[Group.of.nepali.translators] [Bug 1614215] Re: "md5sums differ" message seems to indicate an install problem

2016-08-26 Thread Tyler Hicks 
** Also affects: apparmor (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Also affects: apparmor (Ubuntu Yakkety)
   Importance: Low
 Assignee: Tyler Hicks (tyhicks)
   Status: In Progress

** Changed in: apparmor (Ubuntu Xenial)
   Importance: Undecided => Low

** Changed in: apparmor (Ubuntu Xenial)
   Status: New => In Progress

** Changed in: apparmor (Ubuntu Xenial)
 Assignee: (unassigned) => Tyler Hicks (tyhicks)

** Description changed:

+ [Impact]
+ Confusing output from a diff command executed during the apparmor update 
process leaves users concerned about the state of their system.
+ 
+ [Test Case]
+ 1. Make sure that apparmor 2.10.95-0ubuntu2 from the -release pocket is 
installed
+ 
+ 2. Update to the apparmor package in -proposed
+ 
+ 3. Look at the output during the update process to verify that the
+ following message is *not* printed:
+ 
+   Files /var/lib/dpkg/info/apparmor.md5sums and
+ /var/lib/apparmor/profiles/.apparmor.md5sums differ
+ 
+ [Regression Potential]
+ Considered to be extremely low. The change is a one-liner that pipes the 
stdout of diff command to /dev/null (the -q option of diff is not sufficient).
+ 
+ [Original description]
+ 
  Upon applying the latest Ubuntu routine-update, I observed these
  messages:
  
  Setting up apparmor (2.10.95-0ubuntu2.2) ...
  Installing new version of config file 
/etc/apparmor.d/abstractions/dbus-session-strict ...
  update-rc.d: warning: start and stop actions are no longer supported; falling 
back to defaults
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.apache2
  Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
  Files /var/lib/dpkg/info/apparmor.md5sums and 
/var/lib/apparmor/profiles/.apparmor.md5sums differ
  
  "The reason why I am filing a bug report" is the LAST line.  I presume
  that if md5sums do not agree, something was probably done improperly in
  preparing this particular software-update blast.
  
  However, in-passing, I would also point out line #3, about "start and
  stop actions no longer supported." That seems to me to be something (of
  much less importance, obviously) that might have been overlooked.  (I've
  seen =that= message for some time now.)
  
  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: apparmor 2.10.95-0ubuntu2.2
  ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
  Uname: Linux 4.4.0-34-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Wed Aug 17 14:22:55 2016
  InstallationDate: Installed on 2016-03-02 (168 days ago)
  InstallationMedia: Ubuntu-Server 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  ProcEnviron:
-  TERM=xterm-256color
-  PATH=(custom, no user)
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
+  TERM=xterm-256color
+  PATH=(custom, no user)
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
  ProcKernelCmdline: BOOT_IMAGE=/vmlinuz-4.4.0-34-generic 
root=/dev/mapper/hostname--vg-root ro
  SourcePackage: apparmor
  Syslog:
-  Aug 10 10:36:07 IntersignVM dbus[1638]: [system] AppArmor D-Bus mediation is 
enabled
-  Aug 11 13:10:08 IntersignVM dbus[1655]: [system] AppArmor D-Bus mediation is 
enabled
-  Aug 16 08:40:24 IntersignVM dbus[1693]: [system] AppArmor D-Bus mediation is 
enabled
-  Aug 17 13:58:37 IntersignVM dbus[1657]: [system] AppArmor D-Bus mediation is 
enabled
+  Aug 10 10:36:07 IntersignVM dbus[1638]: [system] AppArmor D-Bus mediation is 
enabled
+  Aug 11 13:10:08 IntersignVM dbus[1655]: [system] AppArmor D-Bus mediation is 
enabled
+  Aug 16 08:40:24 IntersignVM dbus[1693]: [system] AppArmor D-Bus mediation is 
enabled
+  Aug 17 13:58:37 IntersignVM dbus[1657]: [system] AppArmor D-Bus mediation is 
enabled
  UpgradeStatus: Upgraded to xenial on 2016-05-11 (98 days ago)

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1614215

Title:
  "md5sums differ" message seems to indicate an install problem

Status in AppArmor:
  Invalid
Status in Ubuntu GNOME:
  Invalid
Status in apparmor package in Ubuntu:
  In Progress
Status in apparmor source package in Xenial:
  In Progress
Status in apparmor source package in Yakkety:
  In Progress

Bug description:
  [Impact]
  Confusing output from a diff command executed during the apparmor update 
process leaves users concerned about the state of their system.

  [Test Case]
  1. Make sure that apparmor 2.10.95-0ubuntu2 from the -release pocket is 
installed

  2. Update to the apparmor package in -proposed

  3. Look at the output during the update process to verify that the
  following message is *not* printed:

Files /var/lib/dpkg/info/apparmor.md5sums and
  /var/lib/apparmor/profiles/.apparmor.md5sums differ

  [Regression Potential]
  Considered to be extremely low. The change is a one-liner that pipes the 
stdout of diff command to /dev/null (the -q option of diff is not sufficient).

[Group.of.nepali.translators] [Bug 1616813] Re: Please add support for alps touchpad.

2016-08-26 Thread Tim Gardner 
Merged in v4.8

** Also affects: linux (Ubuntu Yakkety)
   Importance: Undecided
   Status: Incomplete

** Also affects: linux (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Yakkety)
   Status: Incomplete => Fix Released

** Changed in: linux (Ubuntu Xenial)
   Status: New => Fix Committed

** Changed in: linux (Ubuntu Xenial)
 Assignee: (unassigned) => Ying-Chun Liu (paulliu)

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1616813

Title:
  Please add support for alps touchpad.

Status in HWE Next:
  New
Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Yakkety:
  Fix Released

Bug description:
  Hi,

  We need to support alps touchpad. Please considering SRU.
  The following ko needs to be used:
  1. hid-generic.ko
  3. hid-alps.ko

  This driver is backported from mainline v4.8-rc3 to linux 4.4 in
  xenial.

  Yours,
  Paul

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1616813/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1612089] Re: Fix for CVE-2016-5403 causes crash on migration if memory stats are enabled

2016-08-26 Thread Corey Bryant 
** No longer affects: cloud-archive/newton

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1612089

Title:
  Fix for CVE-2016-5403 causes crash on migration if memory stats are
  enabled

Status in Ubuntu Cloud Archive:
  New
Status in Ubuntu Cloud Archive icehouse series:
  Fix Committed
Status in Ubuntu Cloud Archive kilo series:
  Fix Committed
Status in Ubuntu Cloud Archive liberty series:
  Fix Committed
Status in Ubuntu Cloud Archive mitaka series:
  New
Status in qemu package in Ubuntu:
  Fix Released
Status in qemu-kvm source package in Precise:
  Fix Released
Status in qemu source package in Trusty:
  Fix Released
Status in qemu source package in Xenial:
  Fix Released
Status in qemu source package in Yakkety:
  Fix Released

Bug description:
  If memory statistics are enabled for the memory baloon device in
  libvirt like this:

  
 
 
  

  Then qemu exits with "qemu-system-x86_64: Virtqueue size exceeded"
  after the VM is migrated or when starting the VM again after a
  managedsave.

  This bug is present since 2.0.0+dfsg-2ubuntu1.26 and was not present
  in 2.0.0+dfsg-2ubuntu1.24. It's most probably caused by the Fix for
  CVE-2016-5403.

  Steps to reproduce:
  1. Create a VM with libvirt which contains the above memory balloon device
  2. Start the VM and let the Linux kernel boot (bug does not appear if the 
kernel is not yet booted,  eg. while in the PXE boot phase)
  3. Issue a managedsave
  4. Start the VM again
  5. The VM is restored and "crashes" right after it starts running again.
  6. You can find the qemu output "qemu-system-x86_64: Virtqueue size exceeded" 
in the log at /var/log/libvirt/vmname.log

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: qemu-system-x86 2.0.0+dfsg-2ubuntu1.26
  ProcVersionSignature: Ubuntu 3.13.0-93.140-generic 3.13.11-ckt39
  Uname: Linux 3.13.0-93-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.21
  Architecture: amd64
  Date: Thu Aug 11 08:39:33 2016
  SourcePackage: qemu
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-archive/+bug/1612089/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1606277] Re: log-observe interface is broken in latest snap-confine

2016-08-26 Thread Jamie Strandboge 
This was fixed 1.0.38-0ubuntu0.16.04.3 in xenial.

** Changed in: snap-confine (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1606277

Title:
  log-observe interface is broken in latest snap-confine

Status in Snappy Launcher:
  Fix Released
Status in snap-confine package in Ubuntu:
  Fix Released
Status in snap-confine source package in Xenial:
  Fix Released
Status in snap-confine source package in Yakkety:
  Fix Released

Bug description:
  The log-observe interface is broken due to how we handle bind mounts
  now. This can be seen with 'snappy-debug':

  $ sudo snap install snappy-debug
  $ sudo snap connect snappy-debug:log-observe ubuntu-core:log-observe
  $ sudo /snap/bin/snappy-debug.security scanlog
  kernel.printk_ratelimit = 0
  Traceback (most recent call last):
    File "/snap/snappy-debug/22/bin/snappy-security-scanlog", line 580, in 

  sys.exit(main())
    File "/snap/snappy-debug/22/bin/snappy-security-scanlog", line 569, in main
  from_end=opt.only_new)
    File "/snap/snappy-debug/22/bin/snappy-security-scanlog", line 92, in 
__init__
  self.scan_log(log_file, snap_name, follow, from_end)
    File "/snap/snappy-debug/22/bin/snappy-security-scanlog", line 157, in 
scan_log
  log = open_file_read(log_file)
    File "/snap/snappy-debug/22/bin/snappy-security-scanlog", line 71, in 
open_file_read
  orig = codecs.open(path, 'r', "UTF-8", errors="replace")
    File "/usr/lib/python3.5/codecs.py", line 895, in open
  file = builtins.open(filename, mode, buffering)
  FileNotFoundError: [Errno 2] No such file or directory: '/var/log/syslog'

  This is because /var/log/syslog is not available at runtime due to the bind 
mounts. This can be shown by installing hello-world, adjusting 
/var/lib/snapd/apparmor/profiles/snap.hello-world.sh to have "/**/ r," (to be 
able to read any directory), reloading the profile, then doing:
  $ hello-world.sh
  ...
  bash-4.3$ ls /var/log/
  alternatives.log  btmp dpkg.log  fsck watchdog
  bootstrap.log   dmesg  faillog   lastlog  wtmp

  This may also be a problem with other interfaces, I haven't checked
  extensively, though it seems that /var/lib/extrausers (from the
  nameservice abstraction) won't work right, and (at least) ppp
  (/var/log/ppp) and timezone-control (/usr/share/zoneinfo) are also
  affected.

  WORKAROUND for snappy-debug: launch outside of the launcher:
  $ sudo SNAP=/snap/snappy-debug/current 
PATH=$PATH:/snap/snappy-debug/current/bin 
/snap/snappy-debug/current/bin/snappy-security scanlog

To manage notifications about this bug go to:
https://bugs.launchpad.net/snap-confine/+bug/1606277/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1612305] Re: linux: 4.4.0-36.55 -proposed tracker

2016-08-26 Thread Yung Shen 
Hardware Certification have completed testing this -proposed kernel. No
regressions were observed, results are available here:
http://people.canonical.com/~hwcert/sru-testing/xenial/4.4.0-36.55
/xenial-proposed-frozen.html

** Tags added: certification-testing-passed

** Changed in: kernel-sru-workflow/certification-testing
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1612305

Title:
  linux: 4.4.0-36.55 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  Fix Released
Status in Kernel SRU Workflow certification-testing series:
  Fix Released
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-36.55 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see:
  https://wiki.ubuntu.com/Kernel/kernel-sru-workflow

  -- swm properties --
  derivative-trackers-created: true
  phase: Promoted to proposed
  proposed-announcement-sent: true
  proposed-testing-requested: true

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1612305/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1582767] Re: apparmor permissions missing for winbind

2016-08-26 Thread ChristianEhrhardt 
Hi,
just to note I'd consider this not important enough for an SRU given the fact 
that it is a very rare case and people can add the rule themselves if the need 
to.

** Changed in: ntp (Ubuntu Xenial)
   Status: New => Won't Fix

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1582767

Title:
  apparmor permissions missing for winbind

Status in ntp package in Ubuntu:
  Fix Released
Status in ntp source package in Xenial:
  Won't Fix

Bug description:
  When using Winbind, ntpd needs to access the Winbind pipe:

  May 17 16:23:15 bo kernel: [   27.598551] type=1400
  audit(1463494995.048:18): apparmor="DENIED" operation="connect"
  profile="/usr/sbin/ntpd" name="/run/samba/winbindd/pipe" pid=1517
  comm="ntpd" requested_mask="rw" denied_mask="rw" fsuid=0 ouid=0

  Would there be any reason not to allow this ? I added the following
  line to /etc/apparmor/init/network-interface-security/usr.sbin.ntpd:

  /run/samba/winbindd/pipe rw,

  Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ntp/+bug/1582767/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1579246] Re: [SRU]handle 802.1x on ethernet properly

2016-08-26 Thread Mathew Hodson 
** Changed in: network-manager-applet (Ubuntu Xenial)
   Importance: Undecided => High

** Project changed: network-manager => network-manager-applet

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1579246

Title:
  [SRU]handle 802.1x on ethernet properly

Status in Network Manager Applet:
  Fix Released
Status in network-manager-applet package in Ubuntu:
  Fix Released
Status in network-manager-applet source package in Xenial:
  Fix Committed

Bug description:
  [Impact]

  nm-applet does not save passwords for 802.1X on Ethernet connections,
  thus users will need to input password every time when connecting to
  it.

  [Test case]

  Connect to an 802.1X enabled Ethernet port, choose save password when
  authentication. Disconnect the network and reconnect, users should not
  be prompted again for credentials.

  [Regression potential]

  The fix is a one liner that only deals with secrets handling of
  certain time, potential of regression is minimal.

To manage notifications about this bug go to:
https://bugs.launchpad.net/network-manager-applet/+bug/1579246/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1529815] Re: InfiniBand DHCP flow with PRA and DHCP relay not working

2016-08-26 Thread Mathew Hodson 
** Changed in: isc-dhcp (Ubuntu Wily)
   Status: Fix Committed => Won't Fix

** Tags removed: verification-needed-wily

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1529815

Title:
  InfiniBand DHCP flow with PRA and DHCP relay not working

Status in isc-dhcp package in Ubuntu:
  Fix Released
Status in isc-dhcp source package in Trusty:
  Fix Committed
Status in isc-dhcp source package in Wily:
  Won't Fix
Status in isc-dhcp source package in Xenial:
  Fix Released

Bug description:
  [Impact]

   * Infiniband users relying on DHCP can't use DHCP relay.

  [Test Case]

   * Comment #13
   * Mellanox has tested themselves.
   * Clear way of knowing if fix worked (tcpdump).

  [Regression Potential]

   * Only related to Infiniband.
   * Infiniband support could stop working (unlikely, already tested).

  [Other Info]

  DHCP client is sending discover with Unicast type request for the
  offer, in this configuration of IB to ETH through a relay we need the
  type to be broadcast.

  The issue is that when using dhclient from the client on Ubuntu (and only on 
Ubuntu) with MOFED or inbox driver, we see that that DHCP server offers in 
unicast instead of broadcast. It seems there is no way to correct this from the 
client side using dhclient configuration file.
  this issue exist even when we use always-broadcast statement in configuration 
file.

  in other vendors we see that discover request type is broadcast.
  attached pcap files from working (other vendor) and not working (Ubuntu) 
clients.

  DHCP CLIENT (IPoIB)
  Ubuntu 14.04  kernel 3.13.0-74
  Mellanox OFED 3.1-1.0.3 or inbox driver
  isc-dhcp-client  4.2.4-7ubuntu12.3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1529815/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1609733] Re: glance-common package doesn't contains dependencies/files for using cinder store

2016-08-26 Thread Edward Hope-Morley 
https://review.openstack.org/#/c/348336/

** Also affects: glance (Juju Charms Collection)
   Importance: Undecided
   Status: New

** Changed in: glance (Juju Charms Collection)
   Status: New => Fix Committed

** Changed in: glance (Juju Charms Collection)
Milestone: None => 16.10

** Changed in: glance (Juju Charms Collection)
 Assignee: (unassigned) => Andrey Pavlov (apavlov-e)

** Changed in: glance (Juju Charms Collection)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1609733

Title:
  glance-common package doesn't contains dependencies/files for using
  cinder store

Status in python-glance-store package in Ubuntu:
  Fix Released
Status in python-glance-store source package in Xenial:
  Fix Committed
Status in python-glance-store source package in Yakkety:
  Fix Released
Status in glance package in Juju Charms Collection:
  Fix Committed

Bug description:
  glance is being installed from debian packages can not be used with
  storing images in cinder.

  1) python-glance-store package doesn't depend from 'python-cinderclient', 
'oslo.rootwrap' and 'os-brick'
  I thing that is due to strange 'extra' dependencies definition in the pip 
package https://pypi.python.org/pypi/glance_store/0.15.0

  information from the url: http://packages.ubuntu.com/xenial/python-
  glance-store

  2) glance-common debian package doesn't contain files for rootwrap 
functionality -
  /etc/glance/rootwrap.conf
  /etc/sudoers.d/glance_sudoers
  and directory /etc/glance/rootwrap.d

  from the url: http://packages.ubuntu.com/xenial/all/glance-
  common/filelist

  for example in nova-common -
  http://packages.ubuntu.com/xenial/all/nova-common/filelist

  maybe glance-store should contain these files because it contains file
  /usr/bin/python2-glance-rootwrap

  1) Ubuntu 14.04 with repositories where glance of version 12.0.0 is available 
(installed by Ubuntu Juju Chrams)
  2) glance version is 12.0.0
  3) I expect that all needed files/packages are installed and all that I need 
- is to change glance.conf and restart glance-api
  4) I need to install packages, create files.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/python-glance-store/+bug/1609733/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1615449] Re: Use upstream manpages instead of stub Debian-provided man page

2016-08-26 Thread Martin Pitt 
This bug was fixed in the package p11-kit - 0.23.2-5
Sponsored for Jeremy Bicha (jbicha)

---
p11-kit (0.23.2-5) unstable; urgency=medium

  * Build and ship upstream manpages. (Thanks, Julien Cristau)
+ Add b-d on gtk-doc-tools.
+ Pass --enable-doc to ./configure.
+ Drop minimal debian/p11-kit.1 manpage.
Closes: #834992

 -- Andreas Metzler   Sun, 21 Aug 2016 16:03:45
+0200

** Changed in: p11-kit (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1615449

Title:
  Use upstream manpages instead of stub Debian-provided man page

Status in p11-kit package in Ubuntu:
  Fix Released
Status in p11-kit source package in Xenial:
  New

Bug description:
  Impact
  ==
  The Debian provided stub manpage is not very useful. Now that upstream 
includes manpages, we should build and ship those instead.

  This replaces p11-kit1. with the much more verbose and useful
  trust.1, pkcs11.conf.5 and p11-kit.8

  Test Case
  
  Run man p11-kit, man trust and man pkcs11.conf

  Regression Potential
  
  For yakkety, please sync p11-kit 0.23.2-5.

  For xenial, I am including a debdiff to backport the changes from
  0.23.2-4 and 0.23.2-5 with the exception of enabling all hardening
  flags since I think the SRU policy discourages making changes like
  that.

  0.23.2-4 updates the package descriptions in debian/control.

  Please sync p11-kit 0.23.2-5 (main) from Debian unstable (main)

  Changelog entries since current yakkety version 0.23.2-4:

  p11-kit (0.23.2-5) unstable; urgency=medium

* Build and ship upstream manpages. (Thanks, Julien Cristau)
  + Add b-d on gtk-doc-tools.
  + Pass --enable-doc to ./configure.
  + Drop minimal debian/p11-kit.1 manpage.
  Closes: #834992

   -- Andreas Metzler   Sun, 21 Aug 2016 16:03:45
  +0200

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/p11-kit/+bug/1615449/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1577049] Re: Switch user feature has disappeared from GNOME Shell since upgrade from 15.10 to 16.04

2016-08-26 Thread Launchpad Bug Tracker 
This bug was fixed in the package accountsservice - 0.6.40-2ubuntu15

---
accountsservice (0.6.40-2ubuntu15) yakkety; urgency=medium

  [ Laurent Bigonville ]
  *  Drop the -dbg package and rely on the automatically built -dbgsym one

  [ Jeremy Bicha ]
  * 0014-libsystemd.patch:
- Backport patch to adapt to systemd 209, fixes missing "Switch User"
  functionality in GNOME Shell (LP: #1577049)
  * debian/control:
- Bump minimum systemd for above patch
- Drop build-dependencies only needed for obsolete pam-pin

 -- Jeremy Bicha   Thu, 25 Aug 2016 21:15:10 -0400

** Changed in: accountsservice (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1577049

Title:
  Switch user feature has disappeared from GNOME Shell since upgrade
  from 15.10 to 16.04

Status in accountsservice:
  Unknown
Status in Ubuntu GNOME:
  Fix Committed
Status in accountsservice package in Ubuntu:
  Fix Released
Status in accountsservice source package in Xenial:
  In Progress
Status in accountsservice package in Debian:
  Fix Released

Bug description:
  Impact
  ==
  Ubuntu 16.04's accountsservice was built without systemd support because 
systemd dropped libsystemd-login because that functionality was merged into 
libsystemd.

  At a minimum, this broke GNOME Shell's "Switch User" feature.

  Test Case
  =
  1. From Ubuntu GNOME 16.04.1, install the updated accountsservice packages.
  2. Add a user if necessary to ensure you have at least 2 user accounts 
configured.
  3. Reload gnome-shell. You can do this with Alt+F2 and entering the lower 
case letter r. Or you can log out of all user accounts and log back in.
  4. Click the system status area in the top right of GNOME Shell.
  5. Click your user name. "Switch User" should appear in the list.

  Regression Potential
  
  None.
  The one-line change to accountsservice's configure check was made in Debian's 
accountsservice 0.6.40-3 a year ago(!). The patch is upstreamed and was 
included in accountsservice 0.6.42 released in June.

To manage notifications about this bug go to:
https://bugs.launchpad.net/accountsservice/+bug/1577049/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1617155] Re: Sync cracklib2 2.9.2-3 (main) from Debian unstable (main)

2016-08-26 Thread Martin Pitt 
This bug was fixed in the package cracklib2 - 2.9.2-3
Sponsored for Jeremy Bicha (jbicha)

---
cracklib2 (2.9.2-3) unstable; urgency=medium

  * Fix "Buffer overflow processing long words" by applying patch from
https://build.opensuse.org/package/view_file/Base:System/cracklib/
0004-overflow-processing-long-words.patch (Closes: #835386)
  * remove obsolete debian/pycompat
  * change Vcs-* fields to https variants
  * Bump Standards-Version to 3.9.8 (no changes)
  * Fix "FTCBFS: invokes host-arch executable cracklib-packer" by applying
Helmut Grohne's patch to fix cross compilation (Closes: #792860)

 -- Jan Dittberner   Thu, 25 Aug 2016 17:29:17 +0200

cracklib2 (2.9.2-2) unstable; urgency=medium

  * Fix "CVE-2016-6318: Stack-based buffer overflow when parsing large
GECOS field" by applying patch by Salvatore Bonaccorso (Closes: #834502)

 -- Jan Dittberner   Tue, 23 Aug 2016 18:50:44 +0200

** Also affects: cracklib2 (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Changed in: cracklib2 (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1617155

Title:
  Sync cracklib2 2.9.2-3 (main) from Debian unstable (main)

Status in cracklib2 package in Ubuntu:
  Fix Released
Status in cracklib2 source package in Xenial:
  New
Status in cracklib2 package in Debian:
  Fix Released

Bug description:
  Please sync cracklib2 2.9.2-3 (main) from Debian unstable (main)

  Changelog entries since current yakkety version 2.9.2-1build2:

  cracklib2 (2.9.2-3) unstable; urgency=medium

* Fix "Buffer overflow processing long words" by applying patch from
  https://build.opensuse.org/package/view_file/Base:System/cracklib/
  0004-overflow-processing-long-words.patch (Closes: #835386)
* remove obsolete debian/pycompat
* change Vcs-* fields to https variants
* Bump Standards-Version to 3.9.8 (no changes)
* Fix "FTCBFS: invokes host-arch executable cracklib-packer" by applying
  Helmut Grohne's patch to fix cross compilation (Closes: #792860)

   -- Jan Dittberner   Thu, 25 Aug 2016 17:29:17 +0200

  cracklib2 (2.9.2-2) unstable; urgency=medium

* Fix "CVE-2016-6318: Stack-based buffer overflow when parsing large
  GECOS field" by applying patch by Salvatore Bonaccorso (Closes: #834502)

   -- Jan Dittberner   Tue, 23 Aug 2016 18:50:44 +0200

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cracklib2/+bug/1617155/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp