Re: OpenPGP card stopped working

Klaus Layer wrote on 29.01.2012: > Hi, > > after several years without any issue my openpgp card stopped working today on > my Ubuntu Lucid system. gpg --card-status just returns: > > gpg --card-status > gpg: selecting openpgp failed: ec=6.108 > gpg: OpenPGP card not

OpenPGP card stopped working

Hi, after several years without any issue my openpgp card stopped working today on my Ubuntu Lucid system. gpg --card-status just returns: gpg --card-status gpg: selecting openpgp failed: ec=6.108 gpg: OpenPGP card not available: general error I am using an omnikey cardman 4040 reader. This

Re: OpenPGP card stopped working

Michel Messerschmidt <[EMAIL PROTECTED]> writes: > On Wed, Apr 23, 2008 at 07:36:47PM -0400, Micah Anderson wrote: >> >From what I can tell, none of those packages should have any affect on >> the card itself, but I am no expert in this matter. >> >> Although it sounds like you just had to reboot

Re: OpenPGP card stopped working

On Wed, Apr 23, 2008 at 07:36:47PM -0400, Micah Anderson wrote: > >From what I can tell, none of those packages should have any affect on > the card itself, but I am no expert in this matter. > > Although it sounds like you just had to reboot, and things worked > fine. I'm still unable to access m

Re: OpenPGP card stopped working

Henry Bremridge <[EMAIL PROTECTED]> writes: > On Wed, Apr 23, 2008 at 10:57:54AM -0400, Micah Anderson wrote: >> I too am using Debian (sid), and wonder if this is related to some >> library update. I tried downgrading my libpcsclite1 to the previous >> version, but that didn't change anything.

Re: OpenPGP card stopped working

On Wed, Apr 23, 2008 at 10:57:54AM -0400, Micah Anderson wrote: > Henry Bremridge <[EMAIL PROTECTED]> writes: > > > On Tue, Apr 22, 2008 at 10:07:41PM -0400, Micah Anderson wrote: > >> $ gpg --card-status > >> gpg: apdu_send_simple(0) failed: no card > >> Please insert the card and hit return or e

Re: OpenPGP card stopped working

Henry Bremridge <[EMAIL PROTECTED]> writes: > On Tue, Apr 22, 2008 at 10:07:41PM -0400, Micah Anderson wrote: >> $ gpg --card-status >> gpg: apdu_send_simple(0) failed: no card >> Please insert the card and hit return or enter 'c' to cancel: >> gpg: pcsc_establish_context failed: no service (0x80

Re: OpenPGP card stopped working

On Wed, Apr 23, 2008 at 12:54:32PM +0100, Henry Bremridge wrote: > I have a SCR-335 (on Debian Lenny) and this failed this morning > > $ gpg --card-status > gpg: pcsc_establish_context failed: no service (0x8010001d) > gpg: card reader not available > gpg: OpenPGP card not available: general error

Re: OpenPGP card stopped working

On Tue, Apr 22, 2008 at 10:07:41PM -0400, Micah Anderson wrote: > > I have an OmniKey CardMan 4040 and it was working fine for the last two > months that I've had the OpenPGP card. Suddenly, it seems to think there > is no card present. I never needed pcscd running as I could just use the > intern

OpenPGP card stopped working

I have an OmniKey CardMan 4040 and it was working fine for the last two months that I've had the OpenPGP card. Suddenly, it seems to think there is no card present. I never needed pcscd running as I could just use the internal driver (I just needed libpcsclite1 installed). Did my card die already?

Re: OpenPGP card stopped working

Hi! Am Donnerstag, den 27.03.2008, 08:34 -0700 schrieb Harvey Muller: > If you decide not to remove seahorse-agent, for any reason, > you can workaround the issue by using the --no-use-agent option with gpg. Thanks, putting "no-use-agent" into gpg.conf did the trick. Now I have the nice things o

Re: OpenPGP card stopped working

To: Andreas Grassl <[EMAIL PROTECTED]> > Cc: gnupg-users@gnupg.org > Sent: Wednesday, March 26, 2008 5:53:09 PM > Subject: Re: OpenPGP card stopped working > > Hi, > > Andreas Grassl wrote: > > Sven Radde schrieb: > >> Am Sonntag, den 09.03.2008, 15:05 +

Re: OpenPGP card stopped working

Hi, Andreas Grassl wrote: > Sven Radde schrieb: >> Am Sonntag, den 09.03.2008, 15:05 +0100 schrieb Sven Radde: >>> Apart from applying the regular patches, the only action I remember that >>> could possibly have an impact on GnuPG was installing the "seahorse" >>> package. However, removing it aga

Re: OpenPGP card stopped working

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Sven Radde schrieb: > Am Sonntag, den 09.03.2008, 15:05 +0100 schrieb Sven Radde: >> Apart from applying the regular patches, the only action I remember that >> could possibly have an impact on GnuPG was installing the "seahorse" >> package. However, r

OpenPGP card stopped working

Sven, I think I just bumped into your problem. I've been testing Hardy, and haven't had any problems with the OpenPGP card until now. I have to investigate further, but preliminary results indicate a udev or related problem. In Gutsy, the device is created in /dev, in Hardy it is not. Hardy

Re: OpenPGP card stopped working

On Mon, 10 Mar 2008 18:15, [EMAIL PROTECTED] said: > I've the same problem with an SCM 535. By running the pcscd in You probably meant the SCR 355. > ccid_usb.c:704:ccid_check_firmware() Firmware (4.15) is bogus! but you > choosed to use it This problem is well known. When using GnuPG with it

Re: OpenPGP card stopped working

Hi! Am Sonntag, den 09.03.2008, 15:05 +0100 schrieb Sven Radde: > Apart from applying the regular patches, the only action I remember that > could possibly have an impact on GnuPG was installing the "seahorse" > package. However, removing it again did not change anything. Update: It works again.

Re: OpenPGP card stopped working

On Mon, 2008-03-10 at 18:15 +0100, Werner Dittmann wrote: > I've the same problem with an SCM 535. By running the pcscd in > forgroung with debug enabled I got the follwoing messages: > have you tried posting directly the muscle's mailing list ? http://lists.drizzle.com/pipermail/muscle/ Ludovi

Re: OpenPGP card stopped working

I've the same problem with an SCM 535. By running the pcscd in forgroung with debug enabled I got the follwoing messages: pcscdaemon.c:294:main() pcscd set to foreground with debug send to stderr pcscdaemon.c:507:main() pcsc-lite 1.4.3 daemon ready. hotplug_libusb.c:454:HPAddHotPluggable() Adding

Re: OpenPGP card stopped working

Hi! Albert Dengg schrieb: i don't know if it is changed..but last time i looked it did set the permission through a shell script Yes. It is a script that runs chgrp and chmod on 'something'. i rewrote the rules file to do it directly and it know works flawlessly on instant on all machines i

Re: OpenPGP card stopped working

Hi! Werner Dittmann schrieb: I've the same problem with an SCM 535. By running the pcscd in forgroung with debug enabled I got the follwoing messages: As far as I can tell from its output, pcscd is running normally. Inserting and removing the OpenPGP card prints the appropriate messages. I don

Re: OpenPGP card stopped working

On Mon, Mar 10, 2008 at 09:22:35AM +0100, Sven Radde wrote: > Hi! > > Michael Kesper schrieb: >> pcscd sometimes gives trouble, for example when you try to create keys on the >> card. > No problem with that, I created my keys off-card and then moved them. > I thought this would be the easiest way t

Re: OpenPGP card stopped working

Hi! Michael Kesper schrieb: pcscd sometimes gives trouble, for example when you try to create keys on the card. No problem with that, I created my keys off-card and then moved them. I thought this would be the easiest way to have a backup key ready if the card breaks. For best effect try thi

Re: OpenPGP card stopped working

Hi, * Sven Radde <[EMAIL PROTECTED]> [2008-03-09 19:40:32 +0100]: > Same thing here, only that I have an SCM Microsystems SCR335 reader. > Actually, I was somewhat surprised that I had to install PC/SC at all, since > says that

Re: OpenPGP card stopped working

> Any ideas? Or, for starters, any hints to produce a more meaningful > error message? Sven, I've used the OpenPGP card recently with Gutsy and the Hardy releases without issue. To troubleshoot you can try: $ ps aux | grep pcscd The above commands should report two lines, one for the grep comm

Re: OpenPGP card stopped working

Hi! Thanks for your ideas, Harvey. Am Sonntag, den 09.03.2008, 10:56 -0700 schrieb Harvey Muller: > If pcscd is running, Yes, it is. > then my guess is that there is something wrong with the smartcard driver. > (...) > I'm using a GemPC Twin usb card reader. To get it to work, I only have to

OpenPGP card stopped working

Hello! I was quite happy with my OpenPGP smartcard under Ubuntu until to the point where it simply stopped working. This is what I currently get: $ gpg -v --card-status gpg: selecting openpgp failed: unknown command gpg: OpenPGP Karte ist nicht vorhanden: Allgemeiner Fehler Apart from applying t