it
loads, but after the perl stuff it says"cannot find the file - open
anyway?" From time to time, seemingly randomly, it opens the (presumably
last used) file and away I go. I am always careful, because of
GNU FEB 12 2019.gnucash.20210219151108.gnucash.LCK
I did a restart of the pc and did the search again for .lck and this is
is what I get.
It is marked modified on 1.03.2021, type LCK file, 0 KB
Further mystery. I appreciate your request to slow down, and I want to,
but the sequence of
Hello again,
After removing, renaming etc. the "offending file" as described, I now
have a screen with 'unsaved book' which doesn't react to the 'close' option.
This appeared after a text box which said that the original offending
file was not available, it was in the 'history' did I want to
on a Mac) will trigger a Save.
As for why you can't save, if you need to, the message suggests lack
of space on the drive, or a permissions issue. We don't yet have
enough information to determine which one.
Regards,
Adrien
On 7/29/23 2:28 AM, Mahon Finbar via gnucash-user wrote:
Since you asked
are using the default.
Otherwise, usually a CTRL+S (CMD+S on a Mac) will trigger a Save.
As for why you can't save, if you need to, the message suggests lack
of space on the drive, or a permissions issue. We don't yet have
enough information to determine which one.
Regards,
Adrien
On 7/29/23 2:28
54, Adrien Monteleone wrote:
Do you have enough disk space as the message suggests?
The 'file' is a report? What *exactly* were you trying to do when you
got the message?
Regards,
Adrien
On 7/26/23 5:29 AM, Mahon Finbar via gnucash-user wrote:
I have a message -
"Could not write to file C
file?
How can I eliminate it??.
Sorry.
Barry
On 26/07/2023 20:54, Adrien Monteleone wrote:
Do you have enough disk space as the message suggests?
The 'file' is a report? What *exactly* were you trying to do when you
got the message?
Regards,
Adrien
On 7/26/23 5:29 AM, Mahon Finbar
I have a message -
"Could not write to file C: xxx check that you have permission to
write to this file and there is sufficient space to create it"
The file is a report of annual P that I have open , but I am not
working on it
What is the problem??
Thanks Barry
OK, a little nit picky? but whatever rows your boat. I just need the
detail for the taxman once a year, he doesn't deserve a PDF
Delighted with the responses, bully for Gnucasha fabulous app and
services.
Finbar
On 13/02/2023 17:39, Adrien Monteleone wrote:
I do the same. I have
:
On Sat, 11 Feb 2023 at 11:28, Mahon Finbar wrote:
[...]
My issue is to establish which report is which, if possible, by
re-creating the title with the dates of the periods covered. Then I can
eliminate any dupes, etc.
Try this:
1. Open Reports -> Saved Report Configurations and sel
.
Barry
On 10/02/2023 20:04, ed...@billiau.net wrote:
On Fri, 10 Feb 2023 17:28:04 +0100
Mahon Finbar wrote:
However, it doesn't seem to work, I now have a list of 'saved report
configurations' from those terminating with no number at all to 21,
all called profit & loss, in a sort of ra
OK, here we go again, my last query on here produced zero
responses,never mind.
Now, I am trying to rationalise my Report Configurations.
Under reports>saved report configurations I have a mish mash of titles
and dates of reports.
I have tried the "help" suggested change of name by locating
Hi,
I bet this has been asked before, but just in case
Is it possible, anywhere, to create a history of actions, or
transactions, or anything?
Thanks, Barry
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription
Hi,
I have an account for a savings a/c and I want to add the latest
interest entry. However, when I click the entry title it open with the
balance, but when I add the interest it fills in the amount as an
addition and then a subtraction and the balance doesn't change
Have a the wrong
On Dec 19, 2022, at 8:35 AM, Murugan Muruganandam
wrote:
i was able to download from github and install the same
Saludos Cordiales
Murugan
From: gnucash-user on
behalf of Mahon Finbar
Sent: Monday, December 19, 2022 12:50 PM
To: gnucash-user@gnucash.org
Sourceforge doesn't have 4.13
Barry
On 18/12/2022 23:07, John Ralls wrote:
The GnuCash development team announces GnuCash 4.13, the fourteenth release in
the stable 4.x series
Between 4.12 and 4.13, the following bugfixes were accomplished:
• Bug 760274 - The Statusbar "forgets"
"This is essentially a 'reversing' transaction. (which you could enter
manually, or via Transaction > Add reversing transaction, with the
original expense transaction selected)"
Aha, the solution, thank you so much, and it works just fine when you
enter the date the reimbursement was received
:19, Liz Dodd wrote:
On Mon, 12 Dec 2022 15:44:49 +
Mahon Finbar wrote:
Another possibility?
In March 2021 I was reimbursed 1,340.98 by an airline for a trip to
Japan which was cancelled due to Covid.
In error I entered the reimbursement against my credit card, although
I had paid it from my
ate an over-payment to the card company.
Regards,
Adrien
On 12/11/22 8:58 AM, Mahon Finbar wrote:
That is what I do, so why am I getting an increased -ve balance in
the balance column, like this?
or this?
the bank account entry looks like this, under the 'payments out and
p
that is already set, and you see a negative balance for *any*
account, then that account currently has a 'contra-balance', that is,
a balance opposite of its normal state. In this case, it would
indicate an over-payment to the card company.
Regards,
Adrien
On 12/11/22 8:58 AM, Mahon Finbar wro
That is what I do, so why am I getting an increased -ve balance in the
balance column, like this?
or this?
the bank account entry looks like this, under the 'payments out and
payments in' columns
??
On 11/12/2022 12:19, Fred Bone wrote:
On 11 December 2022 at 12:03, Mahon Finbar said
in the wrong place?
Thanks
On 09/12/2022 17:17, Fred Bone wrote:
On 09 December 2022 at 15:58, Mahon Finbar said:
Hi,
I am sure this is explained somewhere, but I haven't been able to find a
simple explanation.
I have a register of transactions in an a/c called credit card.
I enter the data
Hi,
I am sure this is explained somewhere, but I haven't been able to find a
simple explanation.
I have a register of transactions in an a/c called credit card.
I enter the data from the monthly statement, allocating them to various
expenses and enter the monthly payment from a bank account.
Saved Report
Configurations. You'll then get a pop-up with a list of your saved
configurations. Select the one you want, but you might still have to
adjust some options properly.
Regards,
Adrien
On 10/6/22 1:03 PM, Mahon Finbar wrote:
Hello,
I have saved the report configurations for my annual
Hello,
I have saved the report configurations for my annual P over the years,
or I thought I had.
It being the time I should make my annual tax return I went looking for
the configuration for 2021 that I had started and found -
but when I selected and clicked the 2021 one I get -
Etc,
In the guide the assumptions seem to be US based??
For example I have one of my share which is quoted on the Israel Stock
Exchange, and others on the Irish, UK, etc.
How do I get those in? Another neophyte question.
Finbar
___
gnucash-user
Thank you for the information/advice.
Yes, just the information. I have an asset a/cw ith some of the data but
it is showing increase and decrease and value in an 'overall' format,
i.e. on the status of the whole a/c, not on the individual items. I do
need dividend data for tax purposes.
I
Hello,
I am trying to rationalise my shares (or things that have a moving
value) holdings.
I understand the basics of GNU, in that I have been a user for some
time and have been able to record transactions, create reports to
satisfy the taxman, etc., but I keep getting bits and pieces of
I have seen the various replies, and agree. I don't see icons on my
screens, I see words like 'file', etc. are we reading the same software?
I want to take this opportunity to thank all those who take the time and
effort to answer remarks on here, some are queries, all are treated fairly.
. That should help.
On Thu, Feb 17, 2022, 9:02 AM Mahon Finbar wrote:
True, but since I don't know where the error is, I thought of
doing it
per month, and that way finding it.
That is why I need to find a way to display the reconciled
transactions
on a month by month basis
mailto:gmccol...@gyleshomes.com>email
*From:* gnucash-user
on behalf of Mahon
Finbar
*Sent:* Wednesday, February 16, 2022 9:05 AM
*To:* Gnucash Users
*Subject:* [GNC] Selecting older transactions to unreconcile
End of yea
End of year issue.
I have reconciled most of 2021 but inevitably I have subsequently found
a few errors.
So, I want to select a reconcile date and then "unreconcile" some
transactions.
I assumed using the suggested ctrl-A and spacebar technique would enable
me to do it using a date I
OK, I get that now, I thought I should register it under "gifts" a debit
headline. but it is better under 'gifts received'
Thanks
On 17/01/2022 18:09, Derek Atkins wrote:
Hi,
On Mon, January 17, 2022 10:51 am, Mahon Finbar wrote:
Hi,
My wife got a cheque (or check if you insist)
Hi,
My wife got a cheque (or check if you insist) and lodged it in her bank
account.
I want to enter it as a deposit to her a/c. It only seems to accept
Assets:Current Assets:Cash in Wallet as a transfer entry without
entering two transactions - deposit and withdrawal
Since the amount
t doesn't match, or in
fact if it does, then mark it as reconciled.
If ALL transactions are reconciled that doesn't mean your balances are
0.00, it just means that whatever the balance happens to be, you have
verified it to be correct.
Regards,
Adrien
On 12/24/21 9:07 AM, Mahon Finbar wrote:
Hap
Happy Holidays,
Not wanting to ruin your festivities, but where is the best place to
find help, and advice on rectifying reconciliations.
Is see there is a way to "unreconcile" a selection, but I don't
understand what the effect is or why to do it. For example I can maybe
unreconcile to
Oh, does that work? It is a standard MS way of doing it but I never
tried in Gnucash.
Thanks
On 02/12/2021 17:22, Kalpesh Patel wrote:
Just in case need details, this is what I do:
Go to first row and then hold the [shift] key while clicking the last row to
select a range that I want to
Ditto here, I haven't found any way in Gnu of 'marking' text for delete.
Probably a good idea, the forensic accountants on here would never
accept it
Also ditto for the page at a time proposal. It is a complete bummer when
you reconcile a biggish sequence of transactions and find you are
Agreed wholeheartedly. Is it not time that there would be some way of
sorting of the messages.
There is no doubt that the gnucash-user service is fantastic when you
have an issue but it gets a little tedious when the inbox is clogged
with strings of messages from the cognoscenti about rather
+1
On 28/06/2021 03:29, Stan Brown wrote:
On 2021-06-27 14:51, John Ralls wrote:
The GnuCash development team announces GnuCash 4.6, the sixth release in the
stable 4.x series
Between 4.5 and 4.6, the following bugfixes were accomplished:
...
It's change logs like this that remind me what a
All very understandable. It has always intrigued me how accountants deal
with 'late payments' i.e. bills paid after the close of the year. If I
understand the discussion, ongoing (accrual based) businesses are always
behind when it comes to an analysis of the state of play, unless all
invoices
can't automate this you can easily create a manual transaction
each month or week when you reconcile your account.
Kind regards Ove
On Mon, 3 May 2021, 15:54 Derek Atkins, <mailto:de...@ihtfp.com>> wrote:
Hi,
On Mon, May 3, 2021 9:40 am, Mahon Finbar wrote:
> Hi,
Hi,
I am sure this has come up beforebut.
Reconciling an account - I have a starting balance of €x,xxx.xx and an
ending balance from the date of the latest bank statement of €x,xxx.xx.
So far so good. I have checked the entries in the a/c and all are either
R or c. I have also
Yes, I have found both, transactions 'out of order' and balance not
'correct'
I usually find that I made a booboo in an entry or duplicated one or
wrong date/year
To be honest, even after checking there is often a few centimes
difference but I don't let it bother me. Life is too
Thanks both.
Thanks for the 'accounting' way of doing it and I will try some of the
proposals.
My case is a little bit different; just to clarify - I pay a fixed
amount per month, as many utilities suppliers offer, but, my supplier
cannot (yet) handle the reduction from a government
Hi,
I get reimbursed a certain amount of electricity costs each month, as a
separate transaction in to my bank a/c. I enter them as
income:reimbursement in the gnucash transaction.
However, nothing appears in my P report under 'reimbursement' but if I
click on the headline in the report
I just had exactly the same issue! John Ralls and Alan Holmes provided
me with answers.
Essentially it is because your installation doesn't seem to have
'cleaned' the path when it installed the version you are using, afaics.
I was using an earlier version of GnuCash for quite a while before
Thanks both, I have it sorted more or less, it remains to tidy up the
various versions of the files that are in different locations on the PC.
I used Revo Uninstaller Pro to uninstall the 'active' version, Revo is
what I have used over the years to get rid of files which, inadvertently
backup file instead of the original.
Regards,
John Ralls
On Mar 15, 2021, at 7:13 AM, Mahon Finbar wrote:
OK, I appreciate that, thank you.
However, in trying to find the last backup file before uninstalling, I am
finding some very strange file dates and times in the list.
For example - gnucash.
so that
you can easily roll back after an update or restore more quickly after a disk
failure.
Regards,
John Ralls
On Mar 13, 2021, at 6:06 AM, Mahon Finbar wrote:
OK, I'll try that, thanks.
I have the most recent version for Windows 10, afaik. Haven't recently
downloaded any update
uninstalling GnuCash with Apps
& Settings then delete the installation directory--it defaults to C:\Program
Files (x86)\gnucash--before reinstalling GnuCash 4.4.
Regards,
John Ralls
On Mar 12, 2021, at 3:20 AM, Mahon Finbar wrote:
Oops the screen grab didn't transfer -
"the procedure en
Oops the screen grab didn't transfer -
"the procedure entry point gmc_scm_call_1_symbol_to_string could not be
located in the dll C:\programfiles(x86)\gnucash\libgncmod-app-utils.dll"
On 12/03/2021 10:52, Mahon Finbar wrote:
Sorry, sent this with the wrong email address.
A Windo
Sorry, sent this with the wrong email address.
A Windows message? Using versionW10, no recent change with Gnucash.
Needs task manager to get rid of the message.
Finbar
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your
Funny that, I got nothing from either, I was a bit surprised. Just
checked and zilch
Anyway, all is well, and thanks to you all.
Barry
On 23/02/2021 11:11, Maf. King wrote:
On Tuesday, 23 February 2021 08:43:20 GMT Mahon Finbar wrote:
Hello,
Now I realise why I got no answers.
RTFM
Hello,
Now I realise why I got no answers.
RTFM, and after quite a while reading and referring, I gor it fixed, I hope.
I still don't know why it crashed.
Thanks
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription
Hello again,
No reaction to my previous post.
The list of files under gnucash are all dated 5 Feb 2018 should
there be something more recent?
TIA for any reply
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription
Hello,
In the middle of working normally in
Version: 4.2
Build ID: 4.2+(2020-09-26)
In Windows 10 home version 1903
it crashed while entering an amount in the withdrawal column.
I restarted and it showed me a report I had created a while back and
nothing else. When I tried to open the
hat the problem was.
>
> Michael D Novack
>
>
>
> On 1/14/2021 10:45 AM, Mahon Finbar wrote:
> > Sorry for the bother, the usual end of year issue
> >
> > I have an income report in the saved report configuration with an end
> > date of 1.09.2020.
> >
Sorry for the bother, the usual end of year issue
I have an income report in the saved report configuration with an end
date of 1.09.2020.
I need to change the end date to 31.12.2020.
I thought I only needed to change the option, but it doesn't seem to be
working.
What am I doing
avast.com/sig-email?utm_medium=email_source=link_campai
gn=sig-email_content=webmail
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Tue, Nov 17, 2020 at 12:13 AM John Ralls wrote:
On Nov
Sorry, I think I posted this already in the wrong address.
Hi,
Just now I was making an entry in an account I use regularly, one of my
bank accounts. and was entering a salary cheque which required an
alteration of one figure.
It worked fine, date, description, etc., until I tried to change
I am trying it, it looks like a great trick.
It defaulted to 2020 and I picked my own bank a/c, but when I tried to
change the dates in the options I got nothing.
FWIW, Version 4.2 on Windows 10, Barry
On 27/10/2020 14:08, Christopher Lam wrote:
The experimental multicolumn reports have a
Thanks to the message from James I downloaded 4.2 for W10.
Maybe coincidentally, my Vivaldi browser crashed half way through the
download, but it restarted after restarting Vivaldi.
All OK in the end and the load is MUCH faster.
Thanks to all concerned.
Barry
On 30/09/2020 20:57, Jamestk
Hi,
Sorry to butt in, but is there an 'update' option on the 3.8 version?
Are Windows 10 users included in the 4.2 update? Most if not all of the
messages are about Linux.
Barry
On 29/09/2020 20:36, Jamestk wrote:
David Cousens, thanks
I installed GNU Cash a while ago, perhaps over a year
I have done that, but on my Lenovo W10 1903 the 'magified' text is
blurred.
I would like there to be a simple text size option under settings.
I needed, and very much appreciate, an accounting app which is not run
by money grabbers (especially accountants :-). In GNU I found it, but,
:
On Fri, Jul 3, 2020 at 8:36 AM Mahon Finbar <mailto:mahon.fin...@neuf.fr>> wrote:
I got reimbursed a sum of over €500 on my credit card account.
It seems to be causing some issues with reconciling the a/c.
I entered the amount as a 'credit card payment' The reimbursement
1 - 100 of 105 matches
Mail list logo