Please remember to reply to the mailing list, not the original sender: http://gnudip2.sourceforge.net/#mailinglist
+++++++++ I am not familiar with the NAT box you have. Sorry. I am probably also not familiar with the release of Windows you are using. The last versions of Windows I have any experience with are 98 and NT 4. I hope sincerely that I will not gain any more experience with Windows. You should not need to register any service names to Windows - gdipc does not look up service names. Just specify the port numbers. Is there a software firewall running on your Windows machine? Can wou redirect port 80 (i.e, web server) on the firewall device to port 80 on an internal machine? Brian S wrote: > > Please remember to reply to the mailing list, not the original sender: > > http://gnudip2.sourceforge.net/#mailinglist > > +++++++++ > > Thank you very much for taking the time to explain the gdipc -g option. > > Unfortunately, I am still having the same problem. > > Apparantly, my problem stems more from my inability to define the correct > firewall filter/forwarding rule rather than the gdipc configuration. > > If you have some example of how the rule needs to be set up to do the > correct forwarding, I would really appreciate it. I am somewhat new to > configuring filter rules. I have done straight port forwarding, but based > on your description, it appears I need to redirect one port to another (i.e. > filter rule?). > > I am using a Netgear RP114. > > The corrective action I have taken based on your message was to open a > second port in my firewall and forward that port to the machine running the > 'gdipc -g' command. On my Netgear router, it appears as such: > > Menu 15 - SUA Server Setup > Rule Start Port No. End Port No. IP Address > --------------------------------------------------- > 1. Default Default 0.0.0.0 > 2. 3645 3646 10.10.22.2 > > Note: I have tried both defining a range ( 3645 -> 3646 ) and individual ( > 3645 -> 3645 && 3646 -> 3646 ) forwarding definitions. > > I have also tried defining the filter rule: > Menu 21.4 - Filter Rules Summary > # A Type Filter Rules M m n > - - ---- ---------------------------------------------- - - - > 1 Y IP Pr=17, SA=10.10.22.2, SP=3645, DA=0.0.0.0 N N N > 2 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=3646 N F N > > And in /winnt/system32/drivers/etc/services: > > gnudynipsend 3645/udp > gnudyniprecv 3646/udp > > The output still appears as such: > > F:\Software\gdipc>gdipc -g 3645:3646 > ==== gdipc.bat running: Sat Mar 23 06:53:15 2002 ==== > Configuration file name: F:/Software/gdipc/gdipc.conf.txt > Cache file name: F:/Software/gdipc/gdipc.cache.user.zeropain.com.txt > Address validation failed for 24.136.122.212 - UDP packet timed out > Attempting update at zeropain.com ... > Update to address 24.136.122.212 from 24.136.122.212 successful for > user.zeropain.com > > ============================================================== > > Apparantly, no matter how I define my port filtering/forward, I am getting > the same response back (updating the address of the GnuDIP server correctly, > but not being able to determine it hasn't changed). > > I have trolled some newsgroups for postings on this, but I haven't found an > example that I understand will do what I need to do to use gdipc. > > Thanks for your help! > > -brian > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > -- > GnuDIP Mailing List > http://gnudip2.sourceforge.net/#mailinglist -- Creighton MacDonnell http://macdonnell.ca/ -- GnuDIP Mailing List http://gnudip2.sourceforge.net/#mailinglist