you ask about this
William? I have currently no time and I am probably not able to solve this.
Regards,
Anna
On Jun 6, 2013, at 2:39 AM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi, Michael,
On Wed, Jun 5, 2013 at 11:45 PM, Michael Barton
michael.bar...@asu.edu wrote
have currently no time and I am probably not able to solve this.
Regards,
Anna
On Jun 6, 2013, at 2:39 AM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi, Michael,
On Wed, Jun 5, 2013 at 11:45 PM, Michael Barton
michael.bar...@asu.edu wrote:
OK. I did this remotely
Hi,
On Fri, Jun 28, 2013 at 2:29 AM, Helena Mitasova hmit...@ncsu.edu wrote:
regarding the r.mapcalc issue in command console on wingrass -
(sorry I did not make it clear it was for wingrass - it always worked well
on Mac and linux)
It is not critical, windows users can still use the
On Thu, Jul 4, 2013 at 2:23 PM, Blumentrath, Stefan
stefan.blumentr...@nina.no wrote:
Hi
I just downloaded the newest GRASS (7) version from svn in order to test
the issue.
In the build process I get an error message:
Errors in:
/data/src/grass70svn/man
make in the man directory says:
On Tue, Jul 2, 2013 at 8:57 PM, Anna Petrášová kratocha...@gmail.comwrote:
Hi,
On Fri, Jun 28, 2013 at 2:29 AM, Helena Mitasova hmit...@ncsu.edu wrote:
regarding the r.mapcalc issue in command console on wingrass -
(sorry I did not make it clear it was for wingrass - it always worked
well
Hi,
On Sun, Jul 7, 2013 at 2:42 PM, Yann Chemin yche...@gmail.com wrote:
Hi
mapswipe is having a small issue,
when i start it from a zoomed area with a single map layer selected,
then I selected a second map layer, the second map layer does not have
the zzomed extents of the first one...
On Tue, Jul 9, 2013 at 2:29 PM, Maris Nartiss maris@gmail.com wrote:
Sorry, Markus, to interrupt you.
Don't release without backporting r51052 as 6.4.3 g.gui fails to start
with wxpython 2.9.1
http://trac.osgeo.org/grass/changeset/51052
This is not the only change which has to be done
On Tue, Jul 9, 2013 at 3:12 PM, Martin Landa landa.mar...@gmail.com wrote:
Hi,
2013/7/9 Maris Nartiss maris@gmail.com:
Current situation that wxgui fails with cryptic error is also not a
solution. If you consider compatibility with 2.9 to not easy solvable,
is it possible to enforce
Hi,
On Wed, Jul 17, 2013 at 12:37 PM, Nikos Alexandris
n...@nikosalexandris.netwrote:
Dear Anna,
would a tri-view Map Swipe be feasible? Thinking of comparing pre-, post-
and
changes maps for example.
Sorry, not so feasible. I was also thinking about this but it is not much
supported by
Hi,
I get this error when launching d.rast3d from layer manager toolbar on
Windows.
I fixed it in r57218 [1] but it I was wondering if there is some better
solution?
Thanks, Anna
Traceback (most recent call last):
File C:\OSGeo4W_dev\apps\grass\grass-7.0.svn\etc\gui\wxpy
thon\lmgr\frame.py,
Hi,
On Thu, Jul 18, 2013 at 11:30 PM, Hamish hamis...@yahoo.com wrote:
Anna wrote:
I get this error when launching d.rast3d from layer manager
toolbar on Windows.
I fixed it in r57218 [1] but it I was wondering if there is
some better solution?
...
Traceback (most recent call last):
Hi Pietro,
On Wed, Aug 7, 2013 at 1:39 PM, Pietro peter.z...@gmail.com wrote:
Hi all!
I'm trying to write a grass7 add-ons, but I'm fighting with one
parameter that wont work... and I'm not able to understand where the
problem is...
the python code is:
{{{
ERROR: Sorry Kchk=K_chk is
Hi,
On Mon, Sep 2, 2013 at 3:20 PM, Michael Barton michael.bar...@asu.eduwrote:
I received a report that the wrapper for v.in.ogr is throwing an error
when importing files of multiple types (kml and shp tested). The error in
the terminal is:
pythonw2.6(5979,0xad1e72c0) malloc: *** error
Hi,
On Mon, Sep 9, 2013 at 3:14 AM, Yann Chemin yche...@gmail.com wrote:
so the pattern returns to the CLI not to the output list list
list=g.mlist(type='rast',pattern='interpolation_*') = not working
Any way to do it?
there is a function in python scripting library [1] and with pygrass
On Thu, Sep 19, 2013 at 4:43 AM, Martin Landa landa.mar...@gmail.comwrote:
Hi,
2013/9/19 svn_gr...@osgeo.org:
Author: hamish
Date: 2013-09-19 00:09:44 -0700 (Thu, 19 Sep 2013)
New Revision: 57748
[...]
Log:
crop off romans '5km', fix png canvas placement. also removes alpha
layer
On Wed, Oct 2, 2013 at 12:32 PM, Pietro peter.z...@gmail.com wrote:
Hi Vaclav,
On Wed, Oct 2, 2013 at 3:47 PM, Vaclav Petras wenzesl...@gmail.com
wrote:
I'm always for pure, correct and clean solutions. However, I'm not expert
neither in MS Windows registry nor in Python virtual
Hi,
please test r57969. You should see a diff if the proj_info files don't
match.
Anna
On Wed, Oct 9, 2013 at 6:08 PM, Markus Neteler nete...@osgeo.org wrote:
Hi,
the error (example UTM map import into LAEA location):
r.unpack landcover_1m.pack
ERROR: Projection information does not
Hi,
On Tue, Oct 22, 2013 at 1:51 AM, Michael Barton michael.bar...@asu.eduwrote:
Here is a bit more. When I try to send an extension to a directory where
I do have permissions without using sudo, g.extension on GRASS 7 still
insists on putting it into the GRASS app.
GRASS 7.0.svn
Hi devs,
I tried to run GRASS 7 configure on new Mac 10.9 but it fails when trying
to find GDAL:
configure: error: *** Unable to locate GDAL library.
I tried to reinstall GDAL from Williams' binaries but it didn't help. Any
ideas what to check? I am using Mac OS just occasionally so I am not so
(SHESC), 480-727-0709 (CSDC)
www: http://www.public.asu.edu/~cmbarton, http://csdc.asu.edu
On Nov 4, 2013, at 9:19 AM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi devs,
I tried to run GRASS 7 configure on new Mac 10.9 but it fails when trying
to find GDAL:
configure: error
Hi,
On Mon, Nov 4, 2013 at 2:16 PM, Anna Petrášová kratocha...@gmail.comwrote:
Hi,
On Mon, Nov 4, 2013 at 1:36 PM, Rebecca Bennett rabenn...@ymail.comwrote:
Dear GRASS users,
I have recently been made aware of the positive and negative openness
vizualisations (Yokoyama et al 2002
http
Hi Nikos.
On Wed, Dec 4, 2013 at 2:11 AM, Nikos Alexandris
n...@nikosalexandris.netwrote:
Vaclav and Anna,
thank yo so muuch for the advancments in g.gui.mapswipes. Really, very
useful.
I am glad you find it useful.
There is one issue in mirror mode: the cross pointer (othen than the
On Wed, Dec 4, 2013 at 9:07 AM, Nikos Alexandris
n...@nikosalexandris.netwrote:
Anna Petrášová wrote:
-- cut ---
-self.lineid = self.DrawCross(pdc = self.pdcTmp, coords = coords,
size = 10, pen = wx.BLACK_PEN)
-- cut ---
Anna, is it possible to draw a circle? Is this DrawCross
:43 PM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi all,
I am still having problems to compile GRASS on Maverick, it cannot
find GDAL, I already reinstalled the frameworks and Xcode, too. I tried to
compile the simple code which seems to be compiled during configure:
#include
PM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi all,
I am still having problems to compile GRASS on Maverick, it cannot
find GDAL, I already reinstalled the frameworks and Xcode, too. I tried to
compile the simple code which seems to be compiled during configure:
#include gdal.h
On Wed, Dec 4, 2013 at 10:47 PM, Michael Barton michael.bar...@asu.eduwrote:
On Dec 4, 2013, at 7:16 PM, Anna Petrášová kratocha...@gmail.com wrote:
On Wed, Dec 4, 2013 at 6:39 PM, Michael Barton michael.bar...@asu.eduwrote:
Some updates.
I changed my terminal environment
Hi,
I almost forgot about a patch for nviz which is now in GRASS 7 since August
[1]. It should be probably backported. I have been testing isosurfaces
quite a lot with different data and I have almost no crashes now. But I
test only on Linux. The reason for this patch is in this ticket [2].
So if
Hi,
I am not a Mac or modeler user, but I can test. I suggest you to create
tickets for each problem, ideally with detailed description of the steps
leading to the error. The version of wxPython and Mac OSX can be helpful,
too. And always check for the errors in console (or ask your students to
Hi Yann,
I don't think this problem relates to toolboxes. The error message is
completely different. I would first suggest to install new Python version
2.7.6 [1] because there have been some problems and Python had to release
new version. If this does not help, unfortunately I have no other
On Fri, Dec 13, 2013 at 2:52 AM, Markus Neteler nete...@osgeo.org wrote:
Hi Anna,
On Fri, Dec 13, 2013 at 1:19 AM, Anna Petrášová kratocha...@gmail.com
wrote:
Hi,
I almost forgot about a patch for nviz which is now in GRASS 7 since
August
[1]. It should be probably backported. I have
Hi Nikos,
On Wed, Dec 18, 2013 at 7:33 PM, Nikos Alexandris
n...@nikosalexandris.netwrote:
Dear all, apologies for silence (I have to answer to a couple of threads in
grass-dev) but I am overloaded. This is however a quick idea that crossed
my
mind a few seconds before as I am working with
Hi Nikos,
On Wed, Dec 4, 2013 at 2:11 AM, Nikos Alexandris
n...@nikosalexandris.netwrote:
Vaclav and Anna,
thank yo so muuch for the advancments in g.gui.mapswipes. Really, very
useful.
There is one issue in mirror mode: the cross pointer (othen than the one
set/used by the Operating
On Mon, Dec 30, 2013 at 9:03 AM, Nikos Alexandris
n...@nikosalexandris.netwrote:
On Thursday 26 of December 2013 21:39:13 Anna Petrášová wrote:
Try r58534. When in Map Swipe, go to settings in toolbar and you can
change
the cursor there. Enjoy :-)
Hmmm... I am not satisfied at all
Hi all,
I added support for area measurement in wxGUI (the same place as measuring
distance). You are welcome to test. However, I have a few
questions/problems:
I was wondering if module m.measure requires a series of coordinates with
or without repeating the first pair of coordinates. This is
Vincent,
On Sun, Jan 5, 2014 at 5:19 AM, Vincent Bain b...@toraval.fr wrote:
Hi Anna,
I just tested on r58611. Unfortunately it fails :
could you try m.measure separately? Launch it from gui command line or menu
so that you have the interactive adding coordinates from map display. Could
you
Hi Vincent,
On Sun, Jan 5, 2014 at 10:14 AM, Vincent Bain b...@toraval.fr wrote:
Le dimanche 05 janvier 2014 à 08:42 -0500, Anna Petrášová a écrit :
Vincent,
On Sun, Jan 5, 2014 at 5:19 AM, Vincent Bain b...@toraval.fr wrote:
Hi Anna,
I just tested on r58611
Hi Vincent,
just FYI, I fixed (and Markus) the problems with units, so you should now
be able to use 'metres' as well (but in GRASS 7 only).
On Sun, Jan 5, 2014 at 4:05 PM, Anna Petrášová kratocha...@gmail.comwrote:
Hi Vincent,
On Sun, Jan 5, 2014 at 10:14 AM, Vincent Bain b...@toraval.fr
On Tue, Jan 7, 2014 at 7:43 AM, Helmut Kudrnovsky hel...@web.de wrote:
(which I really actually need, i.landsat.dehaze)
have a look at
http://grasswiki.osgeo.org/wiki/AddOns/GRASS_6
and
http://grasswiki.osgeo.org/wiki/AddOns/GRASS_7/imagery
Hi,
On Sun, Jan 12, 2014 at 5:40 PM, Maciej Sieczka msiec...@sieczka.orgwrote:
Hello,
Can you please tell what is the status of wxPython 3 support in SVN GRASS6
and 7?
so far I tested grass 6 and 7 with wxpython 2.9 only. I am not sure what's
the difference between 2.9 and 3 but I hope
On Tue, Jan 28, 2014 at 2:57 PM, Markus Metz
markus.metz.gisw...@gmail.comwrote:
Trying a summary on this discussion.
AFAIU, the whole discussion boils down to the question if we want to
require a system-wide installation of Python with correct python file
associations in the registry,
Hi,
so I renamed it to bilinear/bicubic in r58903. I hope that I changed
everything needed.
Anna
On Thu, Jan 30, 2014 at 7:20 PM, Glynn Clements gl...@gclements.plus.comwrote:
Anna Petrášová wrote:
So, is there any objection to change it back to bilinear/bicubic?
It was originally
On Mon, Feb 10, 2014 at 2:28 PM, Markus Metz
markus.metz.gisw...@gmail.comwrote:
On Mon, Feb 10, 2014 at 7:53 PM, Vaclav Petras wenzesl...@gmail.com
wrote:
On Mon, Feb 10, 2014 at 1:19 PM, Markus Neteler nete...@osgeo.org
wrote:
Hi,
I noticed on Linux that while type
On Mon, Feb 10, 2014 at 3:25 PM, Anna Petrášová kratocha...@gmail.comwrote:
On Mon, Feb 10, 2014 at 2:28 PM, Markus Metz
markus.metz.gisw...@gmail.com wrote:
On Mon, Feb 10, 2014 at 7:53 PM, Vaclav Petras wenzesl...@gmail.com
wrote:
On Mon, Feb 10, 2014 at 1:19 PM, Markus Neteler
Hi,
On Mon, Feb 10, 2014 at 12:56 PM, Markus Neteler nete...@osgeo.org wrote:
Hi,
in wxGUI - Settings - Preferences - Layer tab
there is the Default color table text color list, could this be
switched to the nice graphical one as used/generated here:
case G_OPT_M_COLR:
On Mon, Feb 10, 2014 at 5:07 PM, Markus Neteler nete...@osgeo.org wrote:
On Mon, Feb 10, 2014 at 10:49 PM, Anna Petrášová kratocha...@gmail.com
wrote:
On Mon, Feb 10, 2014 at 3:25 PM, Anna Petrášová kratocha...@gmail.com
wrote:
On Mon, Feb 10, 2014 at 2:28 PM, Markus Metz
On Mon, Feb 10, 2014 at 5:52 AM, Pietro peter.z...@gmail.com wrote:
On Mon, Feb 10, 2014 at 10:43 AM, Martin Landa landa.mar...@gmail.com
wrote:
2014-02-10 11:39 GMT+01:00 Pietro peter.z...@gmail.com:
So are you agree to change the requirements for grass70 from Python =
2.4 to Python =
On Tue, Feb 11, 2014 at 2:40 PM, Blumentrath, Stefan
stefan.blumentr...@nina.no wrote:
Hei,
I just tried to run r.threshold in GRASS 7. Unfortunately I got an error
message, so I looked into the python code and found that the module uses
GRASS 6 syntax for r.stats (namely fs instead of
Hi,
I just added the support of exporting image from wxGUI and d.mon through
command line. It does not support the advanced options of d.out.file in
GRASS 64 (mainly because of different rendering mechanism). Testing
(especially in d.mon) is welcome.
Related to this, any ideas if wxGUI should
Hi,
On Mon, Feb 10, 2014 at 12:52 PM, Vaclav Petras wenzesl...@gmail.comwrote:
On Mon, Feb 10, 2014 at 12:33 PM, Markus Neteler nete...@osgeo.orgwrote:
Hi,
(surprisingly) the Search modules tab does not have any content from
the File menu, i.e it is lacking import/export etc.
Is there
On Mon, Feb 17, 2014 at 7:09 AM, Maris Nartiss maris@gmail.com wrote:
Hello all,
I would like to propose to merge all MS Windows platforms into one.
Rationale - most of MS Windows problems are specific to more than one
version. Issues concerning only single version are minority vs the
On Thu, Feb 20, 2014 at 4:06 PM, Markus Metz
markus.metz.gisw...@gmail.comwrote:
On Thu, Feb 20, 2014 at 9:08 AM, Tereza Fiedlerová
tfiedler...@gmail.com wrote:
Hello,
I'm thinking about participating in GSoC this year, if I find some
interesting topic. I went through GRASS GSoC ideas.
On Fri, Feb 28, 2014 at 5:14 PM, Luca Delucchi lucadel...@gmail.com wrote:
On 28 February 2014 15:38, Markus Neteler nete...@osgeo.org wrote:
Ideas? thanks
I think the attached patch should fix the problem (I have no time to
test it), but I don't know if it broke something else.
I saw
Hi,
On Wed, Mar 5, 2014 at 5:56 AM, Martin Landa landa.mar...@gmail.com wrote:
2014-03-05 11:53 GMT+01:00 Martin Landa landa.mar...@gmail.com:
when you start typing the name, it should change automatically
selection in drop-down widget.
I am wrong, it's not working like that. AFAIR it was
Hi Luca,
On Wed, Mar 5, 2014 at 8:55 AM, Luca Delucchi lucadel...@gmail.com wrote:
Hi everybody, specially wxgui devs
I committed a lot of improvements in g.gui.rlisetup with commit number
59197.
Several work will be do yet to compare g.gui.rlisetup with r.li.setup of
grass6.
Some of the
Hi all,
is anyone planning to go to Portland in September for FOSS4G? Any plans for
GRASS workshop? I am asking because the workshop proposal deadline is March
15. Vaclav and I are willing to do a workshop, probably on spatio-temporal
data handling and visualization in GRASS. It would be good to
On Tue, Mar 25, 2014 at 6:30 AM, Johannes Radinger
johannesradin...@gmail.com wrote:
Hi,
it wanted to try out the 3D capabilities of GRASS 7. However when I change
to the 3d view (WxNviz) nothing is rendered, instead I get the message that
I should try a different depth buffer number. This
/
/Johannes
On Wed, Mar 26, 2014 at 5:11 AM, Anna Petrášová kratocha...@gmail.comwrote:
On Tue, Mar 25, 2014 at 6:30 AM, Johannes Radinger
johannesradin...@gmail.com wrote:
Hi,
it wanted to try out the 3D capabilities of GRASS 7. However when I
change to the 3d view (WxNviz) nothing
Hi,
On Wed, Mar 26, 2014 at 1:44 PM, Maciej Sieczka msiec...@sieczka.orgwrote:
Hi,
Does the location wizard fails to launch for any of you in the same way it
does for me, in latest releasebranch_6_4?:
---
Cleaning up temporary files ...
Starting GRASS ...
Traceback (most recent call
Hi devs,
On Thu, Mar 27, 2014 at 4:13 PM, Markus Neteler nete...@osgeo.org wrote:
Greetings from the Vienna Code Sprint!
We have prepared a first beta release of GRASS GIS 7.0.0:
thanks for your hard work!
Source code package:
http://grass.osgeo.org/grass70/source/
-
at 5:40 PM, Anna Petrášová kratocha...@gmail.comwrote:
On Wed, Mar 26, 2014 at 5:27 AM, Johannes Radinger
johannesradin...@gmail.com wrote:
Hi,
I just reinstalled wxPython and recompiled GRASS to be sure that I am
working with the newest versions.
The problem still persists. Here how I
Hi,
I was wondering if anyone is using Load/Save expressions in r.mapcalc GUI.
I just added there the copy button which is standard for all modules. When
I need, I store multiple r.mapcalc commands in a text file and then I just
copy and paste. Loading and saving expressions using the buttons
On Wed, Apr 2, 2014 at 5:56 AM, Markus Neteler nete...@osgeo.org wrote:
Hi,
some recent change in trunk (didn't find which) broke the color list
generator in r.colors:
hmm, it works for me. But I remember, it happened to me some time ago but
then it started to work again. It looks like it
Hi,
there is now mess in URLs for downloading addon binaries for Windows. I
fixed the url for releasebranch 7 (just hardcoded) but for example grass7
beta is not able to download addons. It would be nice to have the directory
structure and version numbering synchronized so that the formatted url
Note, that on Windows and on Ubuntu with wxPython 3, the manual page in the
tab is loaded immediately. I believe we should keep the manual in the tab,
I think people are more likely to look at the manual there than pressing
Help button. Personally I try to avoid pressing Help button in any
Hi,
since more and more users are using temporal framework, we should consider
creating a sample dataset for temporal data. This could be used in the
manual pages of t.* modules. Some of them still don't have any example and
the existing examples are based on tests with generated data which is
One more thing, to test the dataset, look at the examples here:
http://courses.ncsu.edu/mea592/common/Assign_GISmdmodel/a_temporal.html
Anna
On Tue, Apr 29, 2014 at 5:07 PM, Anna Petrášová kratocha...@gmail.comwrote:
Hi,
since more and more users are using temporal framework, we should
Hi,
On Thu, May 1, 2014 at 1:18 PM, Martin Landa landa.mar...@gmail.com wrote:
Hi all,
one of my students (Tereza, cc'ed) started to work on simple version
of the data catalog implemented as a new tab in Layer Manager. This
tool will allow to manage maps in the current location (remove,
Hi,
ps.map doesn't support multiple map frames directly, only through eps
instruction:
http://grasswiki.osgeo.org/wiki/Psmap_multi_pane_example
Composer is just a graphical front-end to ps.map. It could run ps.map on
more map frames and display them via eps instruction (automate what the
user has
Hi Yann,
it's grayed out because it tests if it's a working grass command (for
example r.in.lidar is grayed when you don't compile grass with liblas). You
can try to apply this patch which tests if the command looks like grass
command (regular expression) and if it is not, it doesn't disable it
understand what do you mean with RunMenuCmd, is there still some
problem and what is it exactly?
Anna
Thank you
Yann
On 18/05/2014, Anna Petrášová kratocha...@gmail.com wrote:
Hi Yann,
it's grayed out because it tests if it's a working grass command (for
example r.in.lidar is grayed when you
Hi,
I committed a change to rendering which could help to run d.mon and wxGUI
together. The environment is changed only for the rendering process and not
for the entire wxGUI. There is a lot of other places which should be
changed like this but the rendering is the most important. Please test, I
Talking about wx monitors, d.rast.leg does not really place legend next to
a raster map because GRASS_FRAME is not used at all. So it basically draws
legend and then raster map over it, so you can just change the order and
that should fix it but you will still have overlapping raster and legend.
Hi,
my first report:
1. What did you get done this week?
I was discussing the implementation with mentors and studying existing
implementation. More can be found on the projects's wiki [1]. The code will
be first in sandbox [2] and then moved to GRASS addons.
2. What do you plan on doing next
Hi,
another option (you might have considered it already) is to allow option
mapset to have multiple inputs. So 2 steps would be needed, first get all
mapsets with g.mapsets -l and then g.mlist with these mapsets. I suppose
you need it for the wxDataCatalog?
Anna
On Sun, May 25, 2014 at 7:45
On Sun, May 25, 2014 at 5:23 PM, Markus Neteler nete...@osgeo.org wrote:
Hi,
as Martin stated in a recent ticket comment, beta3 should be released asap.
I would like to get first the pygrass changes backported (not
difficult including the manual improvements).
A few more things are
On Tue, May 27, 2014 at 7:16 PM, Markus Neteler nete...@osgeo.org wrote:
Hi,
I tried to use the nice vector network tool in GRASS 7 relbranch but
(not always) when digitizing a point it refuses to do so with this
error:
Should be fixed in r60592,3 but please try it.
Anna
Traceback
Hi all,
1. What did you get done this week:
I started the implementation of r3.flow in Python. More information on the
wiki [1]. The code is here [2].
2. What do you plan on doing next week?
Continue implementation and testing on some simple artificial data. I will
test different integration
Hi,
nice work! I was just trying it and I found a small error, see below
On Thu, Jun 5, 2014 at 1:32 PM, svn_gr...@osgeo.org wrote:
Author: hcho
Date: 2014-06-05 10:32:48 -0700 (Thu, 05 Jun 2014)
New Revision: 60713
Modified:
grass/trunk/include/gis.h
grass/trunk/lib/gis/parser.c
Hi all,
1. What did you get done this week:
I have a prototype generating flowlines, I tested it so far on artificial
data. More on the wiki [1]. The code is here [2].
2. What do you plan on doing next week?
I would like to test it on different data and implement 3D flow
accumulation.
3. Are
On Mon, Jun 9, 2014 at 6:26 PM, Mojca Miklavec mo...@macports.org wrote:
Hi,
I'm sorry, but I forgot my password.
I wanted to reply to this ticket:
http://trac.osgeo.org/grass/ticket/2167
but I'm sending you an email as figuring out how to recover the
password will take a while and
Hi all,
1. What did you get done this week:
I have been working on computing flow accumulation. I have a simple version
working and a more precise way is almost ready. I also tried to support
different combination of inputs and outputs to make the module convenient
to use. More on the wiki [1].
Hi all,
1. What did you get done this week:
I was traveling, so unfortunately not much. I improved the flow
accumulation computation by integrating voxel traversal algorithm which I
thoroughly tested. The explanation is here [1] and code [2].
Then, with mentors we updated the plans for next few
On Tue, Jun 24, 2014 at 5:03 AM, Moritz Lennert
mlenn...@club.worldonline.be wrote:
Sorry for the somewhat aggressive subject line, but it's meant as a
heads-up and last call for action.
We want to release 6.4.4 and if no one has immediate solutions for these
bugs, I suggest to just declare
On Tue, Jun 24, 2014 at 5:56 PM, Martin Landa landa.mar...@gmail.com
wrote:
Dear Anna,
2014-06-24 19:59 GMT+02:00 Anna Petrášová kratocha...@gmail.com:
- https://trac.osgeo.org/grass/ticket/560 (WinGRASS not deleting temp
ppm
files from map display)
I just committed a fix
On Tue, Jun 24, 2014 at 5:52 PM, Martin Landa landa.mar...@gmail.com
wrote:
2014-06-24 23:51 GMT+02:00 Martin Landa landa.mar...@gmail.com:
also for me! I think it's better to have in OSGeo Live GRASS 6.4.4
rather that 6.4.3.
in other votes let us know if you have any objections. If not,
Hi,
On Wed, Jun 25, 2014 at 11:24 AM, Martina M duda1...@hotmail.es wrote:
Hello,
I want to create a C++ program to access the vector data in Grass. I use
Vect_open_old to open the table and Vect_read_line to access the
geometrical data. However, I don't know how to access to the column
On Fri, Jun 27, 2014 at 3:03 AM, Luca Delucchi lucadel...@gmail.com wrote:
On 26 June 2014 19:59, Markus Neteler nete...@osgeo.org wrote:
nice work, Luca (and thanks to Anna for code cleanup).
Sorry Anna, but I don't understand because you remove all the 3D code,
I would like to
On Fri, Jun 27, 2014 at 10:35 AM, Luca Delucchi lucadel...@gmail.com
wrote:
On 27 June 2014 15:46, Anna Petrášová kratocha...@gmail.com wrote:
On Fri, Jun 27, 2014 at 3:03 AM, Luca Delucchi lucadel...@gmail.com
wrote:
On 26 June 2014 19:59, Markus Neteler nete...@osgeo.org wrote
Hi all,
1. What did you get done this week:
I implemented Runge-Kutta with adaptive step size. I started to work on
on-the-fly gradient computation but it still needs to be improved.
2. What do you plan on doing next week?
I need to fix the gradient computation and see if it could be optimized.
Hi,
even after distclean g.mlist compilation fails:
gcc -g -Wall -Werror-implicit-function-declaration -fno-common -Wextra
-Wunused -I/usr/local/src/trunk/dist.i686-pc-linux-gnu/include
-I/usr/local/src/trunk/dist.i686-pc-linux-gnu/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64
Hm, it still doesn't compile. Anyone else has the same problem?
On Sat, Jun 28, 2014 at 5:21 PM, Huidae Cho gras...@gmail.com wrote:
I'm not sure why I didn't have a compilation problem on my machine.
Different installations have different dependencies?
On Sat, Jun 28, 2014 at 3:43 PM,
built
r61035
It works for me, no more missed ogr headers.
Thanks.
Massimo.
On Jun 28, 2014, at 5:55 PM, Huidae Cho gras...@gmail.com wrote:
Can you try r61035?
On Sat, Jun 28, 2014 at 5:41 PM, Anna Petrášová kratocha...@gmail.com
wrote:
Hm, it still doesn't compile. Anyone else
On Tue, Jul 1, 2014 at 10:17 AM, Luca Delucchi lucadel...@gmail.com wrote:
Hi devs,
The GRASS71 command console on Windows it is saving the history in
only one big multiline text.
If I remove to much information it jump to the previous command and
start to remove text also from that. This
On Wed, Jul 2, 2014 at 11:19 AM, Anna Petrášová kratocha...@gmail.com
wrote:
On Wed, Jul 2, 2014 at 10:59 AM, Vaclav Petras wenzesl...@gmail.com
wrote:
On Wed, Jul 2, 2014 at 10:39 AM, Martin Landa landa.mar...@gmail.com
wrote:
The reason is empty XML wxGUI menu file (menudata.xml
Hi,
I will be traveling tomorrow, so I am sending this a bit earlier.
1. What did you get done this week:
I fixed gradient computation from last week and did some profiling. I
started with rewriting the module to C to see how familiar I am with C.
2. What do you plan on doing next week?
I will
On Sun, Jul 6, 2014 at 3:59 AM, Helmut Kudrnovsky hel...@web.de wrote:
Martin Landa wrote
Hi,
2014-07-02 20:54 GMT+02:00 Martin Landa lt;
landa.martin@
gt;:
It's because it can't find v.in.gps. I suggest to add to the patch
something like this:
thanks, I included modified
On Tue, Jul 8, 2014 at 4:13 AM, Helmut Kudrnovsky hel...@web.de wrote:
Anna Petrášová wrote
On Sun, Jul 6, 2014 at 3:59 AM, Helmut Kudrnovsky lt;
hellik@
gt; wrote:
C:\OSGeo4W\apps\grass\grass-7.1.svn\etc\python\grass\script\core.py,
li
ne 58, in __init__
raise OSError
On Wed, Jul 9, 2014 at 8:04 AM, Helmut Kudrnovsky hel...@web.de wrote:
hi,
tested with
System Info
GRASS Version: 7.0.0svn
GRASS SVN Revision: 61140
Erstellungsdatum: 2014-07-08
Build Platform: i686-pc-mingw32
GDAL/OGR: 1.11.0
PROJ.4: 4.8.0
GEOS: 3.4.2
SQLite: 3.7.17
Python: 2.7.4
Hi,
On Fri, Jul 11, 2014 at 10:51 AM, Paulo van Breugel p.vanbreu...@gmail.com
wrote:
Hi, is there a way to reshuffle raster data in GRASS?
If I understand correctly what reshuffle means, I would use GRASS Python
Scripting library [1] (or PyGRASS perhaps) to load the maps into numpy and
just
Hi,
1. What did you get done this week:
I have now a working C implementation of the r3.flow module with
functionality limited to generating flow lines [2].
2. What do you plan on doing next week?
I will continue with the C implementation (flow accumulation, gradient
computation)
3. Are you
1 - 100 of 739 matches
Mail list logo